Improving fracture toughness and densification behavior of single‐phase TaC–HfC ceramic with carbon additives
Source abstract
Abstract
Abstract This investigation was undertaken to determine the role of carbon additives on the densification behavior and fracture toughness of TaC–HfC ceramic. The composition of TaC‐19 vol% HfC‐5 vol% VC with 10 vol% nano graphite/10 vol% nano carbon black was sintered by hot‐pressing (HP) method. Also, the sintering temperature varied from 1700°C to 2000°C. Vanadium carbide was used as a sintering aid to minimize the porosity for the given hot‐pressing temperatures while keeping the consolidation temperature low. The analysis of XRD patterns revealed that the sintering process led to the formation of a ternary solid solution in the samples accompanied by the entire consumption of HfC and VC phases. Also, the presence of carbon additives increased the relative density from 96% to 100% by enhancing the sintering temperature from 1700°C to 2000°C. It was significantly higher than the carbon‐free sample, which had a maximum value of 96.7% at 2000°C. The results also indicated that the maximum fracture toughness of 7.1 MPa.m 1/2 was obtained for nano carbon black contained samples at the sintering temperature of 1900°C and above. The toughening mechanisms in samples were discussed, too.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering, Faculty of Mechanical Engineering University of Tabriz Tabriz Iran
Department of Materials Science and Engineering, Faculty of Engineering Urmia University Urmia Iran
Department of Materials Science and Engineering Ahvaz Branch, Islamic Azad University Ahvaz Iran
References (31)
Show source-provided references
1. 10.1007/0-387-23986-3_910.1007/0-387-23986-3_9 ↗
2. 10.53063/synsint.2022.247510.53063/synsint.2022.2475 ↗
3. Gusev AI · 2013
4. 10.1016/j.jeurceramsoc.2018.11.03010.1016/j.jeurceramsoc.2018.11.030 ↗
5. 10.1016/j.ijrmhm.2013.04.01810.1016/j.ijrmhm.2013.04.018 ↗
6. 10.1016/j.ceramint.2017.08.10310.1016/j.ceramint.2017.08.103 ↗
7. 10.1016/j.jeurceramsoc.2011.07.00310.1016/j.jeurceramsoc.2011.07.003 ↗
8. 10.1016/j.ijrmhm.2015.11.01110.1016/j.ijrmhm.2015.11.011 ↗
9. 10.1016/j.jeurceramsoc.2013.01.01710.1016/j.jeurceramsoc.2013.01.017 ↗
10. 10.1016/j.ceramint.2012.08.05010.1016/j.ceramint.2012.08.050 ↗
11. 10.4028/www.scientific.net/JNanoR.21.14510.4028/www.scientific.net/JNanoR.21.145 ↗
12. 10.1080/17436753.2021.189236310.1080/17436753.2021.1892363 ↗
13. The effect of vanadium carbide on densification of TaC‐ nano graphite composite
14. 10.1016/j.mtcomm.2020.10175610.1016/j.mtcomm.2020.101756 ↗
15. 10.1016/j.jallcom.2009.04.10910.1016/j.jallcom.2009.04.109 ↗
16. 10.1088/2053‐1591/ab078210.1088/2053‐1591/ab0782 ↗
17. 10.1016/j.ceramint.2018.01.21410.1016/j.ceramint.2018.01.214 ↗
18. 10.30501/acp.2016.7001310.30501/acp.2016.70013 ↗
19. 10.1038/s41598‐017‐15365‐x10.1038/s41598‐017‐15365‐x ↗
20. 10.1111/ijac.1436810.1111/ijac.14368 ↗
21. 10.1016/j.jeurceramsoc.2018.08.04810.1016/j.jeurceramsoc.2018.08.048 ↗
22. 10.1111/j.1151‐2916.1981.tb10320.x10.1111/j.1151‐2916.1981.tb10320.x ↗
23. 10.1007/s42823‐023‐00523‐110.1007/s42823‐023‐00523‐1 ↗
24. 10.1111/j.1551‐2916.2006.01416.x10.1111/j.1551‐2916.2006.01416.x ↗
25. 10.1007/s12633‐023‐02553‐w10.1007/s12633‐023‐02553‐w ↗
26. 10.1007/BF0264837310.1007/BF02648373 ↗
27. 10.1111/jace.1477810.1111/jace.14778 ↗
28. 10.1016/j.jallcom.2023.17168910.1016/j.jallcom.2023.171689 ↗
29. 10.1007/s42823-022-00389-910.1007/s42823-022-00389-9 ↗
30. 10.1016/j.diamond.2022.10924410.1016/j.diamond.2022.109244 ↗
31. 10.1016/j.jeurceramsoc.2017.10.02510.1016/j.jeurceramsoc.2017.10.025 ↗