Kissing bond detection in structural adhesive joints using nonlinear dynamic characteristics
Source abstract
Abstract
Abstract In this paper, the effect of kissing bond on nonlinear dynamic behavior of structures with flexible adhesive joint is investigated. Bilinear characteristic due to opening and closing in kissing bond region results in nonlinear dynamic behavior of the structure such as harmonic distortion in response to harmonic excitation. So, the higher-order harmonics can be considered as Nonlinear Damage Indicator Functions (NDIF) for the purpose of damage identification. A two-dimensional (2D) finite element model of a beam connected to a rigid support via a flexible adhesive layer is used to investigate the efficiency of the proposed NDIFs in kissing bond detection. Kissing bond is introduced to the model via contact elements. NDIFs are extracted for the finite element model using single tone stepped-sine test simulation. Parameters such as amplitude of excitation, size and location of kissing bond region as well as friction between kissing surfaces, are studied. The results proved that the NDIFs are sensitive to the size and location of kissing bond. Consequently, in an experimental damage identification procedure, NDIFs can be used as an indicator of kissing bond type damages in adhesive joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Modelling and measurement of the nonlinear behaviour of kissing bonds in adhesive joints10.1016/j.ndteint.2011.12.003 ↗
2. Evaluation of kissing bond in composite adhesive lap joints using digital image correlation: preliminary studies10.1016/j.ijadhadh.2013.01.004 ↗
3. A review of vibration-based structural health monitoring with special emphasis on composite materials10.1177/0583102406065898 ↗
4. A summary review of vibration-based damage identification methods10.1177/058310249803000201 ↗
5. Doebling · 1996
6. Development in vibration-based structural damage detection technique10.1016/j.ymssp.2006.10.002 ↗
7. Modal-vibration-based damage identification
8. Vibration based condition monitoring: a review10.1177/1475921704047500 ↗
9. Vibration-based damage identification methods: a review and comparative study
10. Numerical study of vibrations of a nonlinear mechanical system simulating a cracked body10.1007/BF02510893 ↗
11. A review of nonlinear dynamics applications to structural health monitoring10.1002/stc.215 ↗
12. Bispectral analysis of the bilinear oscillator with application to the detection of fatigue cracks10.1006/jsvi.1998.1738 ↗
13. A.J. Hillis, P.D. Wilcox, B.W. Drinkwater and S.A. Neild, Global crack detection using bispectral analysis, Proc R Soc A 462(2069), 1515-1530, http://dx.doi.org/10.1098/rspa.2005.1620.10.1098/rspa.2005.1620 ↗
14. Higher order coherences for fatigue crack detection10.1016/j.engstruct.2008.10.004 ↗
15. Non-linear dynamics of a cracked cantilever beam under harmonic excitation10.1016/j.ijnonlinmec.2006.08.007 ↗
16. Cracked beam identification by numerically analysing the nonlinear behaviour of the harmonically forced response10.1016/j.jsv.2010.08.032 ↗
17. Experimental damage detection of cracked beams by using nonlinear characteristics of forced response10.1016/j.ymssp.2012.04.007 ↗
18. Nonlinear harmonic identification of breathing cracks in beams10.1016/j.compstruc.2013.05.002 ↗
19. Wave fractal dimension as a tool in detecting cracks in beam structures
20. Structural damage assessment in a cantilever beam with a breathing crack using higher order frequency response functions10.1016/j.jsv.2010.02.026 ↗
21. Nonlinear dynamics and damage assessment of a cantilever beam with breathing edge crack10.1115/1.4003934 ↗
22. Detecting nonlinear behaviour using the Volterra series to assess damage in beam-like structures
23. Harmonic analysis of the vibration of a cantilevered beam with closing crack10.1016/0045-7949(96)00184-8 ↗
24. Crack detection using nonlinear output frequency response functions10.1016/j.jsv.2006.10.039 ↗
25. Time–frequency analysis of the free vibration response of a beam with a breathing crack10.1016/j.ndteint.2004.05.004 ↗
26. Forced vibration behaviour and crack detection of cracked beams using instantaneous frequency10.1016/j.ndteint.2004.11.004 ↗
27. Periodic forced vibration of unsymmetrical piecewise-linear systems by incremental harmonic balance method10.1016/0022-460X(91)90913-5 ↗
28. Identification and parameter estimation of a bilinear oscillator using Volterra series with harmonic probing10.1016/j.ijnonlinmec.2009.08.007 ↗
29. Analysis of bilinear oscillators under harmonic loading using nonlinear output frequency response functions10.1016/j.ijmecsci.2007.03.009 ↗
30. Worden · 2001
31. Experimental characterization and modelization of the relaxation and complex moduli of a flexible adhesive10.1016/j.matdes.2011.01.005 ↗