Formation of Ti 3 SiC 2 interphase coating on SiC f /SiC composite by electrophoretic deposition
Source abstract
Abstract
Abstract To improve the oxidation resistance of SiC composites at high temperature, the feasibility of using Ti 3 SiC 2 coated via electrophoretic deposition (EPD) as a SiC fiber reinforced SiC composite interphase material was studied. Through fiber pullout, Ti 3 SiC 2 , due to its lamellar structure, has the possibility of improving the fracture toughness of SiC f /SiC composites. In this study, Ti 3 SiC 2 coating was produced by EPD on SiC fiber; using Ti 3 SiC 2 ‐coated SiC fabric, SiC f /SiC composite was fabricated by hot pressing. Platelet Ti 3 SiC 2 powder pulverized into nanoparticles through high‐energy wet ball milling was uniformly coated on the SiC fiber in a direction in which the basal plane of the particles was parallel to the fiber. In a 3‐point bending test of the SiC f /SiC composite using Ti 3 SiC 2 ‐coated SiC fabric, the SiC f /SiC composite exhibited brittle fracture behavior, but an abrupt slope change in the strength‐displacement curve was observed during loading due to the Ti 3 SiC 2 interphase. On the fracture surface, delamination between each layer of SiC fabric was observed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Nuclear Materials Development Division Korea Atomic Energy Research Institute Yuseong‐gu Daejeon Korea
Funding
Ministry of Science ICT and Future Planning · National Research Foundation of Korea
References (32)
Show source-provided references
1. 10.1126/science.285.5428.69910.1126/science.285.5428.699 ↗
2. 10.1016/S0266-3538(03)00230-610.1016/S0266-3538(03)00230-6 ↗
3. 10.1016/j.jnucmat.2004.04.00210.1016/j.jnucmat.2004.04.002 ↗
4. Role of the fiber‐matrix interface in ceramic composites
5. 10.1016/S1359-835X(97)00128-010.1016/S1359-835X(97)00128-0 ↗
6. Fibre‐matrix interphases and interfaces in ceramic matrix composites processed by CVI10.1163/156855493X00112 ↗
7. 10.1016/j.jeurceramsoc.2006.10.01010.1016/j.jeurceramsoc.2006.10.010 ↗
8. 10.1111/j.1744-7402.2009.02424.x10.1111/j.1744-7402.2009.02424.x ↗
9. 10.1016/j.jnucmat.2010.12.25310.1016/j.jnucmat.2010.12.253 ↗
10. 10.1111/j.1151-2916.1996.tb08018.x10.1111/j.1151-2916.1996.tb08018.x ↗
11. 10.1511/2001.28.73610.1511/2001.28.736 ↗
12. 10.1016/S1359-6462(03)00214-810.1016/S1359-6462(03)00214-8 ↗
13. 10.1016/j.tsf.2004.09.04310.1016/j.tsf.2004.09.043 ↗
14. 10.1002/1521-3862(200011)6:6<289::AID-CVDE289>3.0.CO;2-410.1002/1521-3862(200011)6:6<289::AID-CVDE289>3.0.CO;2-4 ↗
15. 10.1007/BF0035595210.1007/BF00355952 ↗
16. 10.1016/j.surfcoat.2006.09.04010.1016/j.surfcoat.2006.09.040 ↗
17. 10.1016/j.jeurceramsoc.2010.11.02110.1016/j.jeurceramsoc.2010.11.021 ↗
18. 10.1016/j.jeurceramsoc.2008.04.00410.1016/j.jeurceramsoc.2008.04.004 ↗
19. 10.1016/j.compscitech.2012.07.00410.1016/j.compscitech.2012.07.004 ↗
20. 10.1016/j.mseb.2008.11.03210.1016/j.mseb.2008.11.032 ↗
21. 10.1016/j.jnucmat.2008.12.31410.1016/j.jnucmat.2008.12.314 ↗
22. 10.1016/j.matlet.2015.01.12810.1016/j.matlet.2015.01.128 ↗
23. 10.1111/j.1551-2916.2012.05296.x10.1111/j.1551-2916.2012.05296.x ↗
24. 10.4191/kcers.2011.48.5.33510.4191/kcers.2011.48.5.335 ↗
25. 10.1016/j.jeurceramsoc.2005.03.24010.1016/j.jeurceramsoc.2005.03.240 ↗
26. 10.1023/B:JMSC.0000012906.70457.df10.1023/B:JMSC.0000012906.70457.df ↗
27. 10.4191/kcers.2016.53.1.8710.4191/kcers.2016.53.1.87 ↗
28. 10.1016/j.pmatsci.2006.07.00110.1016/j.pmatsci.2006.07.001 ↗
29. 10.1016/S0081-1947(08)60640-210.1016/S0081-1947(08)60640-2 ↗
30. 10.1111/ijac.1225610.1111/ijac.12256 ↗
31. 10.1016/j.jeurceramsoc.2014.09.01110.1016/j.jeurceramsoc.2014.09.011 ↗
32. 10.1016/j.jnucmat.2013.04.07410.1016/j.jnucmat.2013.04.074 ↗