Influence of adverse temperature and moisture conditions on the fracture behaviour of single-strap repairs of carbon-epoxy laminates
Source abstract
Abstract
Abstract The influence of temperature and moisture on the fracture properties of carbon-epoxy bonded joints was studied in this work. Four temperatures and three moisture adverse environments were considered and compared with reference conditions. Fracture characterisation under mode I, mode II and mixed-mode I+II was performed to assess the influence of the adverse conditions on the measured properties. Subsequently, single-strap bonded repairs under three-point bending loading were also analysed under the same environments. Initial stiffness, maximum load and corresponding displacement were the parameters studied. A trapezoidal cohesive mixed-mode I + II zone model was used to predict the mechanical behaviour of the single-strap repairs under the several adverse conditions. The resulting numerical load-displacement curves were compared with the experimental ones.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Some effects of moisture on adhesive-bonded CFRP-CFRP joints10.1016/0263-8223(86)90073-5 ↗
2. The effect of temperature on the strength of adhesive joints10.1016/0143-7496(92)90052-W ↗
3. Effect of temperature on shear strength of adhesively bonded joints for automobile industry
4. Predicting the residual strenght for environmentally degraded adhesive lap joints10.1016/j.ijadhadh.2005.04.003 ↗
5. Durability of bonded FRP-to-steel joints: effects of moisture, de-icing salt solution, temperature and FRP type10.1016/j.compositesb.2017.03.049 ↗
6. The mechanical behaviour of adhesively bonded composite joints under repeated axial impacts at different temperatures10.1515/secm-2015-0509 ↗
7. Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests10.1007/s40430-017-0959-6 ↗
8. An investigation of hygrothermal effects on adhesive materials and double lap shear joints of CFRP composite laminates10.1016/j.compositesb.2016.01.051 ↗
9. Fernando · 1996 · vol. 16 · 113
10. The strength prediction of adhesive single lap joints exposed to long term loading in a hostile environment10.1016/j.ijadhadh.2014.06.013 ↗
11. Mode I fracture toughness of an adhesively bonded composite-composite joint in a cryogenic environment10.1016/j.compscitech.2006.08.026 ↗
12. Effect of temperature on pure modes I and II fracture behavior of composite bonded joints10.1016/j.compositesb.2016.04.022 ↗
13. Effect of moisture on pure mode I and II fracture behaviour of composite bonded joints10.1016/j.ijadhadh.2016.01.010 ↗
14. Fracture toughness and shear behaviour of composite bonded joints based on a novel aerospace adhesive10.1016/j.compositesb.2011.07.010 ↗
15. Modelling the environmental degradation of adhesively bonded aluminum and composite joints using a CZM approach10.1016/j.ijadhadh.2006.09.015 ↗
16. Pure mode II fracture characterization of composite bonded joints10.1016/j.ijsolstr.2008.12.001 ↗
17. Relative humidity-temperature relationships of some saturated salt solutions in the temperature range 0 degree to 50 degrees C10.6028/jres.053.003 ↗
18. A new data reduction scheme for mode I wood fracture characterization using the double cantilever beam test10.1016/j.engfracmech.2008.02.006 ↗
19. Application of the end loaded split and single-leg bending tests to the mixed-mode fracture characterization of wood10.1515/HF.2009.088 ↗
20. Beam and finite element analysis of quasi-unidirectional composite SLB and ELS specimens10.1016/j.compscitech.2004.05.002 ↗
21. Mixed-mode I+II fracture characterization of a hybrid carbon-epoxy/cork laminate using the single-leg bending test10.1016/j.compscitech.2017.01.001 ↗