Advances on the Behavior Characterization of FRP-Anchored Carbon Fiber-Reinforced Polymer (CFRP) Sheets Used to Strengthen Concrete Elements
Source abstract
Abstract
Strengthening concrete structures using FRP composites is a commonly considered technology in many practical situations. The success of the strengthening intervention largely depends on adequate bond between FRP sheets and the concrete substrate. In recent years, techniques to anchor FRP sheets in applications where sheets must develop strength in a short length have been proposed. One of these techniques includes use of FRP anchors embedded into the concrete substrate and forming part of the composite strengthening system. This paper presents the results of studies conducted recently at the University of Massachusetts Amherst to advance the understanding on the behavior of FRP anchored systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Bizindavyi, & Neale, (1999). Transfer lengths and bond strengths for composites bonded to concrete. Journal of Composites for Construction,3(4), 153–160.10.1061/(ASCE)1090-0268(1999)3:4(153) ↗
2. Breña, S. F., Bramblett, R. M., Wood, S. L., & Kreger, M. E. (2003). Increasing the flexural capacity of RC beams using CFRP composites. ACI Structural Journal,100(1), 36–46.
3. Chajes, M. J., Finch, W. W. Jr, Januszka, T. F., & Thomson, T. A. Jr. (1996). Bond and force transfer of composite material plates bonded to concrete. ACI Structural Journal,93(2), 295–303.
4. Coronado, C. A., & Lopez, M. M. (2008). Experimental characterization of concrete-epoxy interfaces. Journal of Materials in Civil Engineering,20(4), 303–312.10.1061/(ASCE)0899-1561(2008)20:4(303) ↗
5. Elsayed, W. E., Ebead, U. A., & Neale, K. W. (2009). Studies on mechanically fastened fiber-reinforced polymer strengthening systems. ACI Structural Journal,106(1), 49–59.
6. Eshwar, N., Nanni, A., & Ibell, T. J. (2008). Performance of two anchor systems of externally bonded fiber-reinforced polymer laminates. ACI Materials Journal,105(1), 72–80.
7. Khalifa, A., Alkhrdaji, T., Nanni, A., & Lansburg, S. (1999). Anchorage of surface mounted FRP reinforcement. Concrete International,21(10), 49–54.
8. Kim, S. J., & Smith, S. T. (2009). Shear strength and behaviour of FRP spike anchors in cracked concrete. In Proceedings of FRPRCS-9, Sydney, Australia.
9. Kotynia, R., Baky, H. A., Neale, K. N., & Ebead, U. A. (2008). Flexural strengthening of RC beams with externally bonded CFRP systems: Test results and 3D nonlinear FE analysis. Journal of Composites for Construction,12(2), 190–201.10.1061/(ASCE)1090-0268(2008)12:2(190) ↗
10. Lu, X. Z., Teng, J. G., Ye, L. P., & Jiang, J. J. (2005). Bond-slip models for FRP sheets/plates bonded to concrete. Engineering Structures,27, 920–937.10.1016/j.engstruct.2005.01.014 ↗
11. Mazzotti, C., Savoia, M., & Ferracuti, B. (2009). A new single-shear set-up for stable debonding of FRP-concrete joints. Construction and Building Materials,23(4), 1529–1537.10.1016/j.conbuildmat.2008.04.003 ↗
12. McGuirk, G. N., & Breña, S. F. (2012). Development of anchorage system for FRP strengthening applications using integrated FRP composite anchors. Report No. CRC #54, ACI Concrete Research Council, 277 pp.
13. Nakaba, K., Kanakubo, T., Furuta, T., & Yoshizawa, H. (2001). Bond behavior between fiber-reinforced polymer laminates and concrete. ACI Structural Journal,98(3), 359–367.
14. Niemitz, C. W., James, R., & Breña, S. F. (2010). Experimental behavior of carbon fiber-reinforced polymer (CFRP) sheets attached to concrete surfaces using CFRP anchors. Journal of Composites for Construction,14(2), 185–194.10.1061/(ASCE)CC.1943-5614.0000064 ↗
15. Orton, S. L., Jirsa, J. O., & Bayrak, O. (2008). Design considerations of carbon fiber anchors. Journal of Composites for Construction,12(6), 608–616.10.1061/(ASCE)1090-0268(2008)12:6(608) ↗
16. Ozbakkaloglu, T., & Saatcioglu, M. (2009). Tensile behavior of FRP anchors in concrete. Journal of Composites for Construction,13(2), 82–92.10.1061/(ASCE)1090-0268(2009)13:2(82) ↗
17. Pellegrino, C., Tinazzi, D., & Modena, C. (2008). Experimental study on bond behavior between concrete and FRP reinforcement. Journal of Composites for Construction,12(2), 180–189.10.1061/(ASCE)1090-0268(2008)12:2(180) ↗
18. Popovics, S. (1973). A numerical approach to the complete stress–strain curve of concrete. Cement and Concrete Research,3(5), 583–599.10.1016/0008-8846(73)90096-3 ↗
19. Smith, S. T., & Teng, J. C. (2002a). FRP-strengthened RC beams-I: Review of debonding strength models. Engineering Structures,24(4), 385–395.10.1016/S0141-0296(01)00105-5 ↗
20. Smith, S. T., & Teng, J. C. (2002b). FRP-strengthened RC beams-II: Assesment of debonding strength models. Engineering Structures,24(4), 397–417.10.1016/S0141-0296(01)00106-7 ↗
21. Subramaniam, K. V., Carloni, C., & Nobile, L. (2007). Width effect in the interface fracture during shear debonding of FRP sheets from concrete. Engineering Fracture Mechanics,74(4), 578–594.10.1016/j.engfracmech.2006.09.002 ↗
22. Yao, J., Teng, J. G., & Chen, J. F. (2005). Experimental study on FRP-to-concrete bonded joints. Composites: Part B,36, 99–113.10.1016/j.compositesb.2004.06.001 ↗