journal article·2025-05Open access

Additive manufacturing of ceramics via the laser powder bed fusion process

Abid Ullah, Mussadiq Shah, Zulfiqar Ali, Karim Asami, Asif Ur Rehman, Claus Emmelmann

Abstract

Abstract Additive manufacturing (AM) of ceramics presents both exciting opportunities and significant challenges, particularly with the laser‐based AM processes. Ceramics are known for their special properties, such as high strength, corrosion resistance, and temperature stability, but their inherent brittleness and high processing demands make AM more complex. This review provides an updated overview of the most common AM techniques for ceramics, including direct energy deposition, binder jetting, laminated object manufacturing, and material extrusion‐based techniques. However, the focus is placed on the laser powder bed fusion (LPBF) of ceramics, a technique that has gained increasing attention for its ability to fabricate complex ceramic parts with enhanced quality. The review delves into the key causes of critical defects commonly observed in LPBF, such as porosity, cracking, spattering, and surface roughness. Recent advancements in addressing these issues are discussed, along with the limitations of current defect prevention strategies. Furthermore, the review provides an updated analysis of the mechanical properties of LPBF‐fabricated ceramics, giving insights into how processing parameters influence the performance of ceramic LPBF‐printed parts. Modeling and simulation techniques are also reviewed, highlighting their role in enhancing understanding of ceramic behavior during LPBF. Overall, this review highlights recent progress and current challenges in ceramic AM techniques, while exploring future research opportunities, such as process optimization and defect prevention strategies.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Laser and Systems Technology Hamburg University of Technology Hamburg Germany

Centre for Additive Manufacturing School of Engineering RMIT University Melbourne VIC Australia

Institute of Chemical Technologies and Analytics Technische Universität Wien Vienna Austria

Department of Mechanical Engineering The University of Hong Kong Hong Kong SAR China

Bartlett School of Sustainable Construction University College London London UK

References (100+)

Show source-provided references
1. 10.1016/j.jiec.2020.02.00210.1016/j.jiec.2020.02.002 ↗
2. 10.1007/978-3-031-54046-2_410.1007/978-3-031-54046-2_4 ↗
3. 10.1016/j.jeurceramsoc.2023.07.03310.1016/j.jeurceramsoc.2023.07.033 ↗
4. 10.1002/adem.20050026910.1002/adem.200500269 ↗
5. 10.1007/s12008‐022‐01016‐710.1007/s12008‐022‐01016‐7 ↗
6. 10.1111/jace.1949010.1111/jace.19490 ↗
7. 10.1016/0301‐4207(91)90016‐O10.1016/0301‐4207(91)90016‐O ↗
8. 10.1007/978-3-030-85776-9_310.1007/978-3-030-85776-9_3 ↗
9. 10.1016/j.jclepro.2020.12516410.1016/j.jclepro.2020.125164 ↗
10. 10.1016/j.oceram.2023.10039910.1016/j.oceram.2023.100399 ↗
11. 10.1016/j.amf.2024.20011310.1016/j.amf.2024.200113 ↗
12. 10.1016/j.pmatsci.2020.10073610.1016/j.pmatsci.2020.100736 ↗
13. 10.1016/j.phpro.2010.08.08610.1016/j.phpro.2010.08.086 ↗
14. SrivastavaM RatheeS MaheshwariS KundraTK.Comparison of additive manufacturing with conventional manufacturing processes. Presented at the September 17.2019.10.1201/9781351049382-2 ↗
15. 10.1016/j.jmsy.2024.01.00410.1016/j.jmsy.2024.01.004 ↗
16. Wohlers Associates: Wohlers Report 2024.2024.https://www.3dnatives.com/en/wohlers‐report‐2024‐growth‐of‐metal‐additive‐manufacturing‐040420245/
17. 10.1108/RPJ‐11‐2015‐017810.1108/RPJ‐11‐2015‐0178 ↗
18. 10.1016/j.jmapro.2021.12.03310.1016/j.jmapro.2021.12.033 ↗
19. 10.1016/j.matdes.2021.10953610.1016/j.matdes.2021.109536 ↗
20. 10.1016/j.oceram.2024.10061410.1016/j.oceram.2024.100614 ↗
21. 10.1007/s00170‐024‐13491‐110.1007/s00170‐024‐13491‐1 ↗
22. 10.1080/00914037.2024.231460110.1080/00914037.2024.2314601 ↗
23. 10.1016/j.cej.2024.15270310.1016/j.cej.2024.152703 ↗
24. 10.1007/s40964‐024‐00722‐w10.1007/s40964‐024‐00722‐w ↗
25. 10.1016/j.matdes.2023.11175110.1016/j.matdes.2023.111751 ↗
26. 10.1021/acsbiomaterials.2c0116410.1021/acsbiomaterials.2c01164 ↗
27. 10.3390/mi1408156410.3390/mi14081564 ↗
28. 10.1007/s10853‐024‐09925‐610.1007/s10853‐024‐09925‐6 ↗
29. 10.1016/j.matdes.2024.11263210.1016/j.matdes.2024.112632 ↗
30. 10.1016/j.compositesa.2023.10794110.1016/j.compositesa.2023.107941 ↗
31. 10.1016/j.optlastec.2024.11116010.1016/j.optlastec.2024.111160 ↗
32. 10.1016/j.matchemphys.2024.12933710.1016/j.matchemphys.2024.129337 ↗
33. 10.1007/s00170‐019‐03669‐310.1007/s00170‐019‐03669‐3 ↗
34. 10.1108/RPJ‐12‐2021‐034210.1108/RPJ‐12‐2021‐0342 ↗
35. 10.1051/matecconf/20244010200710.1051/matecconf/202440102007 ↗
36. 10.3389/fchem.2023.103447310.3389/fchem.2023.1034473 ↗
37. KeicherDM JellisonJL SchanwaldLP RomeroJA AbbottDH.Towards a reliable laser spray powder deposition system through process characterization. Presented at the.1995.
38. FanZ TanQ KangC HuangH.Advances and challenges in direct additive manufacturing of dense ceramic oxides.2024.10.1088/2631-7990/ad5424 ↗
39. 10.1016/j.addma.2019.10093210.1016/j.addma.2019.100932 ↗
40. 10.1007/s00170‐017‐0139‐y10.1007/s00170‐017‐0139‐y ↗
41. 10.1016/j.matdes.2018.06.00910.1016/j.matdes.2018.06.009 ↗
42. 10.1016/j.ceramint.2019.04.01210.1016/j.ceramint.2019.04.012 ↗
43. FeildenE.Additive manufacturing of ceramics and ceramic composites via robocasting.2017.
44. 10.1016/j.jeurceramsoc.2020.01.06110.1016/j.jeurceramsoc.2020.01.061 ↗
45. 10.1016/j.ceramint.2021.09.21310.1016/j.ceramint.2021.09.213 ↗
46. 10.1016/j.jmapro.2024.03.11210.1016/j.jmapro.2024.03.112 ↗
47. 10.1080/21870764.2024.232452610.1080/21870764.2024.2324526 ↗
48. 10.1002/adem.20220052010.1002/adem.202200520 ↗
49. WeissLE PrinzFB.Novel applications and implementations of shape deposition manufacturing. Presented at the.1998.
50. 10.1016/S0278-6125(97)89095-410.1016/S0278-6125(97)89095-4 ↗
51. 10.1080/09506608.2020.178461610.1080/09506608.2020.1784616 ↗
52. Pennstate: $4.5M grant to fund 3D‐printed high‐performance ceramics project https://www.matse.psu.edu/article/45m‐grant‐fund‐3d‐printed‐high‐performance‐ceramics‐project
53. 10.1063/1.493780910.1063/1.4937809 ↗
54. 10.1080/17452759.2020.177999910.1080/17452759.2020.1779999 ↗
55. 10.1007/978-1-4939-2113-310.1007/978-1-4939-2113-3 ↗
56. 10.1007/s11831‐021‐09601‐x10.1007/s11831‐021‐09601‐x ↗
57. 10.1016/j.optlastec.2024.11148010.1016/j.optlastec.2024.111480 ↗
58. 10.1016/j.optlastec.2024.11161210.1016/j.optlastec.2024.111612 ↗
59. 10.1016/j.jmst.2021.03.05810.1016/j.jmst.2021.03.058 ↗
60. 10.1016/j.euromechsol.2024.10545810.1016/j.euromechsol.2024.105458 ↗
61. 10.1007/s40195‐023‐01654‐010.1007/s40195‐023‐01654‐0 ↗
62. 10.1016/j.compstruct.2024.11869310.1016/j.compstruct.2024.118693 ↗
63. 10.1016/j.mtcomm.2024.11000110.1016/j.mtcomm.2024.110001 ↗
64. 10.1016/j.jeurceramsoc.2024.11707210.1016/j.jeurceramsoc.2024.117072 ↗
65. 10.1016/j.ceramint.2023.11.28910.1016/j.ceramint.2023.11.289 ↗
66. 10.1016/j.smmf.2024.10004810.1016/j.smmf.2024.100048 ↗
67. 10.1016/j.jmst.2022.12.07810.1016/j.jmst.2022.12.078 ↗
68. 10.1016/j.addma.2024.10452710.1016/j.addma.2024.104527 ↗
69. 10.1016/j.ceramint.2023.11.16210.1016/j.ceramint.2023.11.162 ↗
70. 10.1016/j.ceramint.2022.04.02910.1016/j.ceramint.2022.04.029 ↗
71. 10.1016/j.ceramint.2018.09.14910.1016/j.ceramint.2018.09.149 ↗
72. 10.1016/j.addma.2019.10095910.1016/j.addma.2019.100959 ↗
73. 10.1016/j.addma.2023.10362710.1016/j.addma.2023.103627 ↗
74. 10.1007/s40964‐022‐00305‐710.1007/s40964‐022‐00305‐7 ↗
75. 10.1557/jmr.2014.12710.1557/jmr.2014.127 ↗
76. 10.1007/978-981-19-2293-0_410.1007/978-981-19-2293-0_4 ↗
77. 10.1002/adma.20160658610.1002/adma.201606586 ↗
78. 10.1016/j.apmt.2021.10104910.1016/j.apmt.2021.101049 ↗
79. 10.1016/j.optlastec.2015.09.02510.1016/j.optlastec.2015.09.025 ↗
80. 10.1016/j.addma.2024.10442010.1016/j.addma.2024.104420 ↗
81. 10.1007/978-3-662-64585-7_510.1007/978-3-662-64585-7_5 ↗
82. 10.1016/j.jallcom.2023.17333810.1016/j.jallcom.2023.173338 ↗
83. 10.1007/s00170‐024‐13511‐010.1007/s00170‐024‐13511‐0 ↗
84. 10.1111/jace.1938510.1111/jace.19385 ↗
85. 10.1038/s41467‐020‐16188‐710.1038/s41467‐020‐16188‐7 ↗
86. 10.1016/j.jeurceramsoc.2023.05.00810.1016/j.jeurceramsoc.2023.05.008 ↗
87. 10.1002/adem.20220049210.1002/adem.202200492 ↗
88. 10.1016/j.jallcom.2022.16809810.1016/j.jallcom.2022.168098 ↗
89. 10.1016/j.msea.2017.11.10310.1016/j.msea.2017.11.103 ↗
90. 10.1108/RPJ‐03‐2020‐005010.1108/RPJ‐03‐2020‐0050 ↗
91. 10.1111/jace.1958610.1111/jace.19586 ↗
92. FedinaT.Laser beam‐material interaction in Powder Bed Fusion.
93. 10.1016/j.procir.2022.08.13410.1016/j.procir.2022.08.134 ↗
94. 10.1117/12.250956010.1117/12.2509560 ↗
95. 10.1016/j.optlastec.2018.03.02910.1016/j.optlastec.2018.03.029 ↗
96. 10.1002/phvs.20240002110.1002/phvs.202400021 ↗
97. 10.1007/s11837‐023‐06363‐810.1007/s11837‐023‐06363‐8 ↗
98. 10.2351/7.000156210.2351/7.0001562 ↗
99. 10.2351/7.000158210.2351/7.0001582 ↗
100. 10.1016/j.addlet.2024.10021110.1016/j.addlet.2024.100211 ↗