A fracture analysis of cathodic delamination at polyurea/steel interfaces

Abstract A fracture mechanics approach to accelerated life testing of cathodic delamination between steel and polyurea is presented. This required the hyperelastic behavior of the polyurea to be described by the Marlow model based on uniaxial tension and plane strain compression tests. Time-dependence was also considered but could be neglected if proper test protocols were followed in cathodic delamination tests using a strip blister specimen. The variation of J-integral with specimen geometry and loading parameter was obtained, which allowed the resistance to cathodic delamination to be expressed in terms the J-integral and the crack speeds obtained from the tests at several temperatures. The approach established that both temperature and stress can be used to accelerate the cathodic delamination, thereby providing a quantitative and rational basis for conducting accelerated testing. In addition, the discriminating nature of the approach for design purposes was exemplified by quantitatively establishing differences in the delamination resistance of three surface treatments.