Effect of Y 2 O 3 additive on nitridation of diamond wire silicon cutting waste
Source abstract
Abstract
Abstract The effect of Y 2 O 3 additive on the nitridation of diamond wire silicon cutting waste (DWSCW) was studied by using X‐ray diffraction, thermo gravimetry, differential thermal analysis, scanning electron microscope equipped with energy‐dispersive spectrometry, and an equivalent alternative method, and the individual particles of DWSCW were simulated using cubic polycrystalline silicon blocks. The results showed that the native SiO 2 film on the surface of DWSCW can be disrupted at low temperature (1300°C) by adding Y 2 O 3 additive, which provide good channels for the diffusion of SiO and N 2 and improve the overall conversion of DWSCW. Y 2 O 3 additive can also reduce the initial nitriding temperature of cutting waste, change the nitriding kinetic behavior, and promote the formation of β‐Si 3 N 4 through accelerating the nitridation of cutting waste at high temperature (≥1500°C). In addition, when 8 wt% Y 2 O 3 additive is added to the cutting waste, the complete nitridation is achieved, at 1350°C, and ω α + ω β reaches a maximum of 83.6 wt%.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education) Northeastern University Shenyang China
School of Material Science and Engineering Northeastern University Shenyang China
School of Metallurgy Northeastern University Shenyang China
Funding
National Natural Science Foundation of China
References (46)
Show source-provided references
1. Beneficial and technological analysis for the recycling of solar grade silicon wastes
2. Research progress of resource utilization of crystal silicon cutting waste
3. 10.1016/S0927-796X(02)00092-X10.1016/S0927-796X(02)00092-X ↗
4. Recycling high purity silicon from diamond wire saw kerf slurry waste by vacuum refining process
5. 10.1016/j.seppur.2014.06.03710.1016/j.seppur.2014.06.037 ↗
6. Recycling of silicon powder waste cut by a diamond wire saw through laser assisted vacuum smelting
7. Silicon nitride and related materials10.1111/j.1151-2916.2000.tb01182.x ↗
8. The c‐axis texturing of seeded Si3N4 with β‐Si3N4 whiskers by slip casting in a rotating magnetic field
9. 10.1111/j.1151-2916.1979.tb19096.x10.1111/j.1151-2916.1979.tb19096.x ↗
10. 10.1111/j.1551-2916.2008.02845.x10.1111/j.1551-2916.2008.02845.x ↗
11. 10.1111/j.1151-2916.1994.tb06975.x10.1111/j.1151-2916.1994.tb06975.x ↗
12. 10.1016/j.matlet.2016.04.12910.1016/j.matlet.2016.04.129 ↗
13. 10.1007/BF0055196110.1007/BF00551961 ↗
14. 10.1111/j.1151-2916.2001.tb00897.x10.1111/j.1151-2916.2001.tb00897.x ↗
15. Catalytic mechanism of Ni on the nitridation of the diamond‐wire saw powder
16. Study on the mechanism of preparation of high‐quality silicon nitride from diamond wire cutting waste
17. Effect of iron and its oxides on the preparation of silicon nitride from crystalline silicon waste
18. 10.2109/jcersj2.1903610.2109/jcersj2.19036 ↗
19. Nitridation behaviors of silicon powder doped with various rare earth oxides
20. 10.1016/j.jeurceramsoc.2005.07.02710.1016/j.jeurceramsoc.2005.07.027 ↗
21. 10.1007/BF0054044410.1007/BF00540444 ↗
22. 10.1111/ijac.1325410.1111/ijac.13254 ↗
23. Microwave assisted acid leaching for recovery of silicon from diamond wire cutting waste slurry
24. Study on the kinetics of iron removal from silicon diamond wire saw cutting waste: comparison between heterogeneous and homogeneous reaction methods
25. Removal of Fe, B and P impurities by enhanced separation technique from silicon rich powder of the multi‐wire sawing slurry
26. 10.1016/j.ceramint.2016.01.09510.1016/j.ceramint.2016.01.095 ↗
27. 10.1111/j.1551-2916.2011.04914.x10.1111/j.1551-2916.2011.04914.x ↗
28. 10.1007/BF0054169310.1007/BF00541693 ↗
29. Catalytic nitridation preparation of high‐performance Si3N4‐Si‐C composite using Fe2O3 nano‐particle catalyst: experimental and DFT studies
30. Catalytic effects of Cr on nitridation of silicon and formation of one‐dimensional silicon nitride nanostructure
31. 10.1007/BF0054872710.1007/BF00548727 ↗
32. 10.1016/S0167-577X(02)00690-010.1016/S0167-577X(02)00690-0 ↗
33. 10.1111/j.1551-2916.2005.00421.x10.1111/j.1551-2916.2005.00421.x ↗
34. 10.1111/ijac.1320710.1111/ijac.13207 ↗
35. 10.1007/s12613-013-0756-x10.1007/s12613-013-0756-x ↗
36. 10.1016/j.ceramint.2014.03.12210.1016/j.ceramint.2014.03.122 ↗
37. 10.1103/PhysRevB.67.24510810.1103/PhysRevB.67.245108 ↗
38. 10.1557/jmr.2006.017310.1557/jmr.2006.0173 ↗
39. 10.1016/j.ceramint.2017.10.05810.1016/j.ceramint.2017.10.058 ↗
40. 10.1016/j.ceramint.2019.07.21310.1016/j.ceramint.2019.07.213 ↗
41. Catalytic preparation of Si3N4 bonded SiC refractories and their high temperature properties
42. 10.4028/www.scientific.net/AMR.833.22110.4028/www.scientific.net/AMR.833.221 ↗
43. 10.1016/j.ijrmhm.2014.05.00110.1016/j.ijrmhm.2014.05.001 ↗
44. 10.1016/S0272-8842(01)00122-510.1016/S0272-8842(01)00122-5 ↗
45. 10.1111/j.1744-7402.2011.02627.x10.1111/j.1744-7402.2011.02627.x ↗
46. 10.1111/j.1151-2916.1991.tb04093.x10.1111/j.1151-2916.1991.tb04093.x ↗