Penetration inhibitor potential of ceramic waste–cement composites exposed to coastal environments
Source abstract
Abstract
An intricate relationship exists between the durability performance of reinforced concrete and the migration of chloride ions, particularly in marine and coastal environments. The aim of this work was to study the influence of ceramic waste (CW) as cement replacement on the chloride migration of limestone aggregate concrete, based upon rapid chloride migration testing through the non-steady-state migration coefficient according to NT build 492. The chloride penetration inhibitor potential of CW in concrete was assessed through physical and chemical analyses. Mortar and concrete samples with two different water/binder ratios (0.5 and 0.7) were designed. The cement replacement ratios were 10, 15 and 20% by weight. The focus of the study was on the transport properties (particle size distribution, density, absorption, capillarity, sorptivity, chloride migration coefficient) and mechanical properties (compressive strength, strength activity index), along with chemical and environmental (cement intensity index) characterisation of CW–cement concretes. The results showed a significant improvement in the chloride penetration resistance of the CW–cement concrete, even considering the selection of limestone aggregates. The concomitant pozzolanic/filler effect of CW particles provided further densification and refinement of the microstructure, leading to enhancements in the physical and mechanical properties, and thus in the eco-efficiency of the CW-blended concrete.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Tecnológico Nacional de México/I. T. de Chetumal , Chetumal,
CONAHCYT-Tecnológico Nacional de México/I. T. de Chetumal , Chetumal,
IxM-SECIHTI-Tecnológico Nacional de México/I.T. Chetumal ,
References (100+)
Show source-provided references
1. Using supplementary cementitious materials to mitigate alkali-silica reaction in concrete with recycled-concrete aggregate10.1061/(asce)mt.1943-5533.0003277 ↗
2. Afnor (Association Française de Normalisation) · 2010
3. A scientometric review of waste material utilization in concrete for sustainable construction10.1016/j.cscm.2021.e00683 ↗
4. Application of waste ceramic powder as a cement replacement in reinforced concrete beams toward sustainable usage in construction10.1016/j.cscm.2023.e02444 ↗
5. Effect of absorption of limestone aggregates on strength and slump loss of concrete10.1016/j.cemconcomp.2009.04.010 ↗
6. Chloride diffusion models for plain and blended cement concretes exposed to laboratory and atmospheric marine conditions10.1016/j.jmrt.2021.12.136 ↗
7. From dredged sediment to supplementary cementitious material: characterization, treatment, and reuse10.1016/j.ijsrc.2020.06.002 ↗
8. Supplementary cementitious materials origin from agricultural wastes – A review10.1016/j.conbuildmat.2014.10.010 ↗
9. ASTM · 200610.1520/C0642-06 ↗
10. ASTM · 201310.1520/C1585-13 ↗
11. ASTM · 201510.1520/C0192_C0192M-15 ↗
12. ASTM · 201510.1520/C1437-15 ↗
13. ASTM · 2018
14. ASTM · 201810.1520/C0311_C0311M-18 ↗
15. ASTM · 201810.1520/C0039_C0039M-18 ↗
16. ASTM · 201910.1520/C0618-19 ↗
17. ASTM · 202110.1520/C0778-21 ↗
18. ASTM · 202210.1520/C0150_C0150M-22 ↗
19. ASTM · 202210.1520/C1202-22 ↗
20. Acid activated smectite clay as pozzolanic supplementary cementitious material10.1016/j.cemconres.2022.106969 ↗
21. An evaluation of the recycled aggregate characteristics and the recycled aggregate concrete mechanical properties10.1016/j.conbuildmat.2019.117978 ↗
22. Study of short range structure of amorphous silica from PDF using Ag radiation in laboratory XRD system, RAMAN and NEXAFS10.1016/j.jnoncrysol.2018.02.037 ↗
23. Ability of the R3 test to evaluate differences in early age reactivity of 16 industrial ground granulated blast furnace slags (GGBS)10.1016/j.cemconres.2020.105998 ↗
24. BSI · 2011
25. A whole-economy deep decarbonization pathway for Mexico10.1016/j.esr.2020.100578 ↗
26. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
27. Evaluation of industrial by-products as pozzolans: a road map for use in concrete production10.1016/j.cscm.2020.e00424 ↗
28. The effects of limestone aggregate on concrete properties10.1016/j.conbuildmat.2010.05.008 ↗
29. Recent advances in the use of green corrosion inhibitors to prevent chloride-induced corrosion in reinforced concrete10.3390/ma16237462 ↗
30. Mechanical property, sorptivity and microstructure of steam-cured concrete incorporated with the combination of metakaolin-limestone10.1016/j.cscm.2019.e00267 ↗
31. Sustainable reuse of ceramic waste powder as a supplementary cementitious material in recycled aggregate concrete: mechanical properties, durability and microstructure assessment10.1016/j.jobe.2022.104418 ↗
32. Evaluation of self-healing in concrete with limestone coarse aggregate impregnated with Na2SiO3 solution10.1088/2053-1591/ac513d ↗
33. Measuring the eco-efficiency of cement use10.1016/j.cemconcomp.2010.07.009 ↗
34. Comparison of test methods to assess pozzolanic activity10.1016/j.cemconcomp.2009.10.008 ↗
35. Calcareous and granite aggregate concretes after fire10.1016/j.jobe.2016.09.009 ↗
36. Revealing the effect mechanism of calcareous aggregate and silica aggregate on the strength of ordinary concrete: experiments, microscopic characterization, and molecular simulation10.1016/j.jobe.2023.106646 ↗
37. Fagerlund · 1982
38. Sorptivity limits for specification of durable concretes
39. Cement, carbon dioxide, and the “necessity” narrative: a case study of Mexico10.1016/j.geoforum.2013.06.003 ↗
40. Chloride in cement10.1680/adcr.13.00067 ↗
41. A review on the utilization of ceramic waste in sustainable construction products10.1016/j.matpr.2020.10.829 ↗
42. Optimum utilization of ceramic tile waste for enhancing concrete properties10.1016/j.matpr.2021.08.011 ↗
43. A life-cycle approach to environmental, mechanical, and durability properties of “green” concrete mixes with rice husk ash10.1016/j.jclepro.2015.06.029 ↗
44. Water movement in porous building materials—IX. The water absorption and sorptivity of concretes10.1016/0360-1323(87)90044-8 ↗
45. Compressive strength estimation and CO2 reduction design of fly ash composite concrete10.3390/buildings12020139 ↗
46. The chloride-induced corrosion of a fly ash concrete with nanoparticles and corrosion inhibitor10.1016/j.conbuildmat.2020.122097 ↗
47. Chloride ion penetration into mortar containing ceramic waste aggregate10.1016/j.conbuildmat.2012.01.018 ↗
48. A visual investigation on chloride ingress into ceramic waste aggregate mortars having different water to cement ratios10.1016/j.conbuildmat.2012.11.078 ↗
49. Comparison of test methods to determine resistance to chloride penetration in concrete: sensitivity to the effect of fly ash10.1016/j.conbuildmat.2021.122265 ↗
50. Red ceramic waste as supplementary cementitious material: Microstructure and mechanical properties10.1016/j.conbuildmat.2021.123653 ↗
51. Chloride migration in cement mortars with ultra-low water to binder ratio10.1016/j.cemconcomp.2021.103974 ↗
52. Model for forecasting the sorptivity of concretes with recycled concrete aggregate10.1016/j.proeng.2016.08.109 ↗
53. Supplementary cementitious materials: New sources, characterization, and performance insights10.1016/j.cemconres.2019.05.008 ↗
54. Effect of fineness of basaltic volcanic ash on pozzolanic reactivity, ASR expansion and drying shrinkage of blended cement mortars10.3390/ma12162603 ↗
55. Measuring and time variability of the sorptivity of concrete10.1016/j.proeng.2013.04.080 ↗
56. Variability of sorptivity in the concrete element according to the method of compacting10.1016/j.proeng.2016.08.127 ↗
57. Langer · 201610.1016/b978-0-08-100370-1.00009-3 ↗
58. Chemical, microstructural and mechanical properties of ceramic waste blended cementitious systems10.1016/j.jclepro.2018.11.240 ↗
59. Influence of carbonation on the chloride ingress into concrete: theoretical analysis and application to durability design10.1016/j.cemconres.2019.105788 ↗
60. Chloride immobilization of cement-based material containing nano-Al2O310.1016/j.conbuildmat.2019.05.148 ↗
61. Use of recycled mixed aggregates in floor blocks manufacturing10.1016/j.jclepro.2017.08.193 ↗
62. Freeze-thaw, chloride penetration and carbonation resistance of natural and recycled aggregate concrete containing rice husk ash as replacement of cement10.1016/j.jobe.2024.108889 ↗
63. Durability characteristics of ceramic waste based light weight concrete10.14419/ijet.v7i3.12.16109 ↗
64. Durability performance of concrete with fly ash as fine aggregate eroded by chloride salt10.1155/2022/6760385 ↗
65. Chemometric-driven quantification of construction and demolition waste using Raman spectroscopy and SWIR: enhancing sustainability in the ceramic sector10.1016/j.resconrec.2023.107259 ↗
66. Use of waste ceramics to produce sustainable concrete: a review10.1016/j.clema.2022.100085 ↗
67. Evaluating the effect of calcination and grinding of corn stalk ash on pozzolanic potential for sustainable cement-based materials10.1155/2020/1619480 ↗
68. Supplementary cementitious materials to mitigate greenhouse gas emissions from concrete: can there be too much of a good thing10.1016/j.jclepro.2018.01.008 ↗
69. Achieving net zero greenhouse gas emissions in the cement industry via value chain mitigation strategies10.1016/j.oneear.2021.09.011 ↗
70. Carbonation coefficients from concrete made with high-absorption limestone aggregate10.1155/2013/734031 ↗
71. The influence of fine aggregates on Portland cement mortar compressive strength10.1016/j.rinma.2021.100182 ↗
72. The influence of fine aggregates on Portland cement mortar compressive strength10.1016/j.rinma.2021.100182 ↗
73. Chloride migration characteristics and reliability of reinforced concrete highway structures in Pennsylvania10.1016/j.conbuildmat.2019.117045 ↗
74. Strength and durability study on cement mortar with ceramic waste and micro-silica
75. An overview of environmental sustainability in cement and steel production10.1016/j.jclepro.2019.05.251 ↗
76. Effect of coupled deterioration mechanisms on corrosion of steel reinforcement: the role of chloride ion ingress, freeze–thaw cycles and green corrosion inhibitor10.1007/s40735-021-00564-x ↗
77. Nordtest (1999) Concrete, Mortar and Cement-based Repair Materials: Chloride Migration Coefficient from Non-steady-state Migration Experiments (Build NT 492).
78. Physiochemical characterization of agricultural waste biochars for partial cement replacement10.1108/IJBPA-04-2020-0026 ↗
79. Corrosion inhibitors for chlorides induced corrosion in reinforced concrete structures10.1016/j.cemconres.2005.11.007 ↗
80. Effects of corrosion inhibitor and functional components on the electrochemical and mechanical properties of concrete subject to chloride environment10.1016/j.conbuildmat.2020.119724 ↗
81. Environmental sustainability in cement industry: an integrated approach for green and economical cement production10.1016/j.resenv.2021.100024 ↗
82. The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay10.1016/j.cscm.2022.e01242 ↗
83. Effect of ceramic waste powder on alkali-activated slag pastes cured in hot weather after exposure to elevated temperature10.1016/j.cemconcomp.2020.103617 ↗
84. Use of ceramic wastes as aggregates in concrete production: a review10.1016/j.jobe.2021.102567 ↗
85. The effect of incineration temperature to the chemical and physical properties of ultrafine treated rice husk ash (UFTRHA), as supplementary cementing material (SCM)10.1016/j.proeng.2016.06.515 ↗
86. Chloride diffusion in concrete made with coal fly ash ternary and ground granulated blast-furnace slag Portland cements10.3390/ma15248914 ↗
87. Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
88. Advances in understanding cement hydration mechanisms10.1016/j.cemconres.2019.105823 ↗
89. Assessing, understanding and unlocking supplementary cementitious materials10.21809/rilemtechlett.2016.12 ↗
90. Evaluation of concrete made with crushed limestone aggregate based on ultrasonic pulse velocity10.1016/j.conbuildmat.2007.01.014 ↗
91. Spragg · 2016 · 21110.1016/B978-1-78242-381-2.00011-0 ↗
92. Effectiveness of ceramic tile polishing residues as supplementary cementitious materials for cement mortars10.1016/j.susmat.2015.05.001 ↗
93. Predicting chloride ingression in concrete containing different SCMs based on chloride binding and electrical resistivity10.1016/j.conbuildmat.2024.134928 ↗
94. Towards a generic approach to durability: factors affecting chloride transport in binary and ternary cementitious materials10.1016/j.cemconres.2019.105783 ↗
95. Examining the pozzolanicity of supplementary cementitious materials using isothermal calorimetry and thermogravimetric analysis10.1016/j.cemconcomp.2017.07.009 ↗
96. Using ceramic waste tile powder as a sustainable and eco-friendly partial cement replacement in concrete production10.1016/j.matpr.2023.04.060 ↗
97. Investigation of cementitious properties of different constituents in municipal solid waste incineration bottom ash as supplementary cementitious materials10.1016/j.jclepro.2020.120675 ↗
98. Influence of quartz powder and silica fume on the performance of Portland cement10.1038/s41598-020-78567-w ↗
99. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
100. Assessment of pozzolanic activity of different calcined clays10.1016/j.cemconcomp.2013.01.002 ↗