High-frequency welding of glass-fiber-reinforced polypropylene with a thermoplastic adhesive layer including SiC
Source abstract
Abstract
Abstract In this study, high-frequency (HF) welding of glass-fiber-reinforced polypropylene (GF/PP) was investigated with thermoplastic adhesive layers including SiC, which is able to heat by HF irradiation. The influences of SiC particle size and content on the dielectric properties of an adhesive layer were investigated experimentally. The influence of temperature on the tan δ / e ′ value was also investigated. In the HF welding process of GF/PP bonded with the thermoplastic adhesive layer, the effects of SiC content and particle size on the welding properties were examined. The GF/PP was completely welded in a short time when SiC with small particle size and high content was included in the adhesive and a good bond strength was also achieved. Thus, short time and high bond strength for the welding were achieved with the method using a thermoplastic adhesive layer with high tan δ / e ′ value.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Tribology and Wear Analysis · Synthesis and properties of polymers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Investigation and demonstration of the durability of air plasma pre-treatment on polypropylene automotive bumpers10.1016/j.ijadhadh.2004.04.001 ↗
2. Ultrasonic plastic welding using fundamental and higher resonance frequencies10.1016/S0041-624X(02)00125-7 ↗
3. Welding characteristics of 27, 40 and 67kHz ultrasonic plastic welding systems using fundamental- and higher-resonance frequencies10.1016/j.ultras.2004.02.009 ↗
4. Welding of thermoplastics by ultrasound10.1016/0041-624X(76)90020-2 ↗
5. Effects of calcium carbonate, talc, mica, and glass-fiber fillers on the ultrasonic weld strength of polypropylene10.1002/app.21102 ↗
6. Mechanical properties of vibration welded short- and long-glass-fiber-reinforced polypropylene10.1016/j.compositesa.2008.03.013 ↗
7. Vibration welding of a unidirectional continuous glass fiber reinforced polypropylene GMT10.1016/j.compositesa.2005.03.024 ↗
8. Vibration welding air intake manifolds from reinforced nylon 66, nylon 6 and polypropylene10.1016/j.compositesa.2004.02.019 ↗
9. Vibration welding of alpha and beta isotactic polypropylenes: Mechanical properties and structure10.3144/expresspolymlett.2008.20 ↗
10. Laser diode transmission welding of polypropylene: geometrical and microstructure characterisation of weld10.1016/j.matdes.2008.10.027 ↗
11. High-speed laser welding of plastic films10.1016/S0143-8166(00)00071-3 ↗
12. Study on resistance welding of glass fiber reinforced thermoplastic composites10.1016/j.matdes.2012.05.025 ↗
13. Shear strength and meltdown behavior of reinforced polypropylene assemblies made by resistance welding10.1016/j.compositesa.2008.09.019 ↗
14. Microwave welding of thermoplastics using inherently conducting polymers10.1016/0032-3861(93)90641-M ↗
15. Microwave welding of thermoplastics10.1023/A:1012993113748 ↗
16. Bonding adhesive joints with radio-frequency dielectric heating10.1016/0143-7496(91)90007-5 ↗
17. Troughton · 2009 · 57
18. High-frequency welding of polypropylene using dielectric ceramic compounds in composite adhesive layers10.1016/j.ijadhadh.2013.09.019 ↗
19. Development of high-K inorganic/organic composite material for embedded capacitors10.5104/jiep.8.573 ↗
20. High dielectric constant insulation sheet for PWBs with embedded capacitors
21. Nielsen · 1978 · 73
22. Effect of particle size on structure and dielectric properties of 0–3 PMN/EP composite
23. Resistance welding of thermoplastic composite-an overview10.1016/j.compositesa.2004.06.030 ↗
24. An experimental study of resistance welding of carbon fiber fabric reinforced polyetherimide (CF fabric/PEI) composite material10.1023/A:1008879402267 ↗
25. Influence of adhesive thickness and filler content on the mechanical performance of aluminium single-lap joints bonded with aluminium powder filled epoxy adhesive10.1016/j.jmatprotec.2007.11.121 ↗
26. Effect of adhesive type and thickness on the lap shear strength10.1080/00218460600948511 ↗
27. Structural design of single lap joints with delaminated FRP composite adherends10.1016/j.compositesb.2013.03.039 ↗
28. Techniques to reduce the peel stress in adhesive joints with composites10.1016/j.ijadhadh.2006.04.001 ↗
29. Through-the-width delamination damage propagation characteristics in single-lap laminated FRP composite joints10.1016/j.ijadhadh.2008.03.001 ↗