journal article·2013-07

Role of surface active additives on reduction of surface free energy and enhancing the mechanical Attributes of easy-to-clean automotive clearcoats: Investigating resistance against simulated tree gum

N. Naseh, M. Mohseni, B. Ramezanzadeh

Publisher page

Abstract

Abstract The objective of this work is enhancing the clearcoat resistance against simulated tree gum (Arabic gum) using surface active additives including hydroxyl-functional polydimethyl siloxane (PDMS) and hydroxyl-functional silicone polyacrylate which are able to reduce gum adhesion to the clearcoat surface by reducing its surface free energy and work of adhesion. Using a contact angle measuring device, the surface free energy, contact angle and work of adhesion were obtained. The mechanical and structural properties of the clearcoats were studied by tensile test, dynamic mechanical thermal analysis (DMTA) and Fourier transform Infrared spectroscopy (FT-IR). Results showed that both additives enhanced the clearcoat easy-to-clean properties and reduced work of adhesion and surface free energy. The decrease in surface free energy and work of adhesion was more pronounced in presence of hydroxyl-functional polydimethyl siloxane. It was found that polydimethyl siloxane could produce contact angles much greater than silicone polyacrylate. Both additives increased clearcoat cross-linking density and toughness by participating in curing reaction. Results showed that the increase in cross-linking density and toughness was more effective when polydimethyl siloxane based additive was used. Results also revealed that additives could significantly improved the clearcoat resistance against Arabic gum by reducing gum adhesion to the surface. Both number of cracks and etched areas were reduced in presence of the additives especially in presence of polydimethyl siloxane. Both the chemical structure and functionality of the additives were found influential parameters which could alter the clearcoat surface cleanability and biological resistance against simulated tree gum.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Surface Modification and Superhydrophobicity · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Degradation of organic coatings I. Hydrolysis of melamine formaldehyde/acrylic copolymer films10.1002/app.1982.070271002 ↗
2. Chemical criteria for durable automotive topcoats
3. Automotive waterborne surfacer with improved stone chip resistance10.1016/0033-0655(93)80017-5 ↗
4. Mar resistance of automotive clear coats: I. Relationship to coating mechanical properties
5. Mechanism of acid rain etching of acrylic/melamine coatings10.1016/S0300-9440(98)00085-X ↗
6. Relating laboratory and outdoor exposure of coatings: II. Effects of relative humidity on photo-degradation and the apparent quantum yield of acrylic melamine coatings
7. Relating laboratory and outdoor exposure of coatings III. Effect of relative humidity on moisture-enhanced photolysis of acrylic-melamine coatings10.1016/S0141-3910(02)00070-8 ↗
8. Relating laboratory and outdoor exposures of acrylic melamine coatings, IV. Mode and mechanism for hydrolytic degradation of acrylic-melamine coatings exposed to water vapor in the absence of light10.1007/BF02720521 ↗
9. Effect of weathering on the stress distribution and mechanical performance of automotive paint systems10.1007/BF02730084 ↗
10. The effects of weathering on the mechanical performance of automotive paint systems10.1016/S0300-9440(98)00060-5 ↗
11. The effect of basecoat pigmentation onmechanical properties of an automotive basecoat/clear coat system during weathering10.1016/j.polymdegradstab.2009.04.008 ↗
12. The effect of natural tree gum and environmental condition on the degradation of a typical automotive clear coat10.1007/s10924-010-0201-4 ↗
13. A study of thermal–mechanical properties of an automotive coating exposed to natural and simulated bird droppings10.1007/s10973-009-0442-4 ↗
14. A mechanistic study of degradation of a typical automotive clear coat caused by bird droppings10.1007/s11998-010-9273-2 ↗
15. The role of basecoat pigmentation on the biological resistance of an automotive clear coat10.1007/s11998-010-9254-5 ↗
16. An evaluation of an automotive clear coat performance exposed to bird droppings under different testing approaches10.1016/j.porgcoat.2009.06.010 ↗
17. Use of analytical techniques to reveal the influence of chemical structure of clearcoat on its biological degrada- tion caused by bird-droppings10.1016/j.porgcoat.2009.08.003 ↗
18. Studying the effects of the chemical structure of an automotive clear coat on its biological degradation caused by tree gums10.1007/s11998-010-9312-z ↗
19. On the electrochemical and structural behavior of biologically degraded automotive coatings; Part1: Effect of natural and simulated bird droppings10.1016/j.porgcoat.2010.12.003 ↗
20. Effects of environmental conditions on degradation of automotive coatings
21. Effect of polysiloxane additives on the scratch resistance of an acrylic melamine automotive clear coat10.1007/s11998-010-9239-4 ↗
22. Mobility and distribution of silicone additives in coatings; a spectroscopic study
23. Gommans L. Polysiloxane coatings—a mature technology. Corrosion and prevention. Paper 072:1–8; 2000.
24. Phase behavior and mechanical properties of siloxane–urethane copolymer10.1007/s10965-004-2501-7 ↗
25. Investigating the anti-graffiti properties of a polyurethane clearcoat containing a silicone modified polyacrylate additive10.1007/s11998-011-9324-3 ↗
26. Studying the surface properties of a polyurethane based anti-graffiti coating against UV exposure10.1002/app.35344 ↗
27. Attributing the resistance against simulated tree gum of an acrylic/melamine film loaded with an active silicone additive to its surface free energy10.1016/j.ijadhadh.2011.07.007 ↗
28. A reformulation of the equation of state for interfacial tensions10.1016/0021-9797(90)90067-X ↗
29. Analysis for determining surface free energy uncertainty by the Owen–Wendt method10.1016/j.ijadhadh.2008.09.008 ↗
30. Mechanical property changes and degradation during accelerated weathering of polyester–urethane coatings10.1007/s11998-006-0004-7 ↗