Graphene modified high-temperature resistant adhesive for bonding carbon/carbon composites: Microstructure characterization and properties study
Source abstract
Abstract
Abstract A novel graphene modified high-temperature resistant adhesive for bonding carbon/carbon composites was developed. The effects of graphene content on the mechanical properties, thermal conductivities and braking properties of the carbon/carbon joints were studied. When the graphene content in the adhesive was 1.5 wt%, the specimens possessed the bonding strength of 13.2 MPa and the thermal conductivity of 23.89 W/(m•k), which were 63.09% and 145.03% higher than those of 0.0 wt%, respectively, and 24.38% and 64.53% higher than those of 5.0 wt%, respectively. The excellent properties were attributed to the uniform dispersion of graphene in the adhesive matrix, which could effectively reduce the stress concentration and provide a fast heat conductivity network chain. The adhesive properties also had an obvious influence on the braking performance. Finite element analysis considered that the main reason for the difference in braking performance was that the temperature and field distribution on the friction surface were affected by the thermal conductivity of the adhesive.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Thermal properties of materials · Brake Systems and Friction Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. In-situ formation of SiC, ZrB2-SiC and ZrB2-SiC-B4C-YAG coatings for high temperature oxidation protection of C/C composites10.1016/j.corsci.2018.07.002 ↗
2. Structural transformation of carbon/carbon composites for aircraft brake pairs in the braking process10.1016/j.triboint.2016.06.018 ↗
3. Preparation and characterization of carbon/carbon aircraft brake materials with long service life and good frictional properties
4. The effect of high-temperature heat-treatment on the strength of C/C–SiC joints10.1016/j.carbon.2010.04.030 ↗
5. Direct joining of 2D carbon/carbon composites to Ti-6Al-4V alloy with a rectangular wave interface10.1016/j.msea.2007.11.013 ↗
6. Microstructure and gas-surface interaction studies of a 3D carbon/carbon composite in atmospheric entry plasma10.1016/j.carbon.2016.11.054 ↗
7. In-Situ synthesized TiC nano-flakes reinforced C/C composite-Nb brazed joint
8. Mechanical property and failure mechanism of 3D Carbon-Carbon braided composites bolted joints under unidirectional tensile loading10.1016/j.matdes.2014.08.073 ↗
9. A novel approach to brazing C/C composite to Ni-based superalloy using alumina interlayer10.1016/j.jeurceramsoc.2011.12.016 ↗
10. Effects of carbon fiber orientation and graphitization on solid state bonding of C/C composite to nickel10.2320/matertrans.44.148 ↗
11. Effect of temperature and layer thickness on these strengths of carbon bonding for carbon/carbon composites10.1016/j.carbon.2004.09.002 ↗
12. Effect of the evolution of phenol-formaldehyde resin on the high-temperature bonding10.1016/j.ijadhadh.2009.03.001 ↗
13. Joining of surface modified carbon/carbon composites using a barium-aluminum-boro-silicate glass10.1016/S0955-2219(97)00203-3 ↗
14. Characterization of adhesive bonded lap joints of C/C-SiC composite and Ti-6Al-4V alloy under varying conditions10.1016/S0143-7496(02)00082-9 ↗
15. Three-dimensional interconnected graphene microsphere as fillers for enhancing thermal conductivity of polymer10.1016/j.cej.2019.02.110 ↗
16. Application of graphene as filler to improve thermal transport property of epoxy resin for thermal interface materials10.1016/j.ijheatmasstransfer.2015.01.141 ↗
17. Mechanical reinforcement and thermal conductivity in expanded graphene nanoplatelets reinforced epoxy composites10.1016/j.cplett.2012.02.006 ↗
18. Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites10.1007/s10853-014-8665-6 ↗
19. Friction performance of C/C composites prepared using rapid directional diffused chemical vapor infiltration processes10.1016/S0008-6223(01)00283-4 ↗
20. Thermal conductivity measurements of suspended graphene with and without wrinkles by micro-Raman mapping10.1088/0957-4484/23/36/365701 ↗
21. Effect OF friction PARAMETER,AMBIENT,SURFACE status ON tribological behavior OF carbon-carbon composites