A Review on Sustainable Fabrication of Futuristic Cementitious Binders Based on Application of Waste Concrete Powder, Steel Slags, and Coal Bottom Ash
Source abstract
Abstract
Abstract The amendment of cementitious binders with waste materials aids as a path to reduce the volume of waste and carbon emission. This review summarizes the current state of practice for cementitious binder fabrication in favor to the utilization of waste materials such as waste concrete powder (WCP), coal bottom ash (CBA) and steel slags. These materials have the potential to be employed as cementitious material, however much of the application is still up to the laboratory scale. This manuscript will serve as the support to understand the utilization of mentioned waste as nontraditional cementitious products. The highlighted areas likely need more refinement and research with indication on possible negative impact on application of wastes. The use of the aforementioned wastes for blending with OPC (ordinary Portland cement) can reduce carbon emissions from cement manufacturing. Additionally, it can also reduce the use of natural resources during clinker production.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Coal and Its By-products
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Abdulmatin, A., Tangchirapat, W., & Jaturapitakkul, C. (2018). An investigation of bottom ash as a pozzolanic material. Construction and Building Materials, 186, 155–162.10.1016/j.conbuildmat.2018.07.101 ↗
2. Adolfsson, D. (2011). Cementitious properties of steelmaking slags. Luleå tekniska universitet.
3. Agarwal, S., Vanguri, S., Chaturvedi, S. K., Kumar, A., & Reddy, A. S. Performance evaluation of granulated BF slag–steel slag based Portland slag cement. In: 15th International seminar on cement, concrete and building materials, New Delhi. 2017.
4. Aggarwal, Y., & Siddique, R. (2014). Microstructure and properties of concrete using bottom ash and waste foundry sand as partial replacement of fine aggregates. Construction and Building Materials, 54, 210–223.10.1016/j.conbuildmat.2013.12.051 ↗
5. Aghili Lotf, M., Ramezanianpour, A. M., & Habibi, A. (1970). Utilization of recycled concrete powder as cement replacement or filler in Masonry Mortar. Concrete Research, 11(4), 133–143.
6. Akhtar, A., & Sarmah, A. K. (2018). Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective. Journal of Cleaner Production, 186, 262–281.10.1016/j.jclepro.2018.03.085 ↗
7. Alimohammadi, H. (2021). Rutting behavior of laboratory, field, and finite element simulated hot mix and warm mix asphalt overlays. Iowa State University.
8. Alimohammadi, H., Dastjerdi, K. Y., & Yaghin, M. L. (2020). The study of progressive collapse in dual systems. Civil and Environmental Engineering, 16(1), 79–85.10.2478/cee-2020-0009 ↗
9. Alimohammadi, H., Zheng, J., Buss, A., Schaefer, V. R., Williams, C., & Zheng, G. (2021). Finite element viscoelastic simulations of rutting behavior of hot mix and warm mix asphalt overlay on flexible pavements. International Journal of Pavement Research and Technology, 14(6), 708–719.10.1007/s42947-020-0057-5 ↗
10. Altun, I. A., & Yılmaz, İ. (2002). Study on steel furnace slags with high MgO as additive in Portland cement. Cement and Concrete Research, 32(8), 1247–1249.10.1016/S0008-8846(02)00763-9 ↗
11. Amin, M. N., Khan, K., Saleem, M. U., Khurram, N., & Niazi, M. U. K. (2017). Aging and curing temperature effects on compressive strength of mortar containing lime stone quarry dust and industrial granite sludge. Materials, 10(6), 642.10.3390/ma10060642 ↗
12. Ampadu, K. O., & Torii, K. (2002). Chloride ingress and steel corrosion in cement mortars incorporating low-quality fly ashes. Cement and Concrete Research, 32(6), 893–901.10.1016/S0008-8846(02)00721-4 ↗
13. Ashrit, S., Banerjee, P. K., Chatti, R. V., Venugopal, R., & Udayabhanu, G. (2015). Characterization of gypsum synthesized from LD slag fines generated at a waste recycling plant of a steel plant. New Journal of Chemistry, 39(5), 4128–4134.10.1039/C4NJ02023E ↗
14. ASTM Committee C-09 on Concrete and Concrete Aggregates. (2013). Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM international.
15. Bernardo, G., Marroccoli, M., Nobili, M., Telesca, A., & Valenti, G. L. (2007). The use of oil well-derived drilling waste and electric arc furnace slag as alternative raw materials in clinker production. Resources, Conservation and Recycling, 52(1), 95–102.10.1016/j.resconrec.2007.02.004 ↗
16. Bignozzi, M.C., Barbieri, L ., & Lancellotti, I. (2010). New geopolymers based on electric arc furnace slag. In: Advances in Science and Technology. 2010. Trans Tech Publ.10.4028/www.scientific.net/AST.69.117 ↗
17. Chand, S., Paul, B., & Kumar, M. (2016). A comparative study of physicochemical and mineralogical properties of LD Slag from some selected steel plants in India. Journal of Environmental Science and Technology, 9(1), 75.10.3923/jest.2016.75.87 ↗
18. Chand, S., Paul, B., & Kumar, M. (2017). Short-term leaching study of heavy metals from LD slag of important steel industries in Eastern India. Journal of Material Cycles & Waste Management, 19(2), 851–862.10.1007/s10163-016-0486-z ↗
19. Chandrasekhar, S. (2016). An experimental study on mud concrete using soil as a fine aggregate and LD slag as coarse aggregate. Int J Res Eng Technol, 5, 264–268.10.15623/ijret.2016.0504051 ↗
20. Chen, D.P., C.L. Liu, & C.X. Qian. Study on shrinkage and cracking performance of SAP-modified concrete. in Materials Science Forum. 2011. Trans Tech Publ.10.4028/www.scientific.net/MSF.675-677.697 ↗
21. Chen, X., Li, Y., Bai, H., & Ma, L. (2021). Utilization of Recycled Concrete Powder in Cement Composite: Strength, Microstructure and Hydration Characteristics. Journal of Renewable Materials, 9(12), 2189.10.32604/jrm.2021.015394 ↗
22. Chen, D.-S., Zhao, L. S., Tao, Q. I., Hu, G. P., Zhao, H. X., Jie, L. I., & Wang, L. N. (2013). Desilication from titanium–vanadium slag by alkaline leaching. Transactions of Nonferrous Metals Society of China, 23(10), 3076–3082.10.1016/S1003-6326(13)62836-8 ↗
23. Chinnaraju, K., Ramkumar, V. R., Lineesh, K., Nithya, S., & Sathish, V. (2013). Study on concrete using steel slag as coarse aggregate replacement and eco sand as fine aggregate replacement. IJREAT International Journal of Research in Engineering & Advanced Technology, 1(3), 65–69.
24. Cong, L., Jialin, L., Jing, C., Hailun, W., & Dong, L. Study on the Application of Recycled Fine Powder in Ready-Mixed Concrete. in MATEC Web of Conferences. 2019. EDP Sciences.10.1051/matecconf/201927801010 ↗
25. Conjeaud, M., George, C., & Sorrentino, F. (1981). A new steel slag for cement manufacture: Mineralogy and hydraulicity. Cement and Concrete Research, 11(1), 85–102.10.1016/0008-8846(81)90012-0 ↗
26. Cristelo, N., Garcia-Lodeiro, I., Rivera, J. F., Miranda, T., Palomo, Á., Coelho, J., & Fernández-Jiménez, A. (2021). One-part hybrid cements from fly ash and electric arc furnace slag activated by sodium sulphate or sodium chloride. Journal of Building Engineering, 44, 103298.10.1016/j.jobe.2021.103298 ↗
27. da Costa Borges, A., Gadioli, M. C. B., Pinto, L. A. B., & de Oliveira, J. R. (2012). Mixture of granite waste and LD steel slag for use in cement production. In: Materials Science Forum. Trans Tech Publ.10.4028/www.scientific.net/MSF.727-728.1535 ↗
28. Das, B., Prakash, S., Reddy, P. S. R., & Misra, V. N. (2007). An overview of utilization of slag and sludge from steel industries. Resources, Conservation and Recycling, 50(1), 40–57.10.1016/j.resconrec.2006.05.008 ↗
29. Daube, J., & Bakker, R. (1986). Portland blast-furnace slag cement: a review. Blended Cements, 198610.1520/STP36388S ↗
30. Dermatas, D., & Meng, X. (2003). Utilization of fly ash for stabilization/solidification of heavy metal contaminated soils. Engineering Geology, 70(3–4), 377–394.10.1016/S0013-7952(03)00105-4 ↗
31. Diaz-Loya, I., Juenger, M., Seraj, S., & Minkara, R. (2019). Extending supplementary cementitious material resources: Reclaimed and remediated fly ash and natural pozzolans. Cement and Concrete Composites, 101, 44–51.10.1016/j.cemconcomp.2017.06.011 ↗
32. Dippenaar, R. (2005). Industrial uses of slag (the use and re-use of iron and steelmaking slags). Ironmaking & Steelmaking, 32(1), 35–46.10.1179/174328105X15805 ↗
33. Dongxue, L., Xinhua, F., Xuequan, W., & Mingshu, T. (1997). Durability study of steel slag cement. Cement and Concrete Research, 27(7), 983–987.10.1016/S0008-8846(97)00084-7 ↗
34. Duda, A. (1989). Hydraulic reactions of LD steelwork slags. Cement and Concrete Research, 19(5), 793–801.10.1016/0008-8846(89)90050-1 ↗
35. Eisa, A. (2014). Properties of concrete incorporating recycled post-consumer environmental wastes. International Journal of Concrete Structures and Materials, 8(3), 251–258.10.1007/s40069-013-0065-9 ↗
36. El-Mahllawy, M. S. (2008). Characteristics of acid resisting bricks made from quarry residues and waste steel slag. Construction and Building Materials, 22(8), 1887–1896.10.1016/j.conbuildmat.2007.04.007 ↗
37. Faleschini, F., Zanini, M. A., Pellegrino, C., & Pasinato, S. (2016). Sustainable management and supply of natural and recycled aggregates in a medium-size integrated plant. Waste Management, 49, 146–155.10.1016/j.wasman.2016.01.013 ↗
38. Forder, B. (2020). World Crude Steel Production—Summary, world steel association, 2020. World steel association.
39. Frías, M., Martínez-Ramírez, S., de la Villa, R. V., Fernández-Carrasco, L., & García, R. (2021). Reactivity in cement pastes bearing fine fraction concrete and glass from construction and demolition waste: Microstructural analysis of viability. Cement and Concrete Research, 148, 106531.10.1016/j.cemconres.2021.106531 ↗
40. Frías, M., De Rojas, M. S., & Uría, A. (2002). Study of the instability of black slags from electric arc furnace steel industry. Materiales De Construcción, 52(267), 79–83.10.3989/mc.2002.v52.i267.328 ↗
41. Gawwad, H., Khater, H. M., & Mohamed, S. (2015). Impact of alkali concentration and metakaolin content on accelerated ageing of Egyptian slag. Am J Chem Eng, 3, 30–38.10.11648/j.ajche.20150303.11 ↗
42. Geiseler, J. (1996). Use of steelworks slag in Europe. Waste Management, 16(1–3), 59–63.10.1016/S0956-053X(96)00070-0 ↗
43. Glukhovsky, V. Ancient, modern and future concretes. In: Proceedings of the First International Conference on Alkaline Cements and Concretes. 1994. Kiev, Ukraine.
44. Grönniger, J., Wistuba, M. P., & Cannone Falchetto A. (2015). Reuse of Linz-Donawitz (LD) slag in asphalt mixtures for pavement application. In: Proceedings of the International Conference on Industrial Wasted and Wastewater Treatment & Valorization, Athens, Greece. 2015.
45. Guo, J., Bao, Y., & Wang, M. (2018). Steel slag in China: Treatment, recycling, and management. Waste Management, 78, 318–330.10.1016/j.wasman.2018.04.045 ↗
46. Guo, X., & Pan, X. (2020). Effects of steel slag on mechanical properties and mechanism of fly ash–based geopolymer. Journal of Materials in Civil Engineering, 32(2), 04019348.10.1061/(ASCE)MT.1943-5533.0003012 ↗
47. Gupta, T., Siddique, S., Sharma, R. K., & Chaudhary, S. (2019). Behaviour of waste rubber powder and hybrid rubber concrete in aggressive environment. Construction and Building Materials, 217, 283–291.10.1016/j.conbuildmat.2019.05.080 ↗
48. Gwon, H. S., Khan, M. I., Alam, M. A., Das, S., & Kim, P. J. (2018). Environmental risk assessment of steel-making slags and the potential use of LD slag in mitigating methane emissions and the grain arsenic level in rice (Oryza sativa L.). Journal of Hazardous Materials, 353, 236–243.10.1016/j.jhazmat.2018.04.023 ↗
49. Haha, M. B., Lothenbach, B., Le Saout, G. L., & Winnefeld, F. (2011). Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag—Part I: Effect of MgO. Cement and Concrete Research, 41(9), 955–963.10.1016/j.cemconres.2011.05.002 ↗
50. Hajmohammadian Baghban, M., Mahjoub, R. (2020). Natural Kenaf Fiber and LC3 Binder for Sustainable Fiber-Reinforced Cementitious Composite: A Review.10.3390/app10010357 ↗
51. Han, F., & Wu, L. (2019). Comprehensive Utilization Technology of Steel Slag. Industrial Solid Waste Recycling in Western China (pp. 305–356). Springer.10.1007/978-981-13-8086-0_6 ↗
52. Herrero, T., Vegas, I. J., Santamaría, A., San-José, J. T., & Skaf, M. (2016). Effect of high-alumina ladle furnace slag as cement substitution in masonry mortars. Construction and Building Materials, 123, 404–413.10.1016/j.conbuildmat.2016.07.014 ↗
53. Hosseini, S., Brake, N. A., Nikookar, M., Günaydın-Şen, Ö., & Snyder, H. A. (2021). Mechanochemically activated bottom ash-fly ash geopolymer. Cement and Concrete Composites, 118, 103976.10.1016/j.cemconcomp.2021.103976 ↗
54. Hossain, M. U., Poon, C. S., Wong, M. Y. K., & Khine, A (2019). Techno-environmental feasibility of wood waste derived fuel for cement production. Journal of Cleaner Production, 230, 663–671.10.1016/j.jclepro.2019.05.132 ↗
55. Huashan, Y., & Yujun, C. (2021). Influences of waste concrete powder on the strength development and hydration products of mortar containing fly ash. Materials Science, 28(1), 106–112.
56. Huntzinger, D. N., & Eatmon, T. D. (2009). A life-cycle assessment of Portland cement manufacturing: Comparing the traditional process with alternative technologies. Journal of Cleaner Production, 17(7), 668–675.10.1016/j.jclepro.2008.04.007 ↗
57. Jain, M. S. (2021). A mini review on generation, handling, and initiatives to tackle construction and demolition waste in India. Environmental Technology & Innovation, 22, 101490.10.1016/j.eti.2021.101490 ↗
58. Jaturapitakkul, C., & Cheerarot, R. (2003). Development of bottom ash as pozzolanic material. Journal of Materials in Civil Engineering, 15(1), 48–53.10.1061/(ASCE)0899-1561(2003)15:1(48) ↗
59. Kamon, M., Tomohisa, S. E. I. S. H. I., Tsubouchi, K. E. N. I. C. H. I., & Nontananandh, S. (1988). Reutilization of waste concrete powder by cement hardening. Journal of the Japanese Society of Materials Science, 37(422), 1260–1265.10.2472/jsms.37.1260 ↗
60. Kasami, H., Hosino, M., Arasima, T., & Tateyasiki, H. (2001). Use of recycled concrete powder in self-compacting concrete. Special Publication, 200, 381–398.
61. Kazi, T., Jamali, M. K., Kazi, G. H., Arain, M. B., Afridi, H. I., & Siddiqui, A. (2005). Evaluating the mobility of toxic metals in untreated industrial wastewater sludge using a BCR sequential extraction procedure and a leaching test. Analytical and Bioanalytical Chemistry, 383(2), 297–304.10.1007/s00216-005-0004-y ↗
62. KhATER, H.M. (2015). Influence of electric arc furnace slag on characterisation of the produced geopolymer composites. Epitoanyag-Journal of Silicate Based & Composite Materials. 67(3).10.14382/epitoanyag-jsbcm.2015.13 ↗
63. Kim, T., & Kang, C. (2020). The Mechanical Properties of Alkali-Activated Slag-Silica Fume Cement Pastes by Mixing Method. International Journal of Concrete Structures and Materials, 14(1), 1–15.10.1186/s40069-020-00416-x ↗
64. Kim, H.-S., Kim, K. S., Jung, S. S., Hwang, J. I., Choi, J. S., & Sohn, I. (2015). Valorization of electric arc furnace primary steelmaking slags for cement applications. Waste Management, 41, 85–93.10.1016/j.wasman.2015.03.019 ↗
65. Kim, J.-H., & Lee, H.-S. (2017). Improvement of early strength of cement mortar containing granulated blast furnace slag using industrial byproducts. Materials, 10(9), 1050.10.3390/ma10091050 ↗
66. Kim, Y. J., & Choi, Y. W. (2012). Utilization of waste concrete powder as a substitution material for cement. Construction and Building Materials, 30, 500–504.10.1016/j.conbuildmat.2011.11.042 ↗
67. Kourounis, S., Tsivilis, S., Tsakiridis, P. E., Papadimitriou, G. D., & Tsibouki, Z. (2007). Properties and hydration of blended cements with steelmaking slag. Cement and Concrete Research, 37(6), 815–822.10.1016/j.cemconres.2007.03.008 ↗
68. Kriskova, L., Pontikes, Y., Cizer, Ö., Mertens, G., Veulemans, W., Geysen, D., & Blanpain, B. (2012). Effect of mechanical activation on the hydraulic properties of stainless steel slags. Cement and Concrete Research, 42(6), 778–788.10.1016/j.cemconres.2012.02.016 ↗
69. Krivenko, P.V. (1994) Alkaline cements. In Proceedings of the 1st International Conference on Alkaline Cements and Concretes, Kiev, Ukraine, 1994. VIPOL Stock Company.
70. Kumar, M. L., & Revathi, V. (2016). Metakaolin bottom ash blend geopolymer mortar–a feasibility study. Construction and Building Materials, 114, 1–5.10.1016/j.conbuildmat.2016.03.149 ↗
71. Kurama, H., & Kaya, M. (2008). Usage of coal combustion bottom ash in concrete mixture. Construction and Building Materials, 22(9), 1922–1928.10.1016/j.conbuildmat.2007.07.008 ↗
72. Kwon, E., Ahn, J., Cho, B., & Park, D. (2015). A study on development of recycled cement made from waste cementitious powder. Construction and Building Materials, 83, 174–180.10.1016/j.conbuildmat.2015.02.086 ↗
73. Lampris, C., Lupo, R., & Cheeseman, C. R. (2009). Geopolymerisation of silt generated from construction and demolition waste washing plants. Waste Management, 29(1), 368–373.10.1016/j.wasman.2008.04.007 ↗
74. Lee, J.-Y., Choi, J. S., Yuan, T. F., Yoon, Y. S., & Mitchell, D. (2019). Comparing properties of concrete containing electric arc furnace slag and granulated blast furnace slag. Materials, 12(9), 1371.10.3390/ma12091371 ↗
75. Lee, J.-W., Jang, Y. I., Park, W. S., Yun, H. D., & Kim, S. W. (2020). The effect of fly ash and recycled aggregate on the strength and carbon Eemission impact of FRCCs. International Journal of Concrete Structures and Materials, 14(1), 1–13.10.1186/s40069-019-0376-6 ↗
76. Li, S., Gao, J., Li, Q., & Zhao, X. (2021). Investigation of using recycled powder from the preparation of recycled aggregate as a supplementary cementitious material. Construction and Building Materials, 267, 120976.10.1016/j.conbuildmat.2020.120976 ↗
77. Li, Q., Quan, H., & Qin, Y. (2010). Performance and application technology of recycled concrete. Chinese Building Materials Industry Publication.
78. Lin, Y. Z., Li, X. M. & Li Y. Q. (2020). Research on rapid detection technology and application of mortar compressive strength based on neural network. In: Materials Science Forum. 2020. Trans Tech Publ.10.4028/www.scientific.net/MSF.996.110 ↗
79. Lind, B., Fällman, A.-M., & Larsson, L. (2001). Environmental impact of ferrochrome slag in road construction. Waste Management, 21(3), 255–264.10.1016/S0956-053X(00)00098-2 ↗
80. Liu, Y., Lu, C., Zhang, H., & Li, J. (2016). Experimental study on chemical activation of recycled powder as a cementitious material in mine paste backfilling. Environmental Engineering Research, 21(4), 341–349.10.4491/eer.2015.129 ↗
81. Luxán, M. P., et al. (2000). Characteristics of the slags produced in the fusion of scrap steel by electric arc furnace. Cement and Concrete Research, 30(4), 517–519.10.1016/S0008-8846(99)00253-7 ↗
82. Ma, X., & Wang Z. (2013). Effect of ground waste concrete powder on cement properties. Advances in Materials Science and Engineering. 2013.10.1155/2013/918294 ↗
83. Maheswara Rao, V., Padma Latha, M., Siva Rao, T., & Nageswara Rao, G. (2006). Mixed ligand complexes of toxic metal ions with L-glutamic acid and L-methionine in urea-water mixtures. Chemical Speciation & Bioavailability, 18(4), 143–151.10.1080/09542299.2006.11073749 ↗
84. Mao, X., Qu, W., & Zhu, P. (2019). Mixture optimization of green reactive powder concrete with recycled powder. Journal of Materials in Civil Engineering, 31(5), 04019033.10.1061/(ASCE)MT.1943-5533.0002663 ↗
85. Marhual, N., Pradhan, N., Mohanta, N. C., Sukla, L. B., & Mishra, B. K. (2011). Dephosphorization of LD slag by phosphorus solubilising bacteria. International Biodeterioration & Biodegradation, 65(3), 404–409.10.1016/j.ibiod.2011.01.003 ↗
86. Maslyk, M., Gäb, T., Matveeva, G., Opitz, P., Mondeshki, M., Krysiak, Y., & Tremel, W. (2022). Multistep crystallization pathways in the ambient-temperature synthesis of a new alkali-cctivated binder. Advanced Functional Materials, 32(7), 2108126.10.1002/adfm.202108126 ↗
87. Mehdizadeh, H., et al. (2021). Effect of particle size and CO2 treatment of waste cement powder on properties of cement paste. Canadian Journal of Civil Engineering, 48(5), 522–531.10.1139/cjce-2019-0574 ↗
88. Menad, N., Kanari, N., & Save, M. (2014). Recovery of high grade iron compounds from LD slag by enhanced magnetic separation techniques. International Journal of Mineral Processing, 126, 1–9.10.1016/j.minpro.2013.11.001 ↗
89. Mirazimi, S., Rashchi, F., & Saba, M. (2013). Vanadium removal from roasted LD converter slag: Optimization of parameters by response surface methodology (RSM). Separation and Purification Technology, 116, 175–183.10.1016/j.seppur.2013.05.032 ↗
90. Mirazimi, S., Rashchi, F., & Saba, M. (2015). A new approach for direct leaching of vanadium from LD converter slag. Chemical Engineering Research and Design, 94, 131–140.10.1016/j.cherd.2014.12.010 ↗
91. Monshi, A., & Asgarani, M. K. (1999). Producing Portland cement from iron and steel slags and limestone. Cement and Concrete Research, 29(9), 1373–1377.10.1016/S0008-8846(99)00028-9 ↗
92. Moon, D. J., Kim, Y. B., & Ryou, J. (2008). An approach for the recycling of waste concrete powder as cementitious materials. Journal of Ceramic Processing Research, 9(3), 278–281.
93. Morita, K., Guo, M., Oka, N., & Sano, N. (2002). Resurrection of the iron and phosphorus resource in steel-making slag. Journal of Material Cycles and Waste Management, 4(2), 93–101.
94. Motz, H., & Geiseler, J. (2000). Products of steel slags an opportunity to save natural resources. Waste Management Series (pp. 207–220). Elsevier.
95. Murphy, J., Meadowcroft, T., & Barr, P. (1997). Enhancement of the cementitious properties of steelmaking slag. Canadian Metallurgical Quarterly, 36(5), 315–331.10.1179/cmq.1997.36.5.315 ↗
96. Murri, A. N., Rickard, W. D. A., Bignozzi, M. C., & Van Riessen, A. (2013). High temperature behaviour of ambient cured alkali-activated materials based on ladle slag. Cement and Concrete Research, 43, 51–61.10.1016/j.cemconres.2012.09.011 ↗
97. Nidheesh, P., & Kumar, M. S. (2019). An overview of environmental sustainability in cement and steel production. Journal of Cleaner Production, 231, 856–871.10.1016/j.jclepro.2019.05.251 ↗
98. Olivier, J.G. & J.A. Peters, Trends in global CO2 and total greenhouse gas emissions: 2017 report. 2017: PBL Netherlands Environmental Assessment Agency The Hague.
99. Oluwasola, E. A., Hainin, M. R., & Aziz, M. (2015). Evaluation of asphalt mixtures incorporating electric arc furnace steel slag and copper mine tailings for road construction. Transportation Geotechnics, 2, 47–55.10.1016/j.trgeo.2014.09.004 ↗
100. Özbay, E., Erdemir, M., & Durmuş, H. İ. (2016). Utilization and efficiency of ground granulated blast furnace slag on concrete properties–A review. Construction and Building Materials, 105, 423–434.10.1016/j.conbuildmat.2015.12.153 ↗