Analyzing the effect of the structural parameters of the fabric substrate layer on the textile FSS shielding properties

Purpose In this article, the authors intended to analyze the shielding properties of a fabric frequency selective surface (FSS) structure to the basis of substrate fabric properties. For this purpose, the effect of the properties and structural parameters of the substrate fabric layer were analyzed on the shielding properties of the developed FSS. Design/methodology/approach The experimental and theoretical evaluations were done at the frequency band of 1,805–1,880 MHz and computer simulation technology (CST) was used in modeling. In experiments were developed the FSS structures by different fabrics as the substrate layers and the copper as the patch cells. The shielding properties of these samples were measured experimentally by the developed setup. Findings Confirming resonant frequencies, transmission coefficients, and the bandwidths results obtained from modeling and experiments show that the thickness, weight and interweaving structure parameters were affect the porosity of the substrate fabric. Porosity of the fabric moves the resonant frequency due to the changing of the dielectric properties of the fabric. Therefore, shielding properties of the FSS structure were affected by these parameters as the important characteristics of the substrate fabric. In addition, shielding properties of the samples (resonant frequencies and transmission coefficients) in different incident angles are not same in two modes of transverse electric and transfer magnetic. Originality/value The experimental results suggest that the introduced flexible FSS structures are suitable for shielding applications in the proposed frequency band.