Does the type of zirconia cleaners affect adhesion of resin cement to saliva contaminated zirconia?
Source abstract
Abstract
This study evaluated the effectiveness of three commercial zirconia cleaning agents in improving shear bond strength (SBS) between resin cement and zirconia surfaces after saliva contamination, considering the influence of prior air-particle abrasion and aging. Zirconia specimens were assigned according to surface treatment (with or without air-particle abrasion) and cleaning protocol: control, water spray, Ivoclean, Katana Cleaner, ZirClean, and air-particle abrasion. Following saliva contamination, cleaning procedures were performed according to manufacturers' instructions, and resin cement cylinders (Panavia V5, Kuraray Noritake Dental Inc.) were bonded to the zirconia surfaces. SBS was evaluated under Dry and thermocycling conditions. Statistical analysis was performed using two-way ANOVA and Tukey's post hoc tests (α = 0.05). Reliability was assessed using Weibull analysis, failure modes were classified under stereomicroscopy, and Energy Dispersive Spectroscopy (EDS) was conducted to characterize cleaner composition and detect possible surface residues. Surface treatment, cleaning protocol, and their interaction significantly affected SBS in both conditions (p < 0.001). Cleaning procedures improved adhesion even in non-contaminated control specimens. Air-particle abrasion produced the highest SBS values regardless of the cleaner applied. Without prior abrasion, Ivoclean demonstrated superior bond durability after thermocycling compared with the other cleaning protocols. Weibull analysis indicated similar reliability among groups in the Dry condition and increased variability after aging. Failure types were predominantly adhesive across groups. EDS confirmed compositions consistent with cleaner formulations and revealed no detectable cleaner residues on zirconia surfaces. Zirconia cleaning agents enhanced adhesion even without visible contamination, while air-particle abrasion remained the most influential factor for bonding performance and durability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Dental materials and restorations · Endodontics and Root Canal Treatments · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Novel zirconia materials in dentistry10.1177/0022034517737483 ↗
2. Ceramics overview10.1038/s41415-022-4242-6 ↗
3. Performance of dental ceramics: challenges for improvements10.1177/0022034510391795 ↗
4. Bonding to oxide ceramics-laboratory testing versus clinical outcome10.1016/j.dental.2014.06.007 ↗
5. Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis
6. Bonding of composite cements to zirconia: a systematic review and meta-analysis of in vitro studies10.1016/j.jmbbm.2018.02.008 ↗
7. The effect of resin bonding on long-term success of high-strength ceramics10.1177/0022034517729134 ↗
8. Influence of saliva contamination on zirconia ceramic bonding10.1016/j.dental.2007.04.013 ↗
9. Cleaning zirconia surface prior to bonding: a comparative study of different methods and solutions10.1111/jopr.13389 ↗
10. Chemistry of zirconia and its use in chromatography10.1016/0021-9673(93)80284-F ↗
11. Cleaning methods of contaminated zirconia: a systematic review and meta-analysis10.1016/j.dental.2023.01.009 ↗
12. Ivoclar Vivadent · 2025
13. 2022
14. 2024
15. Fluoride taken up by plaque, by the underlying enamel and by clean enamel from three fluoride compounds in vitro
16. 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures10.1016/j.dental.2006.03.008 ↗
17. Effects of saliva contamination on resin-resin bond strength10.1016/S0109-5641(03)00066-6 ↗
18. Effect of biological contamination on dentine bond strength of adhesive resins
19. Effect of sandblasting on the long-term performance of dental ceramics10.1002/jbm.b.30097 ↗
20. Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading10.1016/j.jmbbm.2013.01.005 ↗
21. Influence of contamination and cleaning on bond strength to modified zirconia10.1016/j.dental.2009.07.007 ↗
22. Self-assembled Nano-layering at the adhesive interface10.1177/0022034512437375 ↗
23. Effect of cleansing methods on saliva-contaminated zirconia--an evaluation of resin bond durability10.2341/13-323-L ↗
24. Cleaning methods for zirconia following salivary contamination10.1111/jopr.12441 ↗
25. MDP is effective for removing residual polycarboxylate temporary cement as an adhesion inhibitor10.4012/dmj.2020-132 ↗
26. Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding10.4047/jap.2015.7.2.85 ↗
27. Effect of different cleansing agents and adhesive resins on bond strength of contaminated zirconia10.1016/j.jpor.2018.12.007 ↗
28. Influence of cleaning methods on resin bonding to contaminated translucent 3Y-TZP ceramic
29. Effect of zirconia decontamination protocols on bond strength and surface wettability10.1111/jerd.12615 ↗
30. Effect of decontamination and cleaning on the shear bond strength of high translucency zirconia10.3390/dj5040032 ↗
31. A practical and systematic review of weibull statistics for reporting strengths of dental materials10.1016/j.dental.2009.09.006 ↗
32. Ceramic materials in dentistry: historical evolution and current practice10.1111/j.1834-7819.2010.01299.x ↗