Fabrication of tubular solid oxide fuel cells by solvent‐assisted lamination and co‐firing a rolled multilayer tape cast
Source abstract
Abstract
Abstract This study presents preliminary results for tubular anode‐supported solid oxide fuel cells ( SOFC s) fabricated by a novel method based on tape casting. A multilayer tape cast was prepared by successive casting of the anode support, anode functional layer, and electrolyte. The tape cast was rolled into a tube, and the ends of the tape were joined by solvent‐assisted lamination. The sample was co‐fired at 1400°C, followed by screen printing and sintering of the cathode at 1150°C. The electrochemical performance of the tubular cell was evaluated in N 2 /H 2 gas at 750°C. The cell generated a maximum power density of 90 mW /cm 2 . The scanning electron microscope ( SEM ) micrographs after the electrochemical tests confirmed that the solvent‐assisted lamination resulted in stable joining without delamination. Although the process and performance have yet to be optimized, the use of multilayer tape casting, solvent‐assisted lamination, and co‐firing is expected to make this method advantageous for low‐cost mass production of tubular SOFC s.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Aeronautics and Engineering (CAE) Kent State University Kent Ohio
References (36)
Show source-provided references
1. 10.1111/j.1744-7402.2004.tb00149.x10.1111/j.1744-7402.2004.tb00149.x ↗
2. 10.1111/j.1744-7402.2007.02127.x10.1111/j.1744-7402.2007.02127.x ↗
3. 10.1016/j.jpowsour.2005.01.07910.1016/j.jpowsour.2005.01.079 ↗
4. 10.1016/j.mser.2009.12.00210.1016/j.mser.2009.12.002 ↗
5. 10.1149/1.152526810.1149/1.1525268 ↗
6. 10.1149/1.295359010.1149/1.2953590 ↗
7. DuY FinnertyC.Tubular electrochemical cell. U.S. Patent No. 8 182 959 2012.
8. 10.1016/j.ijhydene.2011.04.20710.1016/j.ijhydene.2011.04.207 ↗
9. 10.1115/1.311905810.1115/1.3119058 ↗
10. 10.1149/07801.1885ecst10.1149/07801.1885ecst ↗
11. 10.1007/s10008-014-2429-810.1007/s10008-014-2429-8 ↗
12. 10.1016/j.jpowsour.2004.07.01310.1016/j.jpowsour.2004.07.013 ↗
13. 10.1016/j.jpowsour.2004.05.02810.1016/j.jpowsour.2004.05.028 ↗
14. MistlerRE TwinameER.Tape casting: theory and practice American ceramic society 2000.
15. 10.1016/j.ssi.2014.09.01410.1016/j.ssi.2014.09.014 ↗
16. 10.1016/j.cattod.2015.12.02610.1016/j.cattod.2015.12.026 ↗
17. 10.1016/j.jallcom.2006.07.11010.1016/j.jallcom.2006.07.110 ↗
18. 10.1016/j.jpowsour.2009.02.00810.1016/j.jpowsour.2009.02.008 ↗
19. 10.1016/j.jpowsour.2013.11.02610.1016/j.jpowsour.2013.11.026 ↗
20. 10.1016/j.rser.2017.03.09510.1016/j.rser.2017.03.095 ↗
21. 10.1149/1.176813110.1149/1.1768131 ↗
22. 10.1115/1.271377010.1115/1.2713770 ↗
23. 10.1016/j.jeurceramsoc.2011.12.03310.1016/j.jeurceramsoc.2011.12.033 ↗
24. 10.1016/S0955-2219(01)00158-310.1016/S0955-2219(01)00158-3 ↗
25. 10.1016/j.sna.2015.05.02310.1016/j.sna.2015.05.023 ↗
26. 10.1007/s00542-009-0989-910.1007/s00542-009-0989-9 ↗
27. 10.1111/j.1151-2916.2001.tb00652.x10.1111/j.1151-2916.2001.tb00652.x ↗
28. 10.1016/j.jeurceramsoc.2008.07.03510.1016/j.jeurceramsoc.2008.07.035 ↗
29. 10.1111/j.1744-7402.2009.02391.x10.1111/j.1744-7402.2009.02391.x ↗
30. 10.1111/j.1744-7402.2009.02363.x10.1111/j.1744-7402.2009.02363.x ↗
31. 10.1016/S0925-8388(03)00640-610.1016/S0925-8388(03)00640-6 ↗
32. 10.1016/j.jpowsour.2009.03.01910.1016/j.jpowsour.2009.03.019 ↗
33. 10.1016/j.jpowsour.2005.06.03510.1016/j.jpowsour.2005.06.035 ↗
34. 10.1007/s10853-008-2966-610.1007/s10853-008-2966-6 ↗
35. 10.1016/j.ceramint.2017.05.00310.1016/j.ceramint.2017.05.003 ↗
36. 10.1021/es051652w10.1021/es051652w ↗