Revealing of interphases in bonded joints with a fiber optic sensor based on Fresnel reflection
Source abstract
Abstract
Abstract The interfacial zone between the polymer and the substrate is a particular area where physical or chemical bonds are established. It is important to understand the phenomenon occurring in this area, the literature highlights a possible under-crosslinking. Therefore, there is a polymerization gradient in the thickness of the adhesive joint that is called interphase. The aim of this study is to reveal this interphase by following the evolution of the polymerization rate. In general, this degree of crosslinking is determined by a differential scanning calorimetry (DSC) analysis. This study describes the steps of the kinetics of polymerization by measuring the refractive index of the adhesive. For that purpose, a fiber optic sensor based on Fresnel reflection is used. This sensor measures the evolution of the refractive index of the adhesive during the manufacturing process. To our knowledge, this is the only technique which allows in situ monitoring of the polymerization rate in a non-destructive manner. It is then possible to conclude on the presence, or absence of a polymerization gradient in the thickness of the bonded joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Synthesis and properties of polymers · Nanofabrication and Lithography Techniques · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Mechanism and kinetics of epoxy–amine cure studied by differential scanning calorimetry10.1021/ma951162w ↗
2. Diffusion of water into an epoxy adhesive: comparison between bulk behavior and adhesive joints10.1016/0143-7496(95)91624-F ↗
3. Weak boundary layers10.1021/ie51403a010 ↗
4. The modification of epoxy/metal interphases by adsorbed contaminants10.1080/00218469208026530 ↗
5. Failure mode and ageing of steel epoxy joints10.1016/S0169-4332(98)00220-7 ↗
6. Interfacial chemistry of epoxy-modified poly (vinyl chloride) adhesive on cold-rolled and galvanized steels
7. Formation of epoxy-diamine/metal interphases10.1016/S0143-7496(02)00021-0 ↗
8. Formation of a metal/epoxy resin interface10.1016/j.apsusc.2004.05.239 ↗
9. Formation and structure of epoxy network interphases at the contact to native metal surfaces10.1016/j.crci.2005.04.009 ↗
10. Rate equations in the study of the DSC kinetics of epoxy-amine reactions in an excess of epoxy10.1016/j.tca.2008.08.012 ↗
11. Epoxy-amine/metal interphases: influences from sharp needle-like crystal formation10.1016/j.ijadhadh.2006.09.009 ↗
12. Quantitative control of RTM6 epoxy resin polymerisation by optical index determination10.1016/j.compscitech.2007.04.008 ↗
13. Optoelectronic sensor for cure monitoring in thermoset-based composites10.1016/S0924-4247(00)00361-7 ↗
14. Glass transition temperature versus conversion relationships for thermosetting polymers10.1002/polb.1990.090280107 ↗
15. Applications of FTIR on epoxy resins – Identification, monitoring the curing process, phase separation and water uptake10.5772/36323 ↗
16. Magnetic and electric resonances in particle-to-film-coupled functional nanostructures10.1021/acsami.7b16941 ↗
17. Born · 1999
18. Effect of interphase region on the elastic behavior of unidirectional glass-fiber/epoxy composites10.1016/j.compstruct.2018.05.039 ↗
19. Refractive Indices of Rutile and Sphalerite10.1364/JOSA.41.000416 ↗
20. Kramers-Kronig analysis of reflectance data for diamond10.1103/PhysRev.136.A1445 ↗