Effect of hot humid environmental exposure on fatigue crack growth of adhesive-bonded aluminum A356 joints
Source abstract
Abstract
In this study, the effect of hot humid environmental exposure prior to and after adhesive curing on the fatigue crack growth (FCG) behavior of adhesive-bonded aluminum A356 joints was investigated by using single-edge notch bend (SENB) specimen. The results showed that while the exposure after adhesive curing had a significant effect on the FCG resistance of the joints, the exposure of the assembled joints prior to adhesive curing had a relatively small influence. In addition, the effect of load ratio R on the FCG behavior of the exposed joints was studied. The results showed that the FCG of the exposed joints is more sensitive to load ratio R than that of the unexposed joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Joining techniques for aluminum spaceframes used in automobiles Part II –adhesive bonding and mechanical fasteners10.1016/S0924-0136(99)00361-1 ↗
2. Mixed mode I/II fatigue crack growth in adhesive joints10.1016/j.engfracmech.2006.04.009 ↗
3. Anomalous moisture diffusion in an epoxy adhesive detected by magnetic resonance imaging10.1002/app.28106 ↗
4. Free/bound water absorption in an epoxy adhesive10.1016/j.polymer.2005.09.008 ↗
5. Moisture absorption behavior of rubber-modified epoxy resins10.1002/app.11432 ↗
6. DMTA based investigation of hygrothermal ageing of an epoxy system used in rehabilitation10.1002/app.25576 ↗
7. Cause and effect of void formation during vacuum bag curing of epoxy film adhesives10.1163/156856198X00795 ↗
8. Effects of hygrothermal aging on the fatigue behavior of two toughened epoxy adhesives10.1016/j.engfracmech.2011.10.002 ↗
9. Modeling anomalous moisture uptake, swelling and thermal characteristics of a rubber toughened epoxy adhesive10.1016/j.ijadhadh.2004.02.002 ↗
10. Hygrothermal properties of highly toughened epoxy adhesives10.1080/00218464.2010.482405 ↗
11. Moisture absorption–desorption effects in adhesive joints10.1016/j.ijadhadh.2009.05.001 ↗
12. Effects of humid environment on thermal and mechanical properties of a cold-curing structural epoxy adhesive10.1016/j.conbuildmat.2011.12.077 ↗
13. Astrid Bjorgum, and et al. The effect of pre-bond moisture on epoxy-bonded sulphuric acid anodized aluminum10.1016/j.ijadhadh.2003.09.002 ↗
14. Blackman BRK, Johnsen BB, Kinloch AJ, Teo WS. The effects of pre-bond moisture on the fracture behaviour of adhesively-bonded composite joints. J Adhes 2008; 84(3):256–76.10.1080/00218460801954391 ↗
15. Diffusion of moisture in adhesively bonded joints10.1080/00218460108030731 ↗
16. The fatigue and durability behaviour of automotive adhesives, Part II: failure mechanisms10.1080/00218469808009958 ↗
17. A fracture mechanics study of the influence of moisture on the fatigue behaviour of adhesively bonded aluminium-alloy joints10.1016/0143-7496(96)89799-5 ↗
18. The role of the interphase in the environmental failure of adhesive joints10.1016/S1359-6454(00)00240-8 ↗
19. The effect of surface pretreatment and moisture on the fatigue performance of adhesively-bonded aluminum10.1016/j.jmatprotec.2004.04.319 ↗
20. The durability of adhesive joints in the presence of water10.1016/0143-7496(96)00001-2 ↗
21. The effect of warm water surface treatments on the fatigue life in shear of aluminum joints10.1016/j.ijadhadh.2004.10.005 ↗
22. The effects of ageing and environment on the fatigue life of adhesive joints10.1016/0143-7496(92)90028-T ↗
23. Crack growth in structural adhesive joints in aqueous environments10.1007/s10853-006-1181-6 ↗
24. The effects of surface pretreatment on the cyclic-fatigue characteristics of bonded aluminium-alloy joints10.1016/j.ijadhadh.2004.12.004 ↗
25. Pre-treatment of AA6060 aluminum alloy for adhesive bonding10.1016/S0143-7496(01)00049-5 ↗
26. Anodizing as pre-treatment for structural bonding10.1016/S0143-7496(03)00071-X ↗
27. Dry ice blasting as pretreatment of aluminum surfaces to improve the adhesive strength of aluminum bonding joints10.1016/S0143-7496(02)00083-0 ↗
28. Boiling water and silane pretreatment of aluminum alloys for durable adhesive bonding10.1016/S0143-7496(99)00046-9 ↗
29. The effect of environment on the fatigue of bonded composite joints. Part 1: testing and fractography10.1016/S1359-835X(00)00131-7 ↗
30. Adhesive bonding of fibre reinforced polymer composite10.1108/01445150010321797 ↗
31. The effects of test temperature and humidity on the mixed-mode fatigue behavior of a toughened adhesive aluminum joint10.1016/j.engfracmech.2011.01.028 ↗
32. Mostovoy S, Ripling EJ. Flaw tolerance of a number of commercial and experimental adhesives. In: Adhesion science and technology, vol. 9. New York: Plenum Press, 1975. p.64–80.10.1007/978-1-4613-4331-8_9 ↗
33. Hertzberg · 1995
34. Fatigue crack growth in Bonded DCB specimens10.1016/S0013-7944(03)00046-8 ↗
35. Fatigue crack growth in double cantilever beam specimen with an adhesive layer10.1016/S0013-7944(98)00018-6 ↗
36. Effect of metal surface treatment and bonding technology on shear strength
37. Fatigue crack propagation of rubber-toughened epoxies10.1002/pen.760292009 ↗
38. ASTM Standard E813-81, in Annual Book of ASTM Standards, ASTM, Philadelphia, PA; 1987: 968–89.
39. ASTM Standard E647-93, in Annual Book of ASTM standards, ASTM, Section X1.2, Philadelphia; PA 1993: 679–706.
40. ASTM Standard E 399-90, In Annual Book of ASTM Standards, ASTM, West Conshohocken, PA; 1991: 431–61.
41. Fatigue threshold behavior of adhesive joints10.1016/j.ijadhadh.2009.12.004 ↗
42. The effect of ratio and bond interface of the fatigue behavior of a highly-toughened epoxy10.1016/j.engfracmech.2009.09.011 ↗
43. Water absorption by an epoxy resin and its effect on the mechanical properties and infra-red spectra10.1016/0032-3861(93)90254-8 ↗
44. Durability aspects of adhesive-bonded thick adherend lap shear joints10.1016/S0143-7496(99)00063-9 ↗
45. Elber., W. The significance of fatigue crack closure. In: ASTM STP 486. Philadelphia, USA: American society for testing and materials; 1971.10.1520/STP26680S ↗