journal article·2014-04

Experimental and theoretical stress analysis for an interface stress model of single-L adhesive joints between CFRP and aluminum components

Kaifu Zhang, Lin Li, Yuanxin Duan, Yuan Li

Publisher page

Abstract

Abstract This paper presents a two-dimension analytical model of peeling stress distribution for the single-L peel adhesive joints consisting of carbon-fiber-reinforced plastic (CFRP) and aluminum alloy under the tensile loading environment. The advanced balance equation is established considering the substrate bending stiffness coefficient to describe the peeling stress distribution when backing and substrate are both relatively stiff materials. The specific boundary conditions for the peel test of single-L adhesive joints are also integrated. The curve of peeling stress distribution is a damping harmonic function whose period and peak values are decided by the nature of the adhesive, the mechanical properties, and the geometries of the single-L peel adhesive joint. The effectiveness of the analytical model is verified by comparing with the results obtained from peel test and finite element analysis. Numerically, the influence on the peeling stress distribution due to the different configurations of substrate thickness and clamping length is also investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Mathematical representation of bolted-joint stiffness: a new suggested model10.1007/s12206-011-0725-0 ↗
2. Characteristics of the residual stress distribution in welded tubular T-joints10.1007/BF03177399 ↗
3. Theory and analysis of peel adhesion: bond stresses and distributions10.1122/1.548868 ↗
4. Theory and analysis of peel adhesion: mechanisms and mechanics10.1122/1.548850 ↗
5. Stress distribution during peeling of adhesive tapes10.1080/00218468108073177 ↗
6. Adhesion of viscoelastic materials to rigid substrates10.1098/rspa.1969.0085 ↗
7. Fracture mechanics on polyethylene/polybutene-1 peel films10.1016/j.polymertesting.2008.09.002 ↗
8. Peeling shear and cleavage failure due to tape prestrain10.1080/00218460490465722 ↗
9. Peeling of polydimethylsiloxane adhesives: the case of adhesive failure10.1002/polb.21045 ↗
10. Peeling of polydimethylsiloxane adhesives at low velocities: cohesive failure10.1002/polb.20318 ↗
11. The influence of peel angle on the mechanics of peeling flexible adherends with arbitrary load–extension characteristics
12. Finite element and experimental studies on single-lap balanced joints in tension10.1016/S0143-7496(00)00052-X ↗
13. Two-and three-dimensional geometrical nonlinear finite elements for analysis of adhesive joints10.1016/S0143-7496(00)00024-5 ↗
14. A three-dimensional finite element model for stress analysis of adhesive joints10.1016/S0143-7496(02)00015-5 ↗
15. Nonlinear stress analysis for bonded patch to curved thin-walled structures10.1016/S0143-7496(03)00063-0 ↗
16. Standard finite element techniques for efficient stress analysis of adhesive joints10.1016/j.ijadhadh.2008.01.005 ↗
17. Failure analysis of bonded T-peel joints: efficient modelling by standard finite elements with experimental validation10.1016/j.ijadhadh.2009.10.004 ↗
18. Adhesive and composite failure prediction of single-L joint structures under tensile loading10.1016/j.ijadhadh.2004.02.005 ↗
19. Composite failure prediction of single-L joint structures under bending10.1016/j.compositesa.2004.06.021 ↗
20. Modeling the failure of an adhesive layer in a peel test10.1002/polb.10289 ↗
21. A generalized cohesive zone model of the peel test for pressure-sensitive adhesives10.1016/j.ijadhadh.2008.05.002 ↗
22. Modeling of mixed-mode debonding in the peel test applied to superficial reinforcements10.1016/j.ijsolstr.2008.05.024 ↗
23. Elastic analysis and engineering design formulae for bonded joints10.1016/0143-7496(89)90066-3 ↗
24. A parametric study of the peel test10.1016/j.ijadhadh.2007.06.006 ↗