Analytical model of double-lap bonded joints subjected to impact loads
Source abstract
Abstract
A stress analysis of adhesively bonded double lap joints having half-infinite lengths was performed using a half-closed-form approach. The approach is based on an improved shear-lag model. Thus normal deformations and shear deformations were considered inside the adherends. Differential equations governing adherends-interfaces displacements were extracted from the dynamic equilibrium equations. Laplace transform was used to solve the differential equations. The stress variation with respect to time at the edge of the adhesive layer was investigated. Transfer function between applied load and adhesive edge shear stress was extracted. Impulse response was deduced using the inverse Laplace׳s transform of the transfer function. Impulse response appeared to be a zero-order Bessel function. The indicial response of the joint can be calculated by the integration of the impulse response over time. The model was validated for different substrates׳ materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. New experimental sample for shear testing of adhesively bonded assemblies10.1142/S0217979208046359 ↗
2. Determination of dynamic shear stress strain relationship in adhesively bonded assemblies
3. Experimental investigation of the shear dynamic behavior of double-lap adhesively bonded joints on a wide range of strain rates10.1016/j.ijadhadh.2010.11.014 ↗
4. Experimental evaluation of the dynamic bond strength between CFRP sheets and steel under direct tensile loads10.1016/j.ijadhadh.2012.08.001 ↗
5. Finite-element analysis of SHPB tests on double-lap adhesive joints10.1016/j.ijadhadh.2010.02.004 ↗
6. Finite element analysis of adhesively bonded composite joints subjected to impact loadings
7. Predictive modeling of damage and failure in adhesively bonded metallic joints using cohesive interface elements10.1016/j.ijadhadh.2013.12.001 ↗
8. Impact response of single lap composite joints
9. Dynamic stress responses at the edges of adhesive layers in lap strap joints of half-infinite length subjected to impact loads10.1016/j.ijadhadh.2009.02.005 ↗
10. Analytical models of adhesively bonded joints – part I: literature survey10.1016/j.ijadhadh.2008.06.005 ↗
11. Die Nietkraftverteilung in zugbeanspruchten Nietverbindungen mit konstanten Laschenquerschnitten
12. The strength of glued joints10.1108/eb031117 ↗
13. The stresses in cemented joints10.1115/1.4009336 ↗
14. Effects of adherend deflections in single-lap joints10.1016/0020-7683(94)90037-X ↗
15. Hart-Smith · 1973
16. Improved theoretical solutions for adhesive lap joints10.1016/S0020-7683(97)00097-8 ↗
17. Dynamic response of adhesively bonded single-lap joints with a void subjected to harmonic peeling loads
18. Experimental and analytical investigation of the dynamic response of a lap joint subjected to harmonic peeling loads10.1115/1.1596550 ↗
19. Dynamic response of the tubular joint with an annular void subjected to a harmonic torsional loading
20. Dynamic response of tubular joints with an annular void subjected to a harmonic axial load10.1016/S0143-7496(02)00016-7 ↗
21. Analytical model of the double-lap bonded joints response to harmonic loads10.1016/j.euromechsol.2011.12.005 ↗
22. APC2 PEEK thermoplastic polymer, technical data sheet, Cytec Engineering Materials, http://www.cytec.com/sites/default/files/datasheets/APC-2_PEEK_031912-01.pdf.