Hydration and mechanical properties of cement/sludge/anhydrite gypsum system
Source abstract
Abstract
Setting and hardening of fresh blends of ordinary Portland cement (OPC), fired drinking water treatment sludge (DWTS) and calcined anhydrite gypsum were investigated. Sludge or Portland cement was substituted with 5 wt%, 10 wt% or 15 wt% of anhydrite gypsum. These systems lead to the preparation of supersulfated cement. These blends were shown to possess both the advantages of gypsum (early hardening, high early strength and enhanced workability) and Portland cement (improved durability in moist conditions). The initial and final setting time, bulk density and compressive strength of cement pastes were measured. Differential scanning calorimetry, X-ray diffraction and Fourier transform infrared spectroscopy techniques were used to investigate the hydration products. Substitution of DWTS with 15% anhydrite accelerates the final setting time and increases the bulk density as well as the compressive strength. Substitution of OPC with 5% anhydrite gives the same results but extends the final setting time. It can be concluded that supersulfated cement can be prepared from samples with 10–15 wt% anhydrite substituted DWTS or from the sample with 5 wt% anhydrite substituted OPC.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry, Faculty of Science, Zagazig University, Egypt
Department of Chemical Engineering, National Research Centre, Dokki, Cairo, Egypt
References (26)
Show source-provided references
1. Alqam M · Jordan Journal of Civil Engineering · 2011 · 5 · 268
2. 10.1016/j.conbuildmat.2010.11.07310.1016/j.conbuildmat.2010.11.073 ↗
3. 10.1016/j.cemconres.2004.07.04110.1016/j.cemconres.2004.07.041 ↗
4. ASTM · 2008
5. El-Didamony H · Silicates Industriels · 1989 · 54 · 95
6. 10.1680/adcr.2005.17.1.910.1680/adcr.2005.17.1.9 ↗
7. 10.1016/j.cemconcomp.2012.01.00810.1016/j.cemconcomp.2012.01.008 ↗
8. Heikal M · Indian Journal of Engineering and Materials Sciences · 2000 · 7 · 154
9. 10.1016/j.conbuildmat.2012.12.04110.1016/j.conbuildmat.2012.12.041 ↗
10. 10.1016/j.conbuildmat.2013.05.03310.1016/j.conbuildmat.2013.05.033 ↗
11. 10.1016/S0008-8846(98)00005-210.1016/S0008-8846(98)00005-2 ↗
12. Mohammed MS . The Pozzolanic Activity of Air-cooled Slag. MSc thesis, 2000, Zagazig University, Zagazig, Egypt.
13. 10.1108/PRT-05-2013-003810.1108/PRT-05-2013-0038 ↗
14. 10.1016/j.cemconres.2009.11.01210.1016/j.cemconres.2009.11.012 ↗
15. 10.1016/j.conbuildmat.2008.11.00110.1016/j.conbuildmat.2008.11.001 ↗
16. 10.1016/0008-8846(82)90035-710.1016/0008-8846(82)90035-7 ↗
17. Serry MA · Silicate Industries · 1987 · 81
18. 10.1016/0040-6031(83)80345-110.1016/0040-6031(83)80345-1 ↗
19. Taha AS · Zement-Kalk-Gips · 1981 · 34 · 315
20. 10.1016/0040-6031(85)87106-910.1016/0040-6031(85)87106-9 ↗
21. 10.1016/j.rser.2012.10.03210.1016/j.rser.2012.10.032 ↗
22. Vedat P · Environmental Technology · 1994 · 15 · 83310.1080/09593339409385490 ↗
23. Vijaya KK · International Journal of Emerging Trends in Engineering and Development · 2012 · 4 · 509
24. 10.1016/j.cemconres.2009.08.01410.1016/j.cemconres.2009.08.014 ↗
25. 10.1016/j.cemconres.2009.01.01710.1016/j.cemconres.2009.01.017 ↗
26. Zandi Y · Advances in Environmental Biology · 2012 · 6 · 2958