journal article·2013-10Open access

New bonded assembly configuration for dynamic mechanical analysis of adhesives

N. Causse, L. Quiroga Cortes, E. Dantras, C. Tonon, M. Chevalier, H. Combes, P. Guigue, C. Lacabanne

Publisher page

Abstract

A new sample configuration has been developed in order to study molecular mobility of an adhesive in a bonded assembly configuration by dynamic mechanical analysis. The torsional rectangular mode is used to provide a shear solicitation all along the adherend/adhesive interface. The initial mechanical properties of each assembly's constituent are first investigated as reference. The modulus of aluminum foils used as substrates exhibits a classic elastic component and a slight viscous part due to microstructural changes or stress relaxation. Four relaxation modes are highlighted and identified for epoxy adhesive tested as a bulk material. Its viscoelastic behavior is compared to the one of adhesive tested in assembly configuration. The relaxation modes of the adhesive remain visible in spite of the sample stiffening by aluminum foils. Relaxation modes comparison shows that the temperature of loss modulus associated with the mechanical manifestation of glass transition slightly increases for the assembly configuration. Energy losses during this relaxation are much higher in the assembly configuration. Influence of rigid aluminum substrates is discussed in terms of the adhesively bonded joint solicitation mode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Murayama · 1982 · 1
2. Structure–property relationships in epoxy-amine networks of well-controlled architecture10.1088/0954-0083/12/1/311 ↗
3. Mechanical improvement of P(VDF-TrFE)/nickel nanowires conductive nanocomposites: influence of particles aspect ratio10.1016/j.jnoncrysol.2011.09.019 ↗
4. Investigation of hydrothermal ageing of a filled rubber toughened epoxy resin using dynamic mechanical thermal analysis and dielectric spectroscopy10.1016/S0032-3861(00)00042-2 ↗
5. Thermo-mechanical analysis of dental silicone polymers10.1007/s10853-006-0852-7 ↗
6. Dynamic mechanical properties and adhesive strengths of epoxy resins modified with liquid rubber:I—Modification with ATBN10.1002/app.1985.070301007 ↗
7. Determination of activation energy for glass transition of an epoxy adhesive using dynamic mechanical analysis10.1023/A:1010120921582 ↗
8. A study of the cure of adhesives using dynamic mechanical analysis10.1016/0143-7496(93)90037-A ↗
9. Kinetic analysis of phenol–formaldehyde bonded wood joints with dynamical mechanical analysis10.1016/j.tca.2009.03.001 ↗
10. An alternative method to the curing study of polymeric die attach adhesives using dynamic mechanical analysis10.1016/S0040-6031(00)00653-5 ↗
11. Dynamic mechanical response of adhesively bonded beams: effect of environmental exposure and interfacial zone properties10.1002/pen.760300409 ↗
12. Measurement of adhesive bond properties including damage by dynamic mechanical thermal analysis of a beam specimen10.1080/00218469509342404 ↗
13. Improvement in strength of the aluminium/epoxy bonding joint by modification of the interphase10.1002/masy.200450639 ↗
14. Aluminium preatreatment and the properties of adhesively bonded joints10.1002/1521-3900(200102)164:1<465::AID-MASY465>3.0.CO;2-I ↗
15. An in situ technique for the assessment of adhesive properties of a joint under load10.1007/s10704-011-9630-x ↗
16. The role of the interphase in the environmental failure of adhesive joints10.1016/S1359-6454(00)00240-8 ↗
17. Mechanical characterization of adhesivelayer in-situ and as bulk material10.1080/00218468108071207 ↗
18. Mechanical properties of adhesives in-situ and in bulk10.1016/0143-7496(94)90018-3 ↗
19. Determination of the complex shear modulus of structural adhesives using a doubly clamped sandwich beam10.1007/BF02324723 ↗
20. Investigating the thin-film versus bulk material properties of structural adhesives10.1080/00218464.2011.538326 ↗
21. Intrinsic mechanical characterization of structural adhesives10.1016/0143-7496(86)90011-4 ↗
22. Shear stress–strain characteristics of adhesive layers10.1080/00218467808075106 ↗
23. Deformation and failure of adhesive bonds under shear loading10.1007/BF00361160 ↗
24. The viscoelastic constitutive modelling of adhesives10.1016/0010-4361(82)90146-X ↗
25. Formation of epoxy-diamine/metal interphases10.1016/S0143-7496(02)00021-0 ↗
26. Epoxy-amine/metal interphases: influences from sharp needle-like crystal formation10.1016/j.ijadhadh.2006.09.009 ↗
27. Electron microscopic studies on the diffusion of metal ions in epoxy–metal interphases10.1016/j.ijadhadh.2009.12.001 ↗
28. Viscosity effect on epoxy-diamine/metal interphases—part II: mechanical resistance and durability10.1016/j.ijadhadh.2006.03.001 ↗
29. Causse N. Analyse des relaxations enthalpiques, mécaniques et diélectriques pour l'étude du vieillissement d'assemblages collés structuraux. PhD thesis. Université Paul Sabatier, Toulouse; 2012.
30. McCrum · 1967 · 102
31. Mondolfo · 1976 · 68
32. Analysis of the internal friction spectra of high purity aluminium at medium temperatures10.1016/S0925-8388(00)00929-4 ↗
33. Experimental evidence of the viscous behavior of grain boundaries in metals10.1103/PhysRev.71.533 ↗
34. Aguiar Rodriguez · 2009
35. High-temperature damping in Al–Mg–Si industrial alloys10.1002/pssa.2211580213 ↗
36. Chevalier M. Vieillissement hygrothermique d'assemblages structuraux polyepoxy: analyse de la mobilité moléculaire par spectroscopie diélectrique dynamique. PhD Thesis. Université Paul Sabatier, Toulouse; 2008.
37. Correlation between sub-Tg relaxation processes and mechanical behavior for different hydrothermal ageing conditions in epoxy assemblies10.1002/app.31253 ↗
38. Dynamic mechanical and 13C n.m.r. investigations of molecular motions involved in the β relaxation of epoxy networks based on DGEBA and aliphatic amines10.1016/S0032-3861(96)00694-5 ↗
39. Secondary retardation modes in diglycidyl ether of bisphenol A—diamino diphenyl methane networks10.1002/polb.1994.090320807 ↗
40. The beta relaxation in epoxy resin-based networks10.1002/app.1979.070231201 ↗
41. Dynamic mechanical properties of aromatic, aliphatic, and partially fluorinated epoxy resins10.1002/pol.1967.160050411 ↗
42. The temperature-dependence of some mechanical properties of a cured epoxy resin system10.1002/pen.760251305 ↗
43. Thermodynamic and mechanical properties of amine-cured epoxy resins using group interaction modelling10.1007/s10853-006-0202-9 ↗
44. Damping of flexural waves by a constrained viscoelastic layer10.1121/1.1907821 ↗
45. The glass transition temperature Tg of polymers—comparison of the values from differential thermal analysis (DTA, DSC) and dynamic mechanical measurements (torsion pendulum)10.1016/S0142-9418(00)00023-4 ↗
46. Environmental ageing of aerospace epoxy adhesive in bonded assembly configuration10.1007/s10973-013-3009-3 ↗
47. Network structure in epoxy aluminium bonds after mechanical treatment10.1016/S0143-7496(02)00014-3 ↗
48. Formation and structure of epoxy network interphases at the contact to native metal surfaces10.1016/j.crci.2005.04.009 ↗