Reinforcement of polymethyl methacrylate denture base resin with ZnO nanostructures
Source abstract
Abstract
Abstract Polymethyl methacrylate‐zinc oxide ( PMMA /ZnO) nanocomposites with different ZnO morphology and quantities were prepared by in situ curing of MMA / PMMA used in denture base material in the presence of ZnO nanostructured materials. The composition, structure, and morphology of the nanocomposites were characterized by Fourier‐Transform infrared spectra ( FT ‐ IR ), X‐ray diffraction ( XRD ), transmission electron microscopy ( TEM ), scanning electron microscopy ( SEM ), and thermogravimetric analysis ( TGA ). The effect of ZnO morphology and contents on the mechanical properties including impact, flexural, and hardness was studied. The results demonstrated that the mechanical and thermal properties of denture base materials were improved by incorporation of nano‐sized ZnO into the polymethyl methacrylate matrix. The impact strength was highly improved upon using ZnO nanotubes. However, the flexural strength was improved using ZnO nanospheres.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Silicone and Siloxane Chemistry · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry Faculty of Science Tanta University Tanta Egypt
Department of Chemistry Faculty of Science Nanotechnology Center Kafrelsheikh University Kafr El Sheikh Egypt
References (56)
Show source-provided references
1. 10.1016/j.jpor.2011.06.00210.1016/j.jpor.2011.06.002 ↗
2. 10.1016/S0022-3913(09)60032-910.1016/S0022-3913(09)60032-9 ↗
3. 10.1067/mpr.2001.11856410.1067/mpr.2001.118564 ↗
4. The fracture toughness of denture base material reinforced with different concentrations of POSS10.1081/MA-120039176 ↗
5. 10.1016/j.sjdr.2014.03.00210.1016/j.sjdr.2014.03.002 ↗
6. 10.1016/S0300-5712(97)00034-110.1016/S0300-5712(97)00034-1 ↗
7. 10.1016/S0109-5641(99)00097-410.1016/S0109-5641(99)00097-4 ↗
8. 10.1177/095400831141702310.1177/0954008311417023 ↗
9. 10.1016/j.jds.2012.05.00810.1016/j.jds.2012.05.008 ↗
10. 10.1016/j.dental.2013.09.01310.1016/j.dental.2013.09.013 ↗
11. 10.1016/j.matdes.2008.10.00910.1016/j.matdes.2008.10.009 ↗
12. 10.1016/S0032-3861(01)00253-110.1016/S0032-3861(01)00253-1 ↗
13. 10.1002/pc.2052010.1002/pc.20520 ↗
14. Effect of glass fiber and silane treated glass fiber reinforcement on impact strength of maxillary complete denture10.5368/aedj.2011.3.4.1.2 ↗
15. 10.1016/j.dental.2007.07.00310.1016/j.dental.2007.07.003 ↗
16. Characterization on Polystyrene/Zinc Oxide nanocomposites prepared from solution mixing10.1002/pat.673 ↗
17. 10.1002/app.1286910.1002/app.12869 ↗
18. 10.1016/j.jlumin.2010.07.01310.1016/j.jlumin.2010.07.013 ↗
19. 10.1016/j.cej.2012.01.07610.1016/j.cej.2012.01.076 ↗
20. 10.1016/S1369-7021(07)70078-010.1016/S1369-7021(07)70078-0 ↗
21. 10.1016/j.polymdegradstab.2009.03.02410.1016/j.polymdegradstab.2009.03.024 ↗
22. 10.1016/j.matdes.2011.03.03810.1016/j.matdes.2011.03.038 ↗
23. Comparative study on mechanical properties of ZnO, ZrO2 and CeO2 nanometal oxides reinforced epoxy composites
24. 10.1007/s10973-010-0996-110.1007/s10973-010-0996-1 ↗
25. 10.1007/s00339-014-8554-510.1007/s00339-014-8554-5 ↗
26. 10.1021/ma062184t10.1021/ma062184t ↗
27. 10.1002/marc.20050087010.1002/marc.200500870 ↗
28. 10.1039/b405497k10.1039/b405497k ↗
29. 10.1007/s10853-014-8784-010.1007/s10853-014-8784-0 ↗
30. 10.1016/j.optmat.2013.08.02110.1016/j.optmat.2013.08.021 ↗
31. 10.1016/j.jlumin.2011.03.06510.1016/j.jlumin.2011.03.065 ↗
32. 10.1002/macp.20100019110.1002/macp.201000191 ↗
33. Synthesis and characterization of ZnO nanoparticles via precipitation method: effect of annealing temperature on particle size
34. Synthesis and characterization of ZnO nanotubes by hydrothermal method
35. 10.4047/jap.2013.5.3.24110.4047/jap.2013.5.3.241 ↗
36. 10.1177/1045441199010001050110.1177/10454411990100010501 ↗
37. Comparison of the antimicrobial capability of an abrasive paste and chemical‐soak denture cleaners10.1016/0022-3913(88)90250-8 ↗
38. 10.1016/j.matlet.2012.05.01910.1016/j.matlet.2012.05.019 ↗
39. 10.1016/j.polymdegradstab.2012.05.02210.1016/j.polymdegradstab.2012.05.022 ↗
40. Synthesis, Thermal behavior, and aggregation in aqueous solution of poly(methyl methacrylate)‐B‐Poly (2‐hydroxyethyl methacrylate)10.4067/S0717-97072013000400030 ↗
41. AnzlovarA OrelZC ZigonM.Mechanical properties of PMMA/ZnO nanocomposites. European Conference on Composite Materials Venice Italy 2012; 24‐28 June.
42. 10.1016/j.prosdent.2003.09.00810.1016/j.prosdent.2003.09.008 ↗
43. Flexural and fatigue strengths of denture base resin10.1016/S0022-3913(08)60136-5 ↗
44. Evaluation of thermal conductivity of alumina reinforced heat cure acrylic resin and some other properties
45. Reinforcement of aluminum oxide filler on the flexural strength of different types of denture base resins: an in vitro study
46. 10.5005/jp-journals-10019-100410.5005/jp-journals-10019-1004 ↗
47. Reinforcement of acrylic resins for provisional fixed restorations. Part 1: mechanical properties
48. 10.1016/S0300-5712(03)00091-510.1016/S0300-5712(03)00091-5 ↗
49. 10.1016/j.jmbbm.2014.01.00310.1016/j.jmbbm.2014.01.003 ↗
50. 10.1016/j.prosdent.2013.07.01710.1016/j.prosdent.2013.07.017 ↗
51. Effect of reinforcement of high‐impact acrylic resin with zirconia on some physical and mechanical properties
52. Flexural strength of denture base resin reinforced with aluminum oxide and processed by different processing techniques
53. 10.1016/j.jpor.2012.05.00110.1016/j.jpor.2012.05.001 ↗
54. Powers JM · 2006 · 60
55. 10.1111/j.1532-849X.2004.04043.x10.1111/j.1532-849X.2004.04043.x ↗
56. 10.1016/j.sjdr.2016.04.00410.1016/j.sjdr.2016.04.004 ↗