Reusability of decal substrates for the fabrication of catalyst coated membranes
Source abstract
Abstract
The use of decal substrates to produce catalyst coated membranes (CCMs) for polymer electrolyte membrane water electrolyzers or fuel cells is a common procedure. For economic and ecological reasons, the reuse of decal substrates would be desirable. Thus far, it has not been investigated whether reuse is possible. Therefore, this study focuses on the repeated coating and transfer in decal processes and investigates changes in substrate properties. After coating Kapton and PTFE with a Carbon-Nafion dispersion, the dry layer was transferred onto a Nafion membrane. This procedure was repeated 50 times. The change in substrate thickness and surface free energy (SFE), as well as the transfer rate (TR), were monitored. The residues on the substrate and scattering of the TR were higher for Kapton compared to PTFE. None of the decal substrates changed its SFE and thickness within the measurement uncertainties. Because of the smaller scattering in the TR, PTFE is more suitable for reuse.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
2. Optimization of catalyst ink composition for the preparation of a membrane electrode assembly in a proton exchange membrane fuel cell using the decal transfer10.1016/j.ijhydene.2012.09.013 ↗
3. Highly active screen-printed IrTi4O7 anodes for proton exchange membrane electrolyzers10.1016/j.ijhydene.2018.02.179 ↗
4. Fabrication and performance test of a catalyst-coated membrane from direct spray deposition10.1016/j.ssi.2008.01.081 ↗
5. Effect of MEA fabrication techniques on the cell performance of Pt–Pd/C electrocatalyst for oxygen reduction in PEM fuel cell10.1016/j.fuel.2010.07.008 ↗
6. An efficient decal transfer method using a roll-press to fabricate membrane electrode assemblies for direct methanol fuel cells10.1016/j.ijhydene.2012.09.045 ↗
7. Parametric investigation of a high-yield decal technique to fabricate membrane electrode assemblies for direct methanol fuel cells10.1016/j.ijhydene.2013.07.043 ↗
8. A comparative study of CCM and hot-pressed MEAs for PEM fuel cells10.1016/j.jpowsour.2007.03.062 ↗
9. Gutoff · 2006
10. Swelling agent adopted decal transfer method for membrane electrode assembly fabrication10.1016/j.jpowsour.2014.02.037 ↗
11. Ionomer segregation in composite MEAs and its effect on polymer electrolyte fuel cell performance10.1149/1.1756887 ↗
12. Homogeneity analysis of square meter-sized electrodes for PEM electrolysis and PEM fuel cells
13. Contact angle, wetting, and adhesion: a critical review10.1163/156856192X00629 ↗
14. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
15. Impact of reference values used for surface free energy determination: an uncertainty analysis10.1016/j.ijadhadh.2017.12.002 ↗
16. Chapter 1 - non-Newtonian fluid behaviour