Optimization of inductive fast-curing of epoxy adhesive by model-based kinetics
Source abstract
Abstract
Adhesively bonded joints must be fixed until a necessary degree of cure is reached. This is done by hybrid joining processes or fixing methods that hold the bonded parts in position. Inductive fast-curing can enable time-efficient processes without additional joining methods, but the complexity of the process and the variety of influencing factors make it challenging to develop. In this work, a new approach to the design of fast-curing processes is pursued, which, in addition to classical temperature measurements, relies on real-time simulation of the curing degree, providing direct feedback on the quality of the induction parameters set. DSC measurements were performed on a single-component epoxy adhesive , which were used to develop kinetics models according to model-free and model-based methods. Fast curing tests show the dependence of initial strength on temperature and degree of conversion , with a comparison of experimentally and numerically determined degrees of conversion revealing high agreement. The demonstrated suitability of the kinetics model allowed fast-curing processes to be optimized using a developed tool for real-time conversion degree determination, such that a high initial strength was achieved even with different joining part materials. FEM simulations also reveal the effect of temperature gradients due to uneven heating, which leads to conversion gradients in the adhesive layer that must be avoided.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Thermal and Kinetic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Menzel · 2011
2. Eichleiter · 2011
3. Rudnev · 2017
4. Schmale · 2009
5. Girolstein · 2012
6. Knöner · 2007
7. Frauenhofer · 2010
8. Simulation of the cure of paste adhesives by induction heating10.1177/0021998313487933 ↗
9. Paste adhesive modification for induction curing
10. Methodology for optimization of the curing cycle of paste adhesives10.1016/j.ijadhadh.2012.09.002 ↗
11. Nagel · 2003
12. Kinetics and thermal characterization of thermoset cure10.1002/pen.760130110 ↗
13. Differential scanning calorimetry of epoxy cure: isothermal cure kinetics10.1016/0040-6031(76)80056-1 ↗
14. Initial kinetic parameters for the model-based kinetic method
15. Approaches on the non-isothermal curing kinetics of epoxy/PCL blends10.1016/j.jmrt.2020.09.081 ↗
16. Viscoelastic model to capture residual stresses in heat cured dissimilar adhesive bonded joints10.1016/j.ijadhadh.2021.102844 ↗
17. Accurate cure modeling for isothermal processing of fast curing epoxy resins10.3390/polym8110390 ↗
18. Analyzing the network formation and curing kinetics of epoxy resins by in situ near-infrared measurements with variable heating rates10.1016/j.tca.2015.08.008 ↗
19. Kinetic methods to study isothermal and nonisothermal epoxy-anhydride cure10.1002/(SICI)1521-3935(19991001)200:10<2294::AID-MACP2294>3.0.CO;2-V ↗
20. Model-free kinetics10.1007/s10973-005-7044-6 ↗
21. Kinetics of thermal degradation of char-forming plastics from thermogravimetry. Application to a phenolic plastic10.1002/polc.5070060121 ↗
22. Cure kinetics modeling of a high glass transition temperature epoxy molding compound (EMC) based on inline dielectric analysis10.3390/polym13111734 ↗
23. Determination of kinetic mechanisms for reactions measured with thermoanalytical instruments10.1007/s10973-012-2406-3 ↗
24. Model-free analysis of thermoanalytical data-advantages and limitations10.1016/S0040-6031(02)00169-7 ↗
25. Cure history dependent viscoelastic modeling of adhesively bonded joints using MAT_277 in LS-DYNA
26. Ditter · 2019
27. Hernández-Ortiz · 2012
28. Hosseinpour · 2016
29. Vallée · 2020
30. Lion · 2014
31. Optimization of a commercial epoxy curing cycle via DSC data kinetics modelling and TTT plot construction10.1016/j.polymer.2021.124091 ↗
32. Collision, co-ordination, diffusion and reaction velocity in condensed systems10.1039/tf9373301225 ↗
33. FE simulation of the curing behavior of the epoxy adhesive Hysol EA-932110.1016/j.ijadhadh.2015.03.005 ↗
34. Investigation of epoxide curing reactions by differential scanning calorimetry - formal kinetic evaluation10.1002/1439-2054(20010301)286:3<143::AID-MAME143>3.0.CO;2-Z ↗
35. Glass transition temperature versus conversion relationships for thermosetting polymers10.1002/polb.1990.090280107 ↗
36. Boehm · 2015
37. Cure behavior of an epoxy–novolac molding compound10.1002/app.1992.070440118 ↗
38. Prediction of the glass transition temperature of polymers: a model based on the principle of corresponding states10.1002/polb.1987.090250914 ↗
39. Comparison of isothermal predictions based on model-free and model-based kinetic methods10.1520/JTE20140145 ↗
40. Curing kinetics and chemorheological analysis of polyurethane formation10.1002/pen.20046 ↗
41. Kinetic study of the novolac resin curing process using model fitting and model-free methods10.1016/j.tca.2011.04.033 ↗
42. Modeling of curing adhesives between jointed steel and aluminium plates using MAT_277 in LS-DYNA
43. Sánchez Cebrián · 2014
44. Multistep heating to optimize the curing process of a paste adhesive
45. Bestimmung der Aushärtekinetik eines 2-stufig aushärtenden Epoxidharzes zur Herstellung von Hochleistungsfaserverbunden10.3139/O999.03022016 ↗