Adhesion of a novel flexible epoxy molding compound and its molecular dynamics simulation
Source abstract
Abstract
Abstract To improve the flexibility and adhesion of epoxy molding compound (EMC), a flexibilizer named 1,3-propanediol bis (4-aminobenzoate) (PBA) was added in an EMC product to prepare a flexible EMC. Because of PBA in EMC, the reduction of storage modulus and lowered glass transition temperatures would be very great helpful to reduce thermal stress build-up during high temperature soldering process. With the increase of PBA, the variation trends of tab pull force of copper and silver plated lead frame within EMC increased accordingly, the increments were up to 58% and 117%, respectively. From the molecular dynamics simulation on interfacial bonding energies between EMC and lead frames, the interfacial bonding energy was 2.09 J m −2 and 1.89 J m −2 for epoxy molecules with Cu 2 O and Ag 2 O, respectively, that meant the interfacial bonding energy of copper plated lead frame within EMC was greater than silver plated lead frame within EMC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Synthesis and properties of polymers · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Lu · 2008
2. New profile of ultra low stress resin encapsulants for large chip semiconductor devices10.1109/TCHMT.1987.1134798 ↗
3. High-temperature, low modulus adhesive attach for large-area thin film processing on silicon and alumina tiles10.1109/6104.816096 ↗
4. Reduced thermal strain in flip chip assembly on organic substrate using low CTE anisotropic conductive film10.1109/6104.873244 ↗
5. Low stress epoxy molding compounds for VLSI devices
6. Low-stress resin encapsulants for semiconductor devices10.1109/TCHMT.1985.1136527 ↗
7. Shoraka F, Kinsman K, Nataraja B, Cealer C Package and molding compound mechanics. In: Proceedings of the sixth annual international electronic packaging conference, 1986.
8. Use of glycidyl methacrylate monomers for developing cross-linkable pressure sensitive adhesives10.1016/S0014-3057(00)00003-3 ↗
9. Phenylethynyl terminated oligoimides derived from 3,3,4,4-diphenylsulfonetetracarboxylic dianhydride and their adhesive properties10.1016/j.eurpolymj.2009.01.004 ↗
10. Curing kinetics and properties of epoxy resin-fluorenyl diamine systems10.1016/j.polymer.2008.08.004 ↗
11. Chun'e Fu, Si Chen, Pär Berggren, Qiong Fan Wenhui Du, Optimization of stiffness for conductive materials. In: APM 10. International symposium on advanced packaging materials: microtechnology, Cambridge; 2010.10.1109/ISAPM.2010.5441385 ↗
12. Xinyu Du, Guangchao Xie, Wei Tan, Suqiong Qin, Xingming Cheng, Stress reduction of epoxy molding compound and its effect on delamination. In: Proceedings of the HDP07; 2007.
13. Li Xu, Xiuzhen Lu, Johan Liu Xinyu Du, Yan Zhang, Zhaonian Cheng, Adhesion behavior between epoxy molding compound and different leadframes in plastic packaging. In: Proceedings of the ICEPT-HDP conference; 2009.10.1109/ICEPT.2009.5270581 ↗
14. Xiuzhen Lu, Li Xu, Huaxiang Lai, Xinyu Du, Johan Liu, Zhaonian Cheng, Studies on microstructure of epoxy molding compound (EMC)-leadframeinterface after environmental aging. In: Proceedings of the ICEPT-HDP conference; 2009.
15. A ab initio force and structural: conformational and thermophysical properties10.1016/S1386-1425(97)00013-9 ↗
16. The COMPASS force field: parameterization and validation for phosphazenes10.1016/S1089-3156(98)00042-7 ↗
17. Compass: an ab initio force-field optimized for condense-phase applications-overview with details on alkanes and benzene compounds10.1021/jp980939v ↗
18. Wolf · 1992
19. Zhenglong · 2007
20. Adhesion improvement of copper/epoxy joints10.1007/BF01119743 ↗
21. Development and measurement of stress in polymer coatings10.1023/A:1020886802632 ↗