Effects of a borosiloxane oligomer on the properties of anaerobic adhesive
Source abstract
Abstract
Abstract To improve the heat-resistance of anaerobic adhesives, a borosiloxane oligomer (BSi) was directly synthesized by the co-condensation of boric acid with phenyl triethoxysilane without any external addition of water, catalyst or solvent. The BSi-modified anaerobic adhesive based on ethoxylated bisphenol A dimethacrylate was prepared. The above-prepared BSi was characterized by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The effects of BSi modification on the bonding strength of the anaerobic adhesives were investigated using dynamic mechanical analysis (DMA), TGA, scanning electron microscopy (SEM), FTIR and strength testing. The curing behavior was evaluated using differential scanning calorimetry (DSC) analysis. The results showed that the BSi-modified anaerobic adhesive exhibited an increase in the bonding strength at room temperature. The bonding strength decreased as the testing temperature increased. However, the BSi polyblended adhesive showed a significant enhancement in the bonding strength at 400 °C because of the further formation of a Si-O-B crosslinked structure. BSi can be used as a potential heat-resistant additive that is available for threadlocking and retaining applications at 400 °C; in addition, the curing reaction of anaerobic adhesives can be promoted using BSi.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Flame retardant materials and properties · Silicone and Siloxane Chemistry · Carbon dioxide utilization in catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Anaerobic adhesive cure mechanism-I10.1080/00218469008030406 ↗
2. The behaviour of high-temperature anaerobic adhesives10.1016/0143-7496(92)90055-Z ↗
3. Chu · 1997
4. Rossi · 1987
5. Rossi · 1989
6. Malofsky · 1976
7. Attarwala · 2000
8. Attarwala S, Mazzella G, Chu HK, Luong D, Bennington L, Konarski M., et al., High temperature, controlled strength anaerobic adhesive compositions curable under ambient environmental conditions, Henkel Loctite Corporation (1001 Trout Brook Crossing, Rocky Hill, CT 06067, US); 2007.
9. Simple green synthesis of polyborosiloxanes as environmentally-safe, non-halogenated flame retardant polymers10.1039/c0gc00376j ↗
10. Preparation and characterization of polyborosiloxanes and their blends with phenolic resin as shapeable ceramic precursors10.1007/s10118-014-1393-1 ↗
11. Preparation and characterization of UV-curable, boron-containing, transparent hybrid coatings10.1002/app.33358 ↗
12. Biocatalytic synthesis of novel polyborosiloxane copolymers for flame retardiant applications
13. Novel poly(borosiloxane) precursors to amorphous SiBCO ceramics10.1016/j.matchemphys.2008.07.041 ↗
14. Zhu Bizhong (Midland MI., US), Borosiloxane composition, borosiloxane adhesive, coated and laminated substrates, United States; 2010.
15. Preparation and properties of borosiloxane gels10.1002/app.21974 ↗
16. Organically modified SiO2−B2O3 Gels displaying a high content of borosiloxane (B−O−Si⋮) bonds10.1021/cm980353l ↗
17. Solid state 29Si and 11B NMR studies of sol-gel derived borosilicates10.1016/0022-3093(88)90160-3 ↗
18. Preparation and properties of polyborosiloxanes as precursors for borosilicate formation of SiO2–B2O3 gel fibers and oxides by the sol-gel method using tetraacetoxysilane and boron tri-n-butoxide10.1002/pola.1994.080320606 ↗
19. Spectroscopic investigations of borosiloxane bond formation in the sol-gel process10.1016/S0022-3093(87)80332-0 ↗
20. A spectroscopic study of an anhydrous tetraethyl orthosilicate-boric acid-ethanol system10.1023/A:1008663624419 ↗
21. Preparation and spectroscopy of anhydrous borosilicate sols and their application to thin films10.1016/S0022-3093(98)00778-9 ↗
22. Hybrid RSiO1.5/B2O3 gels from modified silicon alkoxides and boric acid10.1023/A:1008733511697 ↗
23. Poly(borosiloxanes) as precursors for carbon fiber ceramic matrix composites10.1590/S1516-14392007000200009 ↗
24. Synthesis, characterization and thermal properties of boron and silicon containing preceramic oligomers10.1023/A:1016004522824 ↗
25. Kobayashi Hiroshi (Fuji JP.), Polyborodiphenylsiloxanes, Asahi Kasei Kogyo Kabushiki Kaisha (Osaka, JP), United States; 1980.
26. New facile process for synthesis of borosiloxane resins10.1007/s10904-014-0094-0 ↗
27. Synthesis, characterization and ceramic conversion studies of borosiloxane oligomers from phenyltrialkoxysilanes10.1007/s10904-010-9380-7 ↗
28. Pyrolysis of a polyborodiphenylsiloxane10.1038/266521a0 ↗
29. Surface modification of boron fibres for improved strength in composite materials10.1163/1568561054929928 ↗
30. Silane surface modification of boron carbide in epoxy composites10.1016/j.ijadhadh.2013.05.014 ↗
31. Sol–gel preparation of borosilicates10.1016/S0022-3093(98)00821-7 ↗
32. Boron oxide production kinetics using boric acid as raw material10.1021/ie300685x ↗
33. On the degradation and stabilization of poly(methyl methacrylate) in a continuous process10.1002/ceat.200390092 ↗
34. Studies of mixed silica/alumina and silica/boric oxide materials10.1007/BF00486216 ↗
35. Characterization of B2O3-SiO2 glasses prepared via sol-gel10.1007/BF01111904 ↗
36. Reduction in fixture time of a two-component structural acrylic adhesive10.1016/j.ijadhadh.2007.09.001 ↗
37. Smith · 2000 · 187
38. Anaerobic adhesive cure mechanism-II10.1080/00218469008030407 ↗