journal article·2026-05-26

Perceptions of mask fit and discomfort among young Japanese post-lifting of mask-wearing mandates

Mika Morishima, Yoshie Mori, Yasuyuki Yamada, Lei Yumoto

Publisher page

Abstract

Purpose Our long-term goal is to develop fit and comfortable household masks. This study aimed to investigate the attitudes of Japanese youth towards wearing masks one year after the mask mandate was lifted, compared to their attitudes before the spread of COVID-19 infection. It also aimed to propose a physical evaluation method to assess the fit of masks. Design/methodology/approach In 2024, a questionnaire was sent to young Japanese men and women to assess their frequency of mask usage, awareness of proper fit, and the problems associated with improper fit. In addition, a pilot study was conducted to measure the distance between the mask and face, using a flat mask with numerous holes and a dummy. Findings Although the proportion of youth who frequently wore masks increased, the proportion of men and women who did not wear them remained the same as before the spread of infection. In addition, a significantly high proportion paid attention to the fit and reported that their masks fit them well. The distribution of the mask–face gap was illustrated. A continuous gap was observed from the top edge of the mask for female dummies and from the top and side edges to the nose and mouth area for male dummies. Originality/value The results of this study will be beneficial to mask manufacturers in developing new mask designs with improved fit and in providing accurate instructions on the proper method of wearing masks.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Infection Control and Ventilation · Skin Protection and Aging · Facial Rejuvenation and Surgery Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Human and Social Sciences, Kanazawa University , ,

Yasuda Women's University Faculty of Psychology, , ,

Graduate School of Health and Sports Science, Juntendo University , ,

Graduate School of Fashion and Living Environment Studies, Bunka Gakuen University , ,

Funding

Japan Society for the Promotion of Science

References (63)

Show source-provided references
1. Recommendation regarding the use of cloth face coverings, especially in areas of significant community-based transmission
2. Filtration mechanisms and manufacturing methods of face masks: an overview10.1177/1528083720980169 ↗
3. Understanding the environmental impacts of facemasks: a review on the facemask industry and existing life cycle assessment studies10.1186/s42834-023-00182-x ↗
4. Mask material filtration efficiency and mask fitting at the crossroads: implications during pandemic times10.4209/aaqr.200571 ↗
5. Astm F3502-21 standard specification for barrier face coverings
6. Filtration efficiency, breathability, and reusability of improvised materials for face masks10.1080/02786826.2021.1898537 ↗
7. Observed face mask use at six universities - united States, September-November 202010.15585/mmwr.mm7006e1 ↗
8. Fit testing of respirators with ear loop straps
9. Social and behavioral consequences of mask policies during the Covid-19 pandemic10.1073/pnas.2011674117 ↗
10. Of masks and men? Gender, sex, and protective measures during Covid-1910.1017/s1743923x20000616 ↗
11. Science brief: community use of masks to control the spread of Sars-Cov-2
12. Used disposable face masks are significant sources of microplastics to environment10.1016/j.envpol.2021.117485 ↗
13. Universal masking during Covid-19 outbreaks in aged care settings: a systematic review and meta-analysis10.1016/j.arr.2023.102138 ↗
14. Evaluation of wearing comfort of dust masks10.1371/journal.pone.0237848 ↗
15. Lifting universal masking in schools - covid-19 incidence among students and staff10.1056/nejmoa2211029 ↗
16. Covid-19: mask efficacy is dependent on both fabric and fit10.2217/fmb-2020-0292 ↗
17. Aerosol filtration efficiency of household materials for homemade face masks: influence of material properties, particle size, particle electrical charge, face velocity, and leaks10.1080/02786826.2020.1817846 ↗
18. Cloth face mask fit and function for children part one: design exploration10.1186/s40691-022-00287-8 ↗
19. To mask or not to mask: modeling the potential for face mask use by the general public to curtail the Covid-19 pandemic10.1016/j.idm.2020.04.001 ↗
20. The selection of face mask as A personal protective equipment under the spherical fuzzy environment considering technical and material properties10.1108/IJCST-07-2021-0095 ↗
21. Challenges and adverse effects of wearing face masks in the Covid-19 era10.3390/challe13020067 ↗
22. Who is wearing A mask? Gender-age-and location-related differences during the Covid-19 pandemic10.1371/journal.pone.0240785 ↗
23. A two-step approach to quantitative content analysis: Kh coder tutorial using anne of green gables (part I)
24. How to reproduce the analysis results of the quantitative text analysis tool Kh coder:reproduction and verification using Kh coder, R, and Spss
25. An evidence review of face masks against Covid-1910.1073/pnas.2014564118 ↗
26. Effects of mask wearing duration and relative humidity on thermal perception in the summer outdoor built environment10.1007/s12273-022-0978-9 ↗
27. Japanese Standards Association · 2021
28. Quick laboratory methodology for determining the particle filtration efficiency of face masks/respirators in the wake of Covid-19 pandemic10.1177/1528083720975084 ↗
29. Wear or not to wear A mask? Recommendation inconsistency, government trust and the adoption of protection behaviors in cross-lagged tpb models10.1080/10410236.2020.1871170 ↗
30. Aerosol filtration efficiency of common fabrics used in respiratory cloth masks10.1021/acsnano.0c03252 ↗
31. Kouchi · 2008
32. A framework for effective face-mask contact modeling based on finite element analysis for custom design of A facial mask10.1371/journal.pone.0270092 ↗
33. A method for generation of A sizing system and representative models for A facial mask design10.3390/app122312387 ↗
34. Effects of wearing N95 and surgical facemasks on heart rate, thermal stress and subjective sensations10.1007/s00420-004-0584-4 ↗
35. The effect of ethanol immersion on fit performance and comfort of A fit tested reusable mask10.1177/15280837221123061 ↗
36. Ministry of Health, Labour and Welfare (2023), “Novel Coronavirus (COVID-19)”, available at: https://www.mhlw.go.jp/stf/seisakunitsuite/bunya/0000164708_00079.html (accessed 27 October 2024).
37. Face masks for all and all for face masks in the Covid-19 pandemic: community level production to face the global shortage and shorten the epidemic10.1017/dmp.2021.17 ↗
38. Morishima · 2018 · 324
39. A pilot study of precautions regarding macro air gaps while wearing hygiene masks10.1177/2327857917061046 ↗
40. Necessary conditions of the length and correct way of wearing of A nonmedical mask for younger Japanese women10.1177/00405175221077044 ↗
41. Experiences and problems with hygiene masks reported by Japanese hay fever sufferers10.1108/ijcst-08-2013-0093 ↗
42. Investigating facemask problems associated with wearing comfort and fit10.1108/ijcst-05-2020-0067 ↗
43. Designing better cloth masks: the effect of fabric and attachment-style on discomfort10.1080/15459624.2022.2145013 ↗
44. National Center For Immunization And Respiratory Diseases · 2021
45. Experimental measurement of the size of gaps required to compromise fit of an N95 respirator10.1017/dmp.2022.23 ↗
46. Testing of outward leakage of different types of masks with A breathing manikin head, ultraviolet light and coloured water mist10.1080/17508975.2021.1951153 ↗
47. Toxic mask-ulinity: the link between masculine toughness and affective reactions to mask wearing in the Covid-19 era10.1017/s1743923x20000422 ↗
48. Risks of Covid-19 face masks to wildlife: present and future research needs
49. Materials analysis and image-based modelling of transmissibility and strain behaviour in approved face mask microstructures10.1038/s41598-022-22102-6 ↗
50. Rinearn · 2014
51. The ‘Double Eights Mask Brace’ improves the fit and protection of A basic surgical mask amidst Covid-19 pandemic10.1002/emp2.12335 ↗
52. Face mask and medical waste disposal during the novel Covid-19 pandemic in Asia10.1016/j.cscee.2020.100052 ↗
53. Environmental challenges induced by extensive use of face masks during Covid-19: a review and potential solutions10.1016/j.envc.2021.100039 ↗
54. Perimeter leakage of face masks and its effect on the mask's efficacy10.1063/5.0086320 ↗
55. Evaluating the fit-effectiveness of fabric-based reusable face masks on 3d printed Niosh headforms10.1177/00405175221089287 ↗
56. Effectiveness of different types of mask in aerosol dispersion in Sars-Cov-2 infection10.1016/j.ijid.2021.06.029 ↗
57. The mask fitter, A simple method to improve medical face mask adaptation using A customized 3d-Printed frame during Covid-19: a survey on users' acceptability in clinical dentistry10.3390/app12178921 ↗
58. To wear or not to wear? The influence of regulatory focus and individual cultural orientation on face mask wearing10.1111/joca.12528 ↗
59. Use of medical and non-medical/fabric masks for community outreach activities during the COVID-19 pandemic, based on current WHO guidance
60. Research on design strategy of mask recycling service based on behavior environment10.3390/su15021065 ↗
61. Decision support algorithm for selecting an antivirus mask over Covid-19 pandemic under spherical normal fuzzy environment10.3390/ijerph17103407 ↗
62. Filtration efficiencies of nanoscale aerosol by cloth mask materials used to slow the spread of Sars-Cov-210.1021/acsnano.0c05025 ↗
63. Identifying airborne transmission as the dominant route for the spread of Covid-1910.1073/pnas.2009637117 ↗