Evaluation of dynamic modulus measurement for C/C‐SiC composites at different temperatures
Source abstract
Abstract
Abstract The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C‐SiC composites at the application temperature. At room temperature flexural moduli of C/C‐SiC with 0/90° reinforcement were measured under quasi‐static 4‐point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C‐SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi‐static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C‐SiC and may be transferred to other fibre reinforced ceramic composite materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Fire effects on concrete materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
German Aerospace Center (DLR): Institute of Structures and Design (BT) Stuttgart Germany
Krebs & Riedel Schleifscheibenfabrik GmbH & Co. KG Bad Karlshafen Germany
RWTH Aachen University, Institute of Mineral Engineering Aachen Germany
European Patent Office (EPO) The Hague Netherland
References (26)
Show source-provided references
1. 10.1016/j.commatsci.2013.04.00710.1016/j.commatsci.2013.04.007 ↗
2. 10.1111/j.1151-2916.1998.tb02497.x10.1111/j.1151-2916.1998.tb02497.x ↗
3. 10.1063/1.114986710.1063/1.1149867 ↗
4. OtaniLB PereiraAHA MeloJDD AmicoSC.Elastic moduli characterization of composites using the impulse excitation. White paper: Technical‐scientific Informative ATCP Physical Engineering;2014.
5. A simple method for evaluating elastic modulus of refractories at high temperatures
6. 10.1063/1.114842210.1063/1.1148422 ↗
7. 10.1016/S0167-577X(03)00282-910.1016/S0167-577X(03)00282-9 ↗
8. 10.1002/9783527622412.ch510.1002/9783527622412.ch5 ↗
9. Krenkel W · 2000
10. Breede F · 2017
11. 10.1111/ijac.1249610.1111/ijac.12496 ↗
12. HeidenreichB ZuberC ToroS NardiM.C/C‐SiC friction pads for an aircraft propeller brake. In:(DGM) DGfMeV editor. DGM 19 Symposium Verbundwerkstoffe und Werkstoffverbunde; 03.‐05.07.2013Karlsuhe Germany;2013.
13. OrteltM ElsässerH HerbertzA MüllerI HaldH editors.Structural investigations on cryogenically operated and transpiration cooled fiber reinforced rocket thrust chambers. 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit;2012.10.2514/6.2012-4010 ↗
14. 10.1007/s12567-014-0062-010.1007/s12567-014-0062-0 ↗
15. WeihsH LongoJ TurnerJ editors.The sharp edge flight experiment SHEFEX II a mission overview and status. 15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference.Dayton Ohio;2008.10.2514/6.2008-2542 ↗
16. Maier H-P · 2001 · 177
17. Hofmann S · 2014
18. Maile K · 2000 · 43
19. 10.1115/1.280595610.1115/1.2805956 ↗
20. 10.1177/07316844930120070810.1177/073168449301200708 ↗
21. 10.1023/A:101869970247010.1023/A:1018699702470 ↗
22. 10.1007/978-94-011-3388-3_2610.1007/978-94-011-3388-3_26 ↗
23. TraonN TonnesenT TelleR PereiraA RodriguesJ editors.Comparison of the elastic properties determined by different devices in a refractory castable based on partially stabilzed zirconia. 53rd International Colloquium on Refractories Aachen;2010.
24. 10.5772/1831310.5772/18313 ↗
25. 10.1016/j.carbon.2008.07.03510.1016/j.carbon.2008.07.035 ↗
26. Corporation A. Silicon Carbide Material Properties[document on the Internet] Phillipsburg NJ USA: Accuratus Corporation; 2013 [updated 2013; cited 2019 june]. Available from:http://accuratus.com/silicar.html.