Effect of WC particle size on the microstructure and mechanical properties of Ni–Co coarse grain cemented carbide

Abstract The effect of different WC grain size additions on the microstructure and grain distribution of Ni–Co coarse crystalline cemented carbide was studied. And then the effect of grain distribution on the mechanical properties of cemented carbide was discussed. The effect of WC grain size on the grain size and coherency of cemented carbide was analyzed by microstructure. And the distribution of grains in the microstructure was investigated by the truncation method. The addition of fine (1.1–1.4 μm), medium (2.3–2.7 μm), and coarse WC (5.6–6.0 μm) particles can increase the nucleation rate of WC grains in the bonded phase. And the higher grain growth driving force can produce the theoretical limitation of nucleation and inhibit the coarsening of WC grains to a certain extent. The WC grain size has an insignificant effect on the frequency of the occurrence of super‐coarse grains in coarse crystalline cemented carbide. The average grain size and super coarse grains in microstructure gradually decrease, which promotes the improvement of transverse rupture strength. The increase of the adjacent degree and the decrease of the mean free path reduce which is beneficial to the improvement of the corrosion resistance of the alloy. The best overall performance of the alloy is achieved when fine‐grained WC is added.