TIG spot weld bonding of 409 L ferritic stainless steel
Source abstract
Abstract
Abstract Tungsten inert gas (TIG) spot weld bonding is a hybrid joining process, which combines the conventional tungsten inert gas welding with adhesive bonding to achieve a better quality joint with superior joint performance than any single technique. The present research aims to study the effect of input process parameters i.e. welding current, weld time and gas flow rate on weld penetration, bead width and tensile shear strength of the weld bonds using design of experiment (DOE) approach. Further, some selected samples were characterized by optical microscopy and hardness testing. It was observed that weld time most significantly affect the weld performance followed by welding current and gas flow rate. The tensile results showed failure of weld bond in two ways namely interfacial failure and button pull out failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Weld bonding of stainless steel10.1016/j.ijmachtools.2004.06.010 ↗
2. Study of hybrid spot-welded / bonded single-lap joints10.1016/j.ijadhadh.2012.01.018 ↗
3. Joining stainless steel parts by means of weld bonding10.1007/s10999-006-9015-x ↗
4. Strength prediction of weld-bonded joints10.1016/S0143-7496(02)00078-7 ↗
5. Design rationale of weld-bonded joints10.1016/S0143-7496(03)00065-4 ↗
6. da Silva · 2011
7. Experimental analysis and comparison of the strength of simple and hybrid structural joints10.1016/j.ijadhadh.2010.01.005 ↗
8. Fatigue performance of weldbonded high strength sheet steels tested in Arctic, room temperature and tropical environments10.1016/S0143-7496(99)00064-0 ↗
9. Effect of adhesive on molten pool structure and penetration in laser weld bonding of magnesium alloy10.1016/j.optlaseng.2010.04.005 ↗
10. The study on the plasma arc weld bonding process of magnesium alloy10.1016/j.jallcom.2007.11.034 ↗
11. Lap shear strength and fatigue behavior of friction stir spot welded dissimilar magnesium-to-aluminum joints with adhesive10.1016/j.msea.2012.11.039 ↗
12. Weld-bonding of 6061 aluminium alloy10.1007/s00170-014-6670-1 ↗
13. Development of response surface model for tensile shear strength of weld-bonds of aluminium alloy 6061 T65110.1016/j.matdes.2011.05.025 ↗
14. Analysis of the influence of adhesives in laser weld bonded joints10.1016/j.ijadhadh.2014.04.005 ↗
15. The influence of adhesive viscosity and elastic modulus on laser spot weld bonding process10.1016/j.ijadhadh.2013.12.003 ↗
16. Singh · Weld-bonding a state art review · 2017 · 118
17. Studies on the stress distribution and fatigue behavior of weld-bonded lap shear joints10.1016/S0924-0136(00)00842-6 ↗
18. Comparative studies on stresses in weld-bonded, spot-welded and adhesive-bonded joints10.1016/S0924-0136(98)00355-0 ↗
19. Studies on a computational model and the stress ® eld characteristics of weld-bonded joints for a car body steel sheet10.1016/S0924-0136(99)00472-0 ↗
20. The effect of the adhesive on the microcracks in the laser welded bonding Mg to Al joint10.1016/j.msea.2008.11.061 ↗
21. A novel weld-bonding hybrid process for joining Mg alloy and Al alloy10.1016/j.matdes.2011.03.050 ↗
22. Tensile-shear fatigue behavior of aluminum and magnesium lap-joints obtained by ultrasonic welding and adhesive bonding10.1016/j.proeng.2011.04.586 ↗
23. Laser spot weld bonding of mild steel10.1016/j.ijadhadh.2011.12.011 ↗
24. Characterization and Strain-Hardening Behavior of Friction Stir-Welded Ferritic Stainless Steel
25. Effect of pressure pulsation on bond interface characteristics of 409 ferritic stainless steel diffusion bonds10.1016/j.vacuum.2017.09.049 ↗
26. Optimization of gas tungsten arc welding process by response surface methodology10.1016/j.matdes.2013.08.032 ↗
27. Microstructure and failure behavior of dissimilar resistance spot welds between low carbon galvanized and austenitic stainless steels10.1016/j.msea.2007.07.007 ↗
28. Tensile-Shear Forces and Fracture Modes in Single and Multiple Weld Specimens in Dual-Phase Steels10.1115/1.2137751 ↗