Phenolic adhesives based on eucalyptus pyrolytic oil: Effect of urea addition on synthesis and properties
Source abstract
Abstract
Abstract The present work aimed to evaluate the effect of urea addition on the synthesis parameters and properties of phenolic adhesives produced with oil from the pyrolysis of eucalyptus wood. The adhesive formulations were synthesized according to an entirely randomized design involving two formaldehyde/demethylated oil (F/DO) molar ratios (1.4 and 1.7), three NaOH/DO molar ratios (0.9, 1.0 and 1.1) and five levels of urea (0, 5, 10, 15 and 20%), totalizing 30 formulations. The following parameters and properties were obtained: reaction time (min) and temperature (°C); solids content (%), gel time (s), viscosity (cP) and pH. Regression analysis was performed and quadratic models were adjusted for reaction conditions (time and temperature) and some adhesive properties. Synthesis reactions were more controllable in terms of reaction time in the following conditions: urea addition in levels from 5 to 15% with F/DO molar ratio of 1.7 and NaOH/DO molar ratio of 1.0.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lignin and Wood Chemistry · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. CGEE – Centro de Gestão e Estudos Estratégicos. Modernização da produção de carvão vegetal. Relatório Técnico. Brasília, Brazil; 2014.
2. Silva · 2012
3. Chum H, Diebold J, Scahill J, Thompson D, Black S, Schroeder H, et al. Adhesives from Renewable resources. in: Hemingway R.W. editor. Biomass pyrolysis oil Feed. phenolic Adhes., American Chemical Society Symposium Series; 1989, p. 135–1.10.1021/bk-1989-0385.ch011 ↗
4. Wood tar pitch as phenolic resin precursor
5. Eucalyptus tar and creosote based adhesives for flakeboard production
6. Utilização de alcatrão vegetal na produção de resinas fenólicas
7. Wood adhesives made with pyrolysis oils. Wood Adhes Mad with Pyrolysis Oils
8. Alves · 2003
9. Wood adhesives from eucalyptus tar and creosote10.1590/S0100-40421997000400005 ↗
10. Carazza F, Pereira MOS, Pereira NS, Alcântara MFC, Braga JV, Faix O, et al. Fine chemicals from syringil rich fraction of tar obtained from Eucalyptus sp. Wood. Proceedings 1st Eur. Work. Lignocellul. Pulp – Util. Anal. Lignins., Hamburg, p. 207–212; 1991.
11. Adesivos à base de creosoto vegetal desmetilado: efeito dos compostos não fenólicos na eficiência da colagem de madeira
12. Processo de Desmetilação de Creosoto Vegetal
13. Evaluation of Acute Toxicity and Genotoxicity of Liquid Products from Pyrolysis of Eucalyptus grandis Wood10.1007/s002449910022 ↗
14. Production of renewable phenolic resins by thermochemical conversion of biomass: a review10.1016/j.rser.2007.04.008 ↗
15. Kraft lignin utilization in adhesives10.1007/BF00355851 ↗
16. Schroeder HA, Thompson GE Substituting phenol in adhesive with demethylated kraft lignin. International Part. board Compos. Mater. Proceedings, Washington, D.C; 1990, p. 27–42.
17. hatt MV, Kulkarni SU. Synthesis (Stuttg); 1993, 6, pp. 249–82.
18. Lithium chloride-catalyzed selective demethylation of aryl methyl ethers under microwave irradiation10.1016/j.molcata.2007.04.013 ↗
19. Egreja · 2000
20. Effect of pH variation and synthesis temperature on the performance of thermosetting adhesive formulations based on demethylated wood creosote-formaldehyde10.1590/S0100-67622003000400016 ↗
21. Pyrogallol–formaldehyde thermosetting adhesives10.1002/(SICI)1097-4628(19970711)65:2<399::AID-APP21>3.0.CO;2-U ↗
22. On the chemistry, behavior, and cure acceleration of phenol–formaldehyde resins under very alkaline conditions10.1002/app.1993.070491212 ↗
23. Non-emulsifiable, water-based, mixed diisocyanate adhesive systems for exterior plywood. part ii. theory application and industrial results
24. Fast advancement and hardening acceleration of low-condensation alcaline PF resins by esters and copolymerized urea10.1002/(SICI)1097-4628(19991010)74:2<359::AID-APP18>3.0.CO;2-A ↗
25. Hot setting tannin-urea-formaldehyde exterior wood adhesives
26. Non-Emulsifiable, water-based, mixed diisocyanate adhesive systems for exterior plywood - part i. novel reaction mechanisms and their chemical evidence
27. Curing characteristics and adhesion performance of phenol-formaldehyde resins with composite additives
28. Calorimetric and rheological study of isocyanate–pyrolysis oil blends10.1002/app.12315 ↗
29. Adhesives made from isocyanates and pyrolysis oils for wood composites10.1515/HF.2004.060 ↗
30. Test to verify the identity of regression models and equality of some parameters in polynomial orthogonal model
31. Identity tests for regression models
32. European Committee for Standardization. EN 314−1 - Plywood - Bonding quality,test methods; 2004.
33. European Committee for Standartization. EN 314-2 - Plywood - Bonding quality -requeriments; 2002.