A novel heat-resistant organic matrix adhesive for hydrophobic silica aerogels composites and 1Cr18Ni9Ti steel bonding
Source abstract
Abstract
Abstract The novel organic matrix adhesive was used to join hydrophobic mullite fiber reinforced silica aerogels (HMF/SA) composites and 1Cr18Ni9Ti steel. It was prepared using silicone resin (SR) as a matrix, Al, low melting point glass (GP), ZnO and Fe2O3 powders as inorganic fillers, γ-aminopropyltriethoxysilane (γ-APS) as curing agent and dibutyltin dilaurate (DBTDL) as catalyst. The curing mechanism and character of the adhesive were studied, as well as the bonding mechanism of the adhesive. The tensile shear strength of the adhesive was investigated after heat-resistant experiment in atmosphere surroundings. Results showed that the adhesive could be cured at room temperature through polycondensation reaction using γ-APS. The adhesive had a good wettability with HMF/SA composites and 1Cr18Ni9Ti steel, and established strong adhesion between both of them. The adhesive could be resistant to 750 °C with satisfactory bonding strength (4.68 MPa). The optimized ratio of inorganic fillers had important influences on the bonding properties of the adhesive. Al took an important effect in giving a strong refractory ceramic bond to the adherends. Failure mode of joint was substrate failure due to the high chemical bonding force between the adherends.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Silicone and Siloxane Chemistry · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Effective thermal conductivity of high temperature insulations for reusable launch vehicles
2. Preparation and characterization of silica aerogels from oil shale ash10.1016/j.matlet.2009.09.053 ↗
3. Preparation and characterization of CuSiO2 aerogel films10.1016/j.solidstatesciences.2011.06.002 ↗
4. Fields of Application of Aerogels (Review)10.1023/A:1024401803057 ↗
5. Aerogels-recent progress in production techniques and novel applications10.1023/A:1008663908431 ↗
6. Aerogel applications10.1016/S0022-3093(98)00135-5 ↗
7. Effect of the evolution of phenol-formaldehyde resin on the high-temperauture bonding10.1016/j.ijadhadh.2009.03.001 ↗
8. A review of adhesion science10.1016/j.dental.2009.11.157 ↗
9. Hydrophobic silica aerogels derived from polyethoxydisiloxane and perfluoroalkylsilane10.1016/j.msec.2006.06.032 ↗
10. Adsorption of toxic organic compounds from water with hydrophobic silica aerogels10.1016/j.jcis.2007.02.021 ↗
11. Surface free energy and wettability of silyl layers on silicon determined from contact angle hysteresis10.1016/j.cis.2005.01.005 ↗
12. Silicone sealants and structural adhesives10.1016/S0143-7496(01)00018-5 ↗
13. Parbhoo · 2002 · 677
14. The preparation and performance of a novel room-temperature-cured heat-resistant adhesive for ceramic bonding10.1016/j.msea.2010.11.091 ↗
15. Joining SiC ceramics with silicon resin YR318410.1016/j.ceramint.2009.05.025 ↗
16. Surface interactions of dentin adhesive materials
17. The science of adhesion, part 1: surface and interfacial aspects10.1007/BF00552302 ↗
18. Why silicones behave funny
19. Tailoring of interfaces in glass fiber reinforced polymer composites: a review10.1016/S0921-5093(00)01357-5 ↗
20. Ethyl silicate binders for high performance coatings10.1016/S0300-9440(01)00128-X ↗
21. Chloride-free biodegradable organic acid hydrolyzed zinc silicate coating10.1016/j.porgcoat.2011.09.002 ↗