The adhesive behavior of extracted latex polymers towards silicon oxide and cellulose
Source abstract
Abstract
The objective with this work is to compare the adhesive behavior for latex polymers of different glass transition temperatures ( T g ) at different length scales and with different contact times. This is accomplished by two techniques: AFM colloidal probe force measurements and JKR-measurements. The aim is to compare the results from these two techniques and relate them to the interaction of the latex polymers towards oxidized silicon wafers and silica/cellulose probes. Theory suggests that altering the short timeframes used in the colloidal probe technique does not affect the ranking of the adhesion for the different polymers, but for the macroscopic JKR-technique it influences the measured work of adhesion. It is therefore important to let the system reach a steady state before assuming complete spreading and adhesion. AFM and JKR measurements showed the same trends where the polymer with lowest content of styrene has the lowest T g and the highest adhesion, due to the larger polymer chain mobility.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Force Microscopy Techniques and Applications · Advanced Surface Polishing Techniques · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Review on the durability of exterior wood coatings with reduced VOC-content10.1016/S0300-9440(01)00170-9 ↗
2. Bergh · 1997 · vol. 1
3. Styrene-butadiene polymer action on compressive and tensile strengths of cement mortars10.1617/s11527-007-9324-z ↗
4. Cleenewerck MB. Update on medical and surgical gloves. Eur J Dermatol 20, 434–42.10.1684/ejd.2010.1000 ↗
5. Sperling · 2001
6. Kendall · 2001
7. Surface energy and the contact of elastic solids
8. Hertz · Journal für die reiner und angewandte Mathematik · 1882 · 92 · 156
9. Direct measurement of adhesion between viscoelastic polymers: a contact mechanical approach10.1122/1.550845 ↗
10. Characterization of adhesion at solid surfaces: development of an adhesion-testing device10.1016/j.eurpolymj.2005.06.008 ↗
11. Direct measurement of interfacial interactions between semispherical lenses and flat sheets of poly(dimethylsiloxane) and their chemical derivatives10.1021/la00053a033 ↗
12. Direct adhesive measurements between wood biopolymer model surfaces10.1021/bm300762e ↗
13. Atomic force microscope10.1103/PhysRevLett.56.930 ↗
14. Direct measurement of colloidal forces using an atomic force microscope10.1038/353239a0 ↗
15. Measurement of forces in liquids using a force microscopy10.1021/la00043a024 ↗
16. Extraordinary adhesion of phenylboronic acid derivatives of polyvinylamine to wet cellulose: a colloidal probe microscopy investigation10.1021/la900256s ↗
17. Interaction between silica in the presence of adsorbed poly(ethyleneimine): correlation between colloidal probe adhesion measurements and yield stress10.1039/c003973j ↗
18. Application of the JKR method to the measurement of adhesion to Langmuir–Blodgett cellulose surfaces10.1006/jcis.2000.7108 ↗
19. How to measure forces with atomic force microscopy without significant influence from nonlinear optical lever sensitivity10.1063/1.3194048 ↗
20. Normal and friction forces between mucin and mucin-chitosan layers in absence and presence of SDS10.1016/j.jcis.2008.04.055 ↗
21. Measurement of interfacial adhesion between glassy polymers using the JKR method10.1002/masy.19961020118 ↗
22. Formation of multilayers on silica surfaces of a cationic polyelectrolyte and dissolved and colloidal substances originating from mechanical wood pulp-adsorption and influence on adhesion10.1016/j.colsurfa.2004.01.029 ↗
23. Characterization of interfacial stress transfer ability of particulate cellulose composite materials10.1016/j.mechmat.2011.06.015 ↗
24. Effect of introduced charge in cellulose gels on surface interactions and the adsorption of highly charged cationic polyelectrolytes10.1039/b718543j ↗
25. Measurement of interaction forces between lignin and cellulose as a function of aqueous electrolyte solution conditions10.1021/la0618566 ↗
26. Direct measurement of attractive van der waals’ forces between regenerated cellulose surfaces in an aqueous environment10.1021/ja045992d ↗
27. Interaction forces between cellulose microspheres and ultrathin cellulose films monitored by colloidal probe microscopy—effect of wet strength agents10.1016/j.jcis.2004.08.047 ↗
28. Force measurements with the atomic force microscope: technique, interpretation and applications10.1016/j.surfrep.2005.08.003 ↗
29. Calibration of atomic-force microscope tips10.1063/1.1144449 ↗
30. Ultraflat templated polymer surfaces10.1021/la804191m ↗
31. Colloid probe characterization: radius and roughness determination10.1021/la001506y ↗
32. Kinetics of contact between smooth solids10.1080/00218467508078897 ↗
33. Latex coalescence10.1016/0143-7496(82)90082-3 ↗
34. Mechanics of axisymmetric wavy surface adhesion: JKR-DMT transition solution10.1016/j.ijsolstr.2008.10.013 ↗
35. Amontonian frictional behaviour of nanostructured surfaces10.1039/c0cp02657c ↗
36. The adhesive and durability of adhesive-poly(ethylene terephthalate) film joints10.1108/03699420910988787 ↗
37. Interactions between single latex particles and silica surfaces studied with AFM10.1016/j.colsurfa.2007.02.032 ↗