Study on thermo-mechanical decoupling for thermal accelerated aging of bonded structures under load
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Energetic Materials and Combustion · Rocket and propulsion systems research · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Effects of helium injection scheme on the thrust performance of solid-gas hybrid rocket motor
2. Framework of typical defects detection method for solid rocket motor based on interpretable knowledge-driven three-dimensional modeling and X-ray digital twin simulation10.1016/j.ast.2026.111761 ↗
3. Numerical investigation of the velocity-coupled response of propellant burning rate in a solid rocket motor10.1016/j.ast.2025.110118 ↗
4. A constitutive model of solid propellants considering aging and confinement pressure10.1002/prep.202300286 ↗
5. Low strain rate yield characteristics and failure modes of solid composite propellant10.1016/j.engfailanal.2023.107364 ↗
6. Structural assessment of a solid propellant rocket motor: effects of aging and damage10.1016/j.ast.2011.01.002 ↗
7. Ageing studies on AP/HTPB based composites solid propellants10.1016/j.enmf.2021.02.001 ↗
8. Semi-empirical model for rubber shrinkage and debonding in solid rocket motors10.1007/s40430-024-05067-7 ↗
9. Viscoelastic cohesive zone modeling for mode II fracture between propellant and insulation10.1016/j.ijadhadh.2022.103118 ↗
10. Multiobjective optimization of stress-release boot of solid rocket motor under vertical storage based on RBF model
11. Shear creep and failure model of bonded interface in solid rocket motors10.1016/j.ast.2025.110915 ↗
12. Shear creep analysis of solid rocket motor bonding interface and rapid prediction model10.1002/prep.202300070 ↗
13. Analysis and prediction for dynamic migration behavior of NEPE propellant/liner interface layer full components10.1016/j.polymertesting.2024.108583 ↗
14. Migration kinetics and mechanisms of plasticizers, stabilizers at interfaces of NEPE propellant/HTPB liner/EDPM insulation10.1016/j.jhazmat.2012.05.103 ↗
15. Influence of the binder structure on the interfacial adhesion and antimigration properties of the propellant charge10.1021/acsomega.1c06929 ↗
16. Effects of accelerated aging and primer on the mechanical properties and bond strength at propellant liner interfaces
17. Creep deformation property of MCrAlY bond coatings by high-temperature creep indentation tests10.1007/s11666-023-01644-9 ↗
18. Long-term prediction of creep and stress-relaxation behaviour in synthetic fabrics using the time–temperature superposition principle10.1007/s12221-023-00181-0 ↗
19. A triaxial creep model for deep coal considering temperature effect based on fractional derivative10.1007/s11440-021-01302-w ↗
20. Assessment of creep reduction factors of high-density polyethylene geogrids using conventional and stepped isothermal methods10.3390/ma19040714 ↗
21. Structural response analysis of a solid rocket motor charge under temperature and internal pressure loads10.1088/1742-6596/2764/1/012021 ↗
22. Simulation of aging and bonding properties of the matrix/filler interface in particle-reinforced composites10.3390/polym17111557 ↗
23. Research advances in bonding agents for composite propellants10.1002/prep.201900329 ↗
24. Factors affecting the ageing of polymer composite: a state of art10.1016/j.polymdegradstab.2024.110670 ↗
25. Effect of seawater immersion on the drill induced delamination failure in glass fiber reinforced polymer composites – experimental and statistical analysis10.1016/j.engfailanal.2022.106803 ↗
26. An analytical framework to assess the chemical changes in polymer-modified bitumen upon natural and simulated ageing10.1016/j.fuel.2024.133257 ↗
27. The creep performance of bio-based and synthetic lining adhesives at different environmental conditions10.1016/j.ijadhadh.2022.103119 ↗
28. Effect of thermo-mechanical ageing on materials and interface properties in flexible microelectronic devices10.1016/j.microrel.2021.114162 ↗
29. The effect of thickener structure degradation on tribological properties: study on the decay mechanism of polyurea grease under mechanical-thermal aging conditions10.1016/j.triboint.2024.109576 ↗
30. Evolution of crosslinking structure in vulcanized natural rubber during thermal aging in the presence of a constant compressive stress10.1016/j.polymdegradstab.2023.110513 ↗
31. Thermal-aging constitutive model for a silicone rubber foam under compression10.1016/j.polymdegradstab.2022.109873 ↗
32. Interlayer damage analysis of resin based fibre composites under hygrothermal and load coupling environment10.1080/09276440.2025.2491841 ↗
33. Mechanical behavior and fracture characteristics of polymeric pipes under curved three point bending tests: experimental and numerical approaches10.1016/j.engfailanal.2022.106352 ↗
34. Structural integrity assessment of an NEPE propellant grain considering the tension–compression asymmetry in its mechanical property10.3390/polym15163339 ↗
35. Effect of mechanical heterogeneity on the structural integrity of HTPB propellant grain10.3390/ma16134590 ↗
36. Numerical analysis of curing residual stress and strain in NEPE propellant grain10.3390/polym15041019 ↗