journal article·2025-09

Evaluation of thermal shock resistance of alumina‒silica refractories based on Buckingham Π theorem

Huiqing Qin, Jay J. Tu, Wenjie Yuan

Publisher page

Abstract

Abstract Thermal shock resistance represents a pivotal service property of refractories, with a correlation to a multitude of physical performance parameters. In this study, thermal conductivity, thermal expansion coefficient, elastic modulus, and other parameters of alumina‒silica refractories were tested, and the thermal shock resistance of alumina‒silica refractories was evaluated using the values of the dimensionless parameters Π and R Π calculated based on the Buckingham Π theorem of dimensional analysis. The results demonstrate that the order of magnitude of R Π values of clay and high‐alumina bricks with alumina contents of 45%–65% is consistent with residual strength ratios. Due to higher proportion of glass phase and quartz, the lower work of fracture for clay bricks (38% alumina content) resulted in a relatively high value of the dimensionless parameter R Π . Nevertheless, the trajectory of R Π value remains aligned with its resistance to thermal shocks of other samples. The interrelationships among multiple physical parameters and their contributions to thermal shock resistance were revealed by the dimensional analysis, which lays a theoretical foundation for the expedited assessment of thermal shock resistance and the design of high‐performance refractories.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced Surface Polishing Techniques · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Advanced Refractories Wuhan University of Science and Technology Wuhan China

HTMS LLC Cleveland Ohio USA

National‐Provincial Joint Engineering Research Center of High Temperature Materials and Lining Technology Wuhan University of Science and Technology Wuhan China

Joint International Research Laboratory of Refractories and Metallurgy Wuhan University of Science and Technology Wuhan China

References (35)

Show source-provided references
1. 10.1007/s11148-022-00632-w10.1007/s11148-022-00632-w ↗
2. 10.3390/ma1623726010.3390/ma16237260 ↗
3. 10.1016/j.ceramint.2024.01.41110.1016/j.ceramint.2024.01.411 ↗
4. 10.1007/s11148-013-9598-310.1007/s11148-013-9598-3 ↗
5. 10.1016/j.conbuildmat.2024.13621910.1016/j.conbuildmat.2024.136219 ↗
6. 10.1111/jace.1982910.1111/jace.19829 ↗
7. 10.1016/j.ceramint.2020.03.01510.1016/j.ceramint.2020.03.015 ↗
8. 10.1016/j.tafmec.2020.10269610.1016/j.tafmec.2020.102696 ↗
9. 10.1016/j.engfracmech.2021.10774010.1016/j.engfracmech.2021.107740 ↗
10. Progress of investigation on thermal shock resistance of ceramic materials
11. 10.1016/j.ceramint.2018.06.27610.1016/j.ceramint.2018.06.276 ↗
12. 10.1016/j.tafmec.2016.08.00610.1016/j.tafmec.2016.08.006 ↗
13. 10.1016/j.ceramint.2012.03.04610.1016/j.ceramint.2012.03.046 ↗
14. 10.1016/j.ceramint.2024.08.03810.1016/j.ceramint.2024.08.038 ↗
15. 10.1073/pnas.040293110110.1073/pnas.0402931101 ↗
16. 10.1016/j.ymssp.2024.11129910.1016/j.ymssp.2024.111299 ↗
17. Bowers B · 2009 · 86
18. 10.3233/JAE-23013310.3233/JAE-230133 ↗
19. 10.1016/j.matpr.2022.05.50810.1016/j.matpr.2022.05.508 ↗
20. 10.1016/j.energy.2024.13082210.1016/j.energy.2024.130822 ↗
21. 10.1007/978-3-642-76673-210.1007/978-3-642-76673-2 ↗
22. 10.1119/1.198706910.1119/1.1987069 ↗
23. TuJJ.Derivation of thermal stress resistance parameters through dimensional analysis. 56th Annual Symposium on Refractories.2021.
24. The measurement of glass phase content in mullite
25. 10.1111/ijac.1445510.1111/ijac.14455 ↗
26. Flexibilizing mechanisms of spinel‐, hercynite‐, galaxite‐, and chromite‐containing basic refractories for cement rotary kilns
27. 10.1111/jace.1914810.1111/jace.19148 ↗
28. 10.1016/j.ceramint.2022.06.25110.1016/j.ceramint.2022.06.251 ↗
29. 10.1016/j.clay.2019.10512610.1016/j.clay.2019.105126 ↗
30. 10.1016/j.materresbull.2004.04.02410.1016/j.materresbull.2004.04.024 ↗
31. SedmaleGM SedmalisUJ ŠperbergaI.Phase composition and properties of mullite ceramic in high‐temperature testing.The 9th International Conference Modern Building Materials Structures and Techniques.2007.
32. Static layer melt crystallization: effects of impurities on the growth behaviors of crystal layers
33. 10.3390/ma1411305010.3390/ma14113050 ↗
34. 10.1016/j.ceramint.2024.09.41110.1016/j.ceramint.2024.09.411 ↗
35. 10.2298/PAC2201001T10.2298/PAC2201001T ↗