Punching Shear Failure of Concrete Ground Supported Slab
Source abstract
Abstract
The article handles potential approaches to design and determination of total load capacity of foundation slabs and floors. The research is focused on punching shear failure of reinforced ground supported slab. The article presents detailed results of the experiment made and advanced numerical modelling based on nonlinear analysis and application of fracture-plastic model. The experiment made included a 2.0 × 1.95 m reinforced concrete slab-on-ground of 120 mm thickness. The experiment was followed by a parametric study of total load capacity calculation with nonlinear analysis which is supplemented by calculations based on existing design model code.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Engineering and Materials Analysis · Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Aboutalebi, M., Alani, A., Rizzuto, J., & Beckett, D. (2014). Structural behaviour and deformation patterns in loaded plain concrete ground-supported slabs. Structural Concrete, 15(1), 81–93. https://doi.org/10.1002/suco.201300043 .10.1002/suco.201300043 ↗
2. Alani, A. M., & Beckett, D. (2013). Mechanical properties of a large scale synthetic fibre reinforced concrete ground slab. Construction and Building Materials, 41, 335–344. https://doi.org/10.1016/j.conbuildmat.2012.11.043 .10.1016/j.conbuildmat.2012.11.043 ↗
3. ASCE. (1982). Finite element analysis of reinforced concrete. State of the Art Rep. No. 1982.
4. Barzegar, F. (1988). Layering of RC membrane and plate elements in nonlinear analysis. Journal of the Struct. Div., 114(11), 2474–2492.10.1061/(ASCE)0733-9445(1988)114:11(2474) ↗
5. Bazant, Z. P., Caner, F. C., Carol, I., Adley, M. D., & Akers, S. A. (2000). Microplane model M4 for concrete. I: Formulation with work-conjugate deviatoric stress. Journal of Engineering Mechanics ASCE, 126(9), 944–961.10.1061/(ASCE)0733-9399(2000)126:9(944) ↗
6. Bazant, Z., & Planas, J. (1998). Fracture and size effect in concrete and other quasibrittle materials. Boca Raton: CRC Press.
7. Bogdándy, B., & Hegedűs, I. (2016). Determination of the punching cross-section of reinforced concrete flat slabs. Periodica Polytechnica Civil Engineering., 60(3), 405–411. https://doi.org/10.3311/ppci.8178 .10.3311/PPci.8178 ↗
8. Cajka, R. (2014). Comparison of the calculated and experimentally measured values of settlement and stress state of concrete slab on subsoil. Applied Mechanics and Materials, 501, 867–876.10.4028/www.scientific.net/AMM.501-504.867 ↗
9. Cervenka, V., Jendele, L., & Cervenka, J. (2007). ATENA program documentation—part 1: Theory. Pratur: Cervenka Consulting.
10. Cervenka, J., & Papanikolaou, V. K. (2008). Three dimensional combined fracture-plastic material model for concrete. International Journal of Plasticity, 24(12), 2192–2220. https://doi.org/10.1016/j.ijplas.2008.01.004 .10.1016/j.ijplas.2008.01.004 ↗
11. EC2. (2006). ČSN EN 1992-1-1, Eurocode 2: Design of concrete structures—Part 1-1: General rules and rules for buildings.
12. Halvonik, J., & Fillo, L. (2013). The maximum punching shear resistance of flat slabs. Procedia Engineering, 65, 376–381.10.1016/j.proeng.2013.09.058 ↗
13. Hegger, J., Ricker, M., Ulke, B., & Ziegler, M. (2007). Investigations on the punching behaviour of reinforced concrete footings. Engineering Structures, 29, 2233–2241. https://doi.org/10.1016/j.engstruct.2006.11.012 .10.1016/j.engstruct.2006.11.012 ↗
14. Hegger, J., Sherif, G. A., & Ricker, M. (2006). Experimental investigations on punching behavior of reinforced concrete footings. ACI Structural Journal, 103, 604–613.
15. Hoang, L. C., & Pop, A. (2016). Punching shear capacity of reinforced concrete slabs with headed shear studs. Magazine of Concrete, 68(3), 118–126.10.1680/macr.15.00033 ↗
16. Husain, M., Eisa, A. S., & Roshdy, R. (2017). Alternatives to enhance flat slab ductility. International Journal of Concrete Structures and Materials, 11(1), 161–169. https://doi.org/10.1007/s40069-016-0180-5 .10.1007/s40069-016-0180-5 ↗
17. Ibrahim, M., & Metwally, I. M. (2014). Three-dimensional finite element analysis of reinforced concrete slabs strengthened with epoxy-bonded steel plates. Advances in Concrete Construction, 2(2), 91–108. https://doi.org/10.12989/acc.2014.2.2.091 .10.12989/acc.2014.2.2.091 ↗
18. ISO. (1998). General principles on reliability for structures, ISO 2394.
19. JCSS. (2016). Probabilistic model code. JCSS Working Material. http://www.jcss.ethz.ch/ .
20. Kolář, V., & Němec, I. (1989). Modelling of soil-structure interaction. New York: Elsevier. ISBN 04-449-8859-9.
21. Kotsovou, M. G., Kotsovos, M. G., & Vougioukas, E. (2016). Assessment of design methods for punching through numerical experiments. Computers and Concrete, 17(3), 305–322. https://doi.org/10.12989/cac.2016.17.3.305 .10.12989/cac.2016.17.3.305 ↗
22. Kueres, D., Siburg, C., Herbrand, M., Classen, M., & Hegger, J. (2017). Uniform design method for punching shear in flat slabs and column bases. Engineering Structures, 136(1), 149–164. https://doi.org/10.1016/j.engstruct.2016.12.064 .10.1016/j.engstruct.2016.12.064 ↗
23. Lahuta, H., Hrubesova, E., Duris, L., & Petrasova, T. (2015). Behaviour subsoil of slab foundation under loading. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, 2(1), 119–126.
24. Model Code 1990. (1993). Final draft, fib, Bulletin
25. Model Code 2010. (2012). Final draft, fib, Bulletin no. 65 and 66, 1–2
26. Norm ACI 318-08. (2008). Building code requirements for structural concrete (ACI 318-08) and commentary (ACI 318-08)
27. Norm SIA 262. (2003). April 2003. Betonbau—Schweizer Norm SN 505 262
28. Ricker, M., & Siburg, C. (2016). Punching shear strength of flat slabs—critical review of Eurocode 2 and fib Model Code 2010 design provisions. Structural Concrete, 17(3), 457–468.10.1002/suco.201500106 ↗
29. Sarfarazi, V., et al. (2016). A new approach for measurement of tensile strength of concrete. Periodica Polytechnica Civil Engineering., 60(2), 199–203. https://doi.org/10.3311/PPci.8328 .10.3311/PPci.8328 ↗
30. Siburg, C., Häusler, F., & Hegger, J. (2012). Flat slab punching design according to German annex of Eurocode 2 [Durchstanzen von flachdecken nach NA(D) zu Eurocode 2]. Bauingenieur, 8(5), 216–225.
31. Siburg, C., & Hegger, J. (2014). Experimental investigations on the punching behaviour of reinforced concrete footings with structural dimensions. Structural Concrete, 15(3), 331–339. https://doi.org/10.1002/suco.201300083 .10.1002/suco.201300083 ↗
32. Siburg, C., Ricker, M., & Hegger, J. (2014). Punching shear design of footings: critical review of different code provisions. Structural Concrete., 15(4), 497–508. https://doi.org/10.1002/suco.201300092 .10.1002/suco.201300092 ↗
33. Song, J.-K., Kim, J., Song, H.-B., & Song, J.-W. (2012). Effective punching shear and moment capacity of flat plate-column connection with shear reinforcements for lateral loading. International Journal of Concrete Structures and Materials, 6(1), 19–29. https://doi.org/10.1007/s40069-012-0002-3 .10.1007/s40069-012-0002-3 ↗
34. Sucharda, O., & Konecny, P. (2018). Recommendation for the modelling of 3D non-linear analysis of RC beam tests. Computers and Concrete, 21(1), 11–20. https://doi.org/10.12989/cac.2018.21.1.011 .10.12989/cac.2018.21.1.011 ↗
35. Sucharda, O., Pajak, M., Ponikiewski, T., & Konecny, P. (2017). Identification of mechanical and fracture properties of self-compacting concrete beams with different types of steel fibres using inverse analysis. Construction and Building Materials, 138, 263–275. https://doi.org/10.1016/j.conbuildmat.2017.01.077 .10.1016/j.conbuildmat.2017.01.077 ↗
36. Vecchio, F. J., & Shim, W. (2004). Experimental and analytical reexamination of classic concrete beam tests. Journal of Structural Engineering., 130(3), 460–469.10.1061/(ASCE)0733-9445(2004)130:3(460) ↗
37. Zabulionis, D., Sakinis, D., & Vainiunas, P. (2006). Statistical analysis of design codes calculation methods for punching sheer resistance in column-to-slab connections. Journal of Civil Engineering and Management, 12, 205–213. https://doi.org/10.1080/13923730.2006.9636394 .10.1080/13923730.2006.9636394 ↗