journal article·2021-11

Advanced analysis of flexural test results of sealant for solid oxide cells

Masood Fakouri Hasanabadi, Amir Hossein Kokabi, Mohammad Ali Faghihi‐Sani, Hamid Abdoli, Jürgen Malzbender, Sonja‐Michaela Gross‐Barsnick

Publisher page

Abstract

Abstract The conventional relations for calculating the fracture stresses consider only elastic deformation but ignore viscoelastic and viscoplastic behaviors. Measuring the joining strength of a composite glass sealant‐metallic interconnect specimen at solid oxide cell application relevant at high temperatures is a case where such effects can become significant. In the current study, three‐point and four‐point bending test results were analyzed using the finite element method (FEM) to assess systematic and random errors. It is shown that plastic deformation of the steel interconnect material at high temperature, although having a large effect on the stress distribution in the steel/glass–ceramic/steel specimen, does not cause a significant difference in the FEM‐derived true and the standard equation‐based analytically derived flexural stress values. It is also observed that even if the viscous flow of the glass–ceramic is considered in the simulations, the samples’ behavior in a realistic testing condition is not biased significantly by inelastic behavior due to the short testing time.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advancements in Solid Oxide Fuel Cells · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering Sharif University of Technology Tehran Iran

Renewable Energy Research Department Niroo Research Institute (NRI Tehran Iran)

Forschungszentrum Jülich GmbH Institute of Energy and Climate Research Jülich Germany

Forschungszentrum Jülich GmbH Central Institute of Engineering, Electronics and Analytic Jülich Germany

References (35)

Show source-provided references
1. Brandon NP · 2017
2. Solid oxide fuel cell stack with high electrical efficiency10.53829/ntr200910sf3 ↗
3. Fakouri HM · 2018
4. Behling NH · 2013
5. 10.1007/978-1-4614-1957-0_210.1007/978-1-4614-1957-0_2 ↗
6. 10.1111/ijac.1346110.1111/ijac.13461 ↗
7. 10.1111/ijac.1288910.1111/ijac.12889 ↗
8. 10.1111/ijac.1283410.1111/ijac.12834 ↗
9. 10.1557/JMR.2003.012710.1557/JMR.2003.0127 ↗
10. Abdoli H · 2013
11. 10.1557/jmr.2018.45910.1557/jmr.2018.459 ↗
12. 10.1016/j.ceramint.2020.09.25010.1016/j.ceramint.2020.09.250 ↗
13. 10.1016/j.ijhydene.2017.01.06510.1016/j.ijhydene.2017.01.065 ↗
14. 10.1016/j.ceramint.2017.05.21110.1016/j.ceramint.2017.05.211 ↗
15. 10.1016/j.ceramint.2018.10.13410.1016/j.ceramint.2018.10.134 ↗
16. 10.1016/j.ijhydene.2015.10.02310.1016/j.ijhydene.2015.10.023 ↗
17. 10.1111/ijac.1281910.1111/ijac.12819 ↗
18. 10.1016/j.jpowsour.2013.04.04310.1016/j.jpowsour.2013.04.043 ↗
19. 10.1016/j.jeurceramsoc.2018.01.01610.1016/j.jeurceramsoc.2018.01.016 ↗
20. 10.1016/j.ijhydene.2019.03.21710.1016/j.ijhydene.2019.03.217 ↗
21. 10.1016/j.ceramint.2017.06.12810.1016/j.ceramint.2017.06.128 ↗
22. 10.1016/j.ceramint.2019.10.22110.1016/j.ceramint.2019.10.221 ↗
23. 10.1016/j.ceramint.2018.09.23610.1016/j.ceramint.2018.09.236 ↗
24. Glaslöten ‐ eine anspruchsvolle Fügetechnik nicht nur für die Hochtemperatur‐Brennstoffzelle
25. 10.1111/j.1744-7402.2009.02455.x10.1111/j.1744-7402.2009.02455.x ↗
26. 10.1002/fuce.20110011610.1002/fuce.201100116 ↗
27. Crofer 22 APU Material data sheet No. 4046. ThyssenKrupp VDM Germany May;2010.
28. 10.1520/JTE2017004610.1520/JTE20170046 ↗
29. 2018
30. 10.1016/j.jpowsour.2008.07.01710.1016/j.jpowsour.2008.07.017 ↗
31. Mecholsky JJ · 1983 · 165
32. 10.1007/BF0055609310.1007/BF00556093 ↗
33. 10.1007/BF0073028510.1007/BF00730285 ↗
34. 10.1111/j.1151-2916.1988.tb05886.x10.1111/j.1151-2916.1988.tb05886.x ↗
35. 10.1016/j.jpowsour.2013.08.01010.1016/j.jpowsour.2013.08.010 ↗