Evaluation of hot-pressing scarf joints between polyamide 6,6 (PA66) composite and AA5754-H111 under tensile and flexural loading
Source abstract
Abstract
As a direct bonding method, hot pressing connection offers versatility for manufacturing high quality multi-material structures. This experimental study focuses on the hot-press bonding of short-glass-fiber reinforced PA66 and Al5754 alloy. Laser surface structuring with grid pattern is performed on the metallic adherend to enhance the bonding strength and the scarfing ratio of 1:4 is analyzed for the dissimilar joint. Contact angle measurements and X-ray photoelectron spectroscopy (XPS) are used to evaluate the surface modification. Mechanical performance of the joints is studied in terms of the tensile-shear and flexural properties. Morphology of the fracture surfaces is scrutinized through a scanning electron microscopy (SEM). According to the results, it is found that the laser ablation treatment significantly affects the surface of the metallic adherend and subsequent joint strength. The scarf adhesiveless joint shows a mixed fracture with a negligible elastic deformation under tensile-shear loading. Furthermore, the joint performs better under the bending load from the metallic adherend.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Quality assessment and structural health monitoring of CNT reinforced CFRP and Ti6Al4V multi-material joints10.1016/j.matdes.2021.110118 ↗
2. On quasi-static behaviors of different joint methods for connecting carbon fiber reinforce plastic (CFRP) laminate and aluminum alloy10.1016/j.tws.2021.107657 ↗
3. Fracture and dynamic mechanical analysis of seawater aged aluminum-BFRP hybrid adhesive joints10.1016/j.engfracmech.2022.108507 ↗
4. Laser joining technology of polymer-metal hybrid structures - a review10.1016/j.jmapro.2022.05.026 ↗
5. Improving appearance and mechanical strength of aluminum-polypropylene/talc composite friction stir joint using a novel tool design10.1007/s00170-022-09581-7 ↗
6. Innovative acrylic thermoplastic composites versus conventional composites: improving the impact performances10.1016/j.compstruct.2019.02.090 ↗
7. A review on direct assembly of through-the-thickness reinforced metal–polymer composite hybrid structures10.1002/pen.25022 ↗
8. Effect of surface topography on mechanical properties of steel-polycarbonate joints by laser direct joining10.1007/s40194-022-01344-y ↗
9. Reinforcing an aluminum/GFRP co-cured single lap joint using inter-adherend fiber10.1016/j.compositesa.2008.02.002 ↗
10. Optimization of microstructural morphology via laser processing to enhance the bond strength of Al-CFRP
11. Effect of the interfacial nanostructure on the interlaminar fracture toughness and damage mechanisms of directly bonded carbon fiber reinforced thermoplastics and aluminum10.1016/j.compositesa.2020.106101 ↗
12. Friction stir spot welding of 5052 aluminum alloy to carbon fiber reinforced polyether ether ketone composites10.1016/j.matdes.2021.109495 ↗
13. Laser direct joining of CFRTP and aluminium alloy with a hybrid surface pre-treating method10.1016/j.compositesb.2019.106911 ↗
14. Influence of processing parameters on joint shear performance in laser direct joining of CFRTP and aluminum alloy10.1016/j.matdes.2021.109996 ↗
15. A study on the bond strength of plastic–metal direct bonds using friction press joining10.3390/met11040660 ↗
16. Influence of different micro-pattern types on interface characteristic and mechanical property of CFRTP/aluminum alloy laser bonding joint10.1007/s00170-022-08748-6 ↗
17. Enhancing the solid-state joinability of A5052 and CFRTP via an additively manufactured micro-structure10.1016/j.jmatprotec.2022.117629 ↗
18. Effect of long-term stress aging on aluminum-BFRP hybrid adhesive joint's mechanical performance: static and dynamic loading scenarios10.1002/pc.26828 ↗
19. Experimental and numerical failure analyses of dissimilar material joints between aluminium and thermoplastic10.1016/j.compstruct.2020.112762 ↗
20. Evaluation of aluminum to composite bonded lap joints10.1177/09540083221111443 ↗
21. Effect of laser spot overlap ratio on surface characteristics and adhesive bonding strength of an Al alloy processed by nanosecond pulsed laser10.1016/j.jmapro.2020.12.055 ↗
22. Experimental and theoretical studies on laser treatment strategies for improving shear bonding strength of structural adhesive joints with cast aluminum10.1016/j.compstruct.2021.114831 ↗
23. Performance improvements of a short glass fiber-reinforced PA66 composite10.1515/secm-2021-0045 ↗
24. Enhancing the fracture toughness of glass fiber reinforced polyamide 6,6 composites with the addition of chain extender10.1002/pc.23803 ↗
25. Investigation into fibre orientation and weldline reduction of injection moulded short glass-fibre/polyamide 6-6 automotive components10.1177/0892705719833098 ↗
26. On the role of the spherulitic microstructure in fatigue damage of pure polymer and glass-fiber reinforced semi-crystalline polyamide 6.610.1016/j.ijfatigue.2019.04.036 ↗
27. Effect of the process parameters on the adhesive strength of dissimilar polymers obtained by multicomponent injection molding10.3390/polym13071039 ↗
28. Experimental and numerical simulation study on impact response of TC4/PEEK/Cf laminates under different mass impactors10.1016/j.compstruct.2020.113197 ↗
29. ASTM D5868-01(2014). Standard test method for lap shear adhesion for fiber reinforced plastic (FRP) bonding..
30. Effect of surface texture on the adhesion performance of laser treated Ti6Al4V alloy10.1080/00218464.2014.933809 ↗
31. Application of pulsed Yb: fiber laser to surface treatment of Al alloys for improved adhesive bonded performance10.1016/j.optlaseng.2019.03.017 ↗
32. Achieving strong friction lap joints of carbon-fiber reinforced plastic and metals by modifying metal surface structure via laser-processing pretreatment10.1016/j.compstruct.2020.112167 ↗
33. On formation of Al-O-C bonds at aluminum/polyamide joint interface10.1016/j.apsusc.2018.10.024 ↗
34. A State-of-the-art review on advanced joining processes for metal-composite and metal-polymer hybrid structures10.3390/ma14081890 ↗
35. Superhydrophilicity to superhydrophobicity transition of picosecond laser microstructured aluminum in ambient air10.1016/j.jcis.2014.11.015 ↗
36. Evaluation of surface treatments on 5052-H32 aluminum alloy for enhancing the interfacial adhesion of thermoplastic-based fiber metal laminates10.1016/j.ijadhadh.2018.01.003 ↗
37. Binding mechanisms between laser-welded polyamide-6.6 and native aluminum oxide10.1021/acsomega.1c04264 ↗
38. Surface modification of sintered magnesium oxide (MgO) with chromium oxide (Cr2O3) by pulsed laser irradiation in air and liquids10.1016/j.ceramint.2021.04.175 ↗
39. Effects of irradiation energy and nanoparticle concentrations on the structure and morphology of laser sintered magnesia with alumina and iron oxide nanoparticles10.1016/j.ceramint.2019.12.004 ↗
40. Effect of laser ablation surface treatment on performance of adhesive-bonded aluminum alloys10.1016/j.surfcoat.2016.04.051 ↗
41. The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints10.1016/j.engstruct.2020.111322 ↗