journal article·2025-01Open access

Investigating effects of sintering mean residence time on engineering properties of coal ash‐based lightweight aggregate

Yousif Alqenai, Mo Balapour, Mohammadamin Zooyousefin, Nishant Shresthal, Y. Grace Hsuan, Yaghoob (Amir) Farnam

Abstract

Abstract This study examines the effect of sintering mean residence time (MRT) on the engineering properties and morphological structure of lightweight aggregates (LWA) manufactured from waste coal combustion ash (W‐CCA). A thermodynamics‐based framework was used to tune LWA manufacturing processes. A minimum 35% liquid phase (by mass) and a lower bound viscosity of 100 Pa·s of molten material were found necessary to successfully produce LWA. Using W‐CCA's chemical composition and FactSage thermodynamic modeling, the sintering temperature for LWA was set to 1075°C. Green spherical pellets made using a pelletizer were sintered at MRT of 5.1, 14.8, and 25.9 min to test LWA physical‐mechanical properties including, unit weight, specific gravity, water absorption, and compressive strength. Results indicated that unit weight ranged from 752 to 800 kg/m 3 , providing desirable lightweight properties. Oven dry specific gravity ranged from 1.24 to 1.43, complying with ENI13055 specification for LWA. Water absorption capacity decreased as MRT extended from 5.1 to 14.8 min and then increased as MRT proceeded from 14.8 to 25.9 min, achieving an average absorption capacity of 26% ± 1.5%. The inverse effect was noticed for compressive strength as LWA sintered with an MRT of 14.8 min demonstrated the highest compressive strength of 14.7 ± 1.8 MPa. The initial decrease in water absorption and increase in compressive strength are attributed to the efficient sintering of the LWA's internal structure. The inverse effect observed as MRT proceeded from 14.8 to 25.9 min was believed to be a result of thermal cracking due to extensive heat exposure. MRT of 14.8 min is recommended for LWA production using the coal ash utilized in this study for its buoyancy characteristics, sufficient absorption capability, and higher compressive strength.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Advanced ceramic materials synthesis · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil, Architectural and Environmental Engineering Drexel University Philadelphia Pennsylvania USA

SusMaX Inc. Philadelphia Pennsylvania USA

Funding

National Science Foundation

References (60)

Show source-provided references
1. 10.1016/j.jhazmat.2006.09.09410.1016/j.jhazmat.2006.09.094 ↗
2. 10.4028/www.scientific.net/amm.754‐755.27910.4028/www.scientific.net/amm.754‐755.279 ↗
3. 10.1016/j.jclepro.2015.07.00110.1016/j.jclepro.2015.07.001 ↗
4. 10.1016/j.resconrec.2004.12.00610.1016/j.resconrec.2004.12.006 ↗
5. 10.1016/j.wasman.2020.08.02510.1016/j.wasman.2020.08.025 ↗
6. 10.1088/1742-6596/901/1/01208610.1088/1742-6596/901/1/012086 ↗
7. AinetoM AcostaA RincónJM RomeroM.Production of lightweight aggregates from coal gasification fly ash and slag. Paper presented at: World of Coal Ash (WOCA) April 11–15 2005; Lexington Kentucky USA.
8. Engineering properties of fly ash‐based lightweight aggregate
9. 10.1016/j.cemconcomp.2019.10342810.1016/j.cemconcomp.2019.103428 ↗
10. 10.1016/j.conbuildmat.2022.12801310.1016/j.conbuildmat.2022.128013 ↗
11. 10.1016/j.conbuildmat.2013.05.03910.1016/j.conbuildmat.2013.05.039 ↗
12. 10.1016/0262-5075(86)90040-010.1016/0262-5075(86)90040-0 ↗
13. 10.1016/j.jclepro.2019.11804110.1016/j.jclepro.2019.118041 ↗
14. 10.1021/ie203023k10.1021/ie203023k ↗
15. 10.1016/j.resconrec.2009.12.00610.1016/j.resconrec.2009.12.006 ↗
16. 10.1016/j.conbuildmat.2020.11816810.1016/j.conbuildmat.2020.118168 ↗
17. 10.1016/S0008-8846(01)00663-910.1016/S0008-8846(01)00663-9 ↗
18. 10.1061/jmcee7.mteng‐1704810.1061/jmcee7.mteng‐17048 ↗
19. 10.1016/j.jobe.2022.10544710.1016/j.jobe.2022.105447 ↗
20. 10.1016/j.conbuildmat.2021.12273710.1016/j.conbuildmat.2021.122737 ↗
21. FactSage representatives around the world.FactSage;2024.
22. 10.1016/j.resconrec.2021.10605010.1016/j.resconrec.2021.106050 ↗
23. 10.1021/ef020165o10.1021/ef020165o ↗
24. 10.1002/srin.19870151310.1002/srin.198701513 ↗
25. KalmanovitchDP.An effective model of viscosity for ash deposition phenomena. Paper presented at:Proc. Eng. Found. Conf. Miner. Matter Ash Depos. from Coal.1988;89–101.https://cir.nii.ac.jp/crid/1570854175722646272
26. 10.1122/1.54884810.1122/1.548848 ↗
27. 10.1111/jace.1745810.1111/jace.17458 ↗
28. 10.1080/0278682050048439610.1080/02786820500484396 ↗
29. 10.1016/j.cemconres.2016.08.00410.1016/j.cemconres.2016.08.004 ↗
30. 10.1155/2019/264739110.1155/2019/2647391 ↗
31. 10.1016/0008‐8846(95)00116‐T10.1016/0008‐8846(95)00116‐T ↗
32. Scrivener K · 2016
33. 10.1016/j.cemconres.2006.03.02210.1016/j.cemconres.2006.03.022 ↗
34. 10.1021/cr990034t10.1021/cr990034t ↗
35. 10.1007/s10973‐006‐7712‐110.1007/s10973‐006‐7712‐1 ↗
36. 10.1080/10962247.2019.167475310.1080/10962247.2019.1674753 ↗
37. 10.1016/0016-2361(94)90110-410.1016/0016-2361(94)90110-4 ↗
38. 10.3390/ma1519666910.3390/ma15196669 ↗
39. 10.1016/j.conbuildmat.2023.13113410.1016/j.conbuildmat.2023.131134 ↗
40. Boateng AA · 2013
41. 10.1016/j.powtec.2019.06.00810.1016/j.powtec.2019.06.008 ↗
42. 10.1007/BF0265435610.1007/BF02654356 ↗
43. 10.1021/acs.energyfuels.9b0384210.1021/acs.energyfuels.9b03842 ↗
44. SullivanJD MaierCG RalstonOC Passage of Solid Particles Through Rotary Cylindrical Kilns report Washington D.C. University of North Texas Libraries UNT Digital Library crediting UNT Libraries Government Documents Department.1927;https://digital.library.unt.edu/ark:/67531/metadc66410accessed July 14 2024
45. 10.1016/j.powtec.2018.04.00210.1016/j.powtec.2018.04.002 ↗
46. 10.1007/BF0265435810.1007/BF02654358 ↗
47. 10.1007/BF0265435710.1007/BF02654357 ↗
48. 10.1016/j.applthermaleng.2022.11963710.1016/j.applthermaleng.2022.119637 ↗
49. 10.1016/j.ces.2006.03.05410.1016/j.ces.2006.03.054 ↗
50. 10.1016/j.ijsrc.2016.09.00110.1016/j.ijsrc.2016.09.001 ↗
51. 10.1016/j.powtec.2018.02.00310.1016/j.powtec.2018.02.003 ↗
52. 10.1016/j.powtec.2005.04.04010.1016/j.powtec.2005.04.040 ↗
53. 10.1016/j.cep.2004.02.02510.1016/j.cep.2004.02.025 ↗
54. ASTM:C29/C29M‐09. Standard test method for bulk density (“ unit weight ”) and voids in aggregate.ASTM International;2009:1–5.https://doi.org/10.1520/C0029
55. ASTM C128. Standard test method for relative density (specific gravity) and absorption of fine aggregate.ASTM International;2023.https://doi.org/10.1520/C0128‐1510.1520/C0128 ↗
56. ASTM C127. Standard test method for density relative density (specific gravity) and absorption of coarse aggregate.ASTM International;2004:1–5.https://doi.org/10.1520/C0127‐15.210.1520/C0127 ↗
57. BSI Standards Publication Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates.ACCURIS Store.www.techstreet.comaccessed July 31 2013
58. Dragonfly 2021.3 release notes.ORS Systems;2021.
59. 10.1016/j.conbuildmat.2019.02.13410.1016/j.conbuildmat.2019.02.134 ↗
60. European Standard EN13055‐1.ITEH Standards;2016;1:2–5.https://standards.iteh.ai/catalog/standards/sist/7fa25894‐8ba1‐41419ae70fce18b2a2e/sist‐en‐13055‐2016accessed March 18 2016