X-ray diffraction and fracture based analysis of residual stresses in stainless steel–epoxy interfaces with electropolishing and acid etching substrate treatments
Source abstract
Abstract
Abstract The aim of this study is to investigate the effect of a stainless steel surface condition on the thermal residual stresses at a bi-material interface. AISI 304 stainless steel–epoxy specimens with either as-received, nitric acid etched or electropolished substrates were prepared. Exact specimen curvatures and an analytical method were used to estimate residual stresses and the behaviour of the epoxy layer. X-ray diffraction stress measurement (XRD) was performed to determine the interfacial stress state. In addition, a method was developed to examine the interface fracture toughness of the specimens. Based on the results, the residual stress estimation at the interface was confirmed and the effect of the surface treatments on the interface fracture toughness was evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Fiber metal laminates
2. The prediction of tensile failure in titanium-based thermoplastic fibre-metal laminates10.1016/j.compscitech.2005.11.031 ↗
3. The applicability of magnesium based fibre metal laminates in aerospace structures10.1016/j.compscitech.2008.06.017 ↗
4. Sarlin E, Luukkonen A, Vippola M, Vuorinen J, Lepistö T. Failure behavior of a three-layer steel/rubber/FRP hybrid structure. In: Asian–Australasian conference on composite materials (proceedings). Taipei, Taiwan; 2010.
5. On the axial and interfacial shear stresses due to thermal mismatch in hybrid composite sheets10.1016/0266-3538(95)00085-2 ↗
6. Sinke J. Manufacturing principles for fiber metal laminates. In: International Conference on Composite Materials (Proceedings). Edinburgh, UK; 2009.
7. Evolution of residual stresses in modified epoxy resins for electronic packaging applications10.1016/j.compositesa.2004.01.002 ↗
8. Smart cure cycle with cooling and reheating for co-cure bonded steel/carbon epoxy composite hybrid structures for reducing thermal residual stress10.1016/j.compositesa.2005.09.015 ↗
9. Reduction of fabricational thermal residual stress of the hybrid co-cured structure using a dielectrometry10.1016/j.compscitech.2006.05.002 ↗
10. A model of fatigue delamination in composites10.1016/S0266-3538(99)00156-6 ↗
11. Application of the energy release rate approach for delamination growth in glare10.1016/j.engfracmech.2005.10.006 ↗
12. An analysis of interface delamination mechanisms in orthotropic and hybrid fiber-metal composite laminates10.1016/j.engfracmech.2006.09.004 ↗
13. Numerical assessment of delamination in fibre metal laminates10.1016/S0045-7825(99)00256-X ↗
14. Numerical analysis of directionally unstable crack propagation in adhesively bonded joints10.1016/S0020-7683(01)00006-3 ↗
15. Energy release rates of bi-material interface crack including residual thermal stresses: Application of crack tip element method10.1016/j.engfracmech.2009.09.018 ↗
16. Fatigue delamination growth in carbon fibre-reinforced aluminium laminates10.1016/1359-835X(95)00006-N ↗
17. Delamination growth from face sheet seams in cross-ply titanium/graphite hybrid laminates10.1016/S0266-3538(00)00206-2 ↗
18. Benedictus, R. Delamination growth in fibre metal laminates under variable amplitude loading10.1016/j.compscitech.2009.07.019 ↗
19. Misinterpreting the results: How similitude can improve our understanding of fatigue delamination growth10.1016/j.compscitech.2010.11.010 ↗
20. On the evaluation of residual stresses in bi-layer materials using the bent strip method10.1016/j.surfcoat.2007.07.004 ↗
21. Thermal residual stress analysis of epoxy bi-material laminates and bonded joints10.1016/j.ijadhadh.2010.03.009 ↗
22. Prevéy P. Current applications of X-ray diffraction residual stress measurements. Lambda Technologies; 1996 (cited: May, 2012) 〈http://www.lambdatechs.com/html/resources/214.pdf/〉.
23. The effects of electropolishing (ep) process parameters on corrosion resistance of 316L stainless steel10.1016/S0924-0136(03)00785-4 ↗
24. An experimental investigation of residual stresses in an epoxy–steel laminate10.1016/j.ijadhadh.2005.07.006 ↗
25. The effect of residual thermal stresses on the fatigue crack growth of laser-surface-annealed AISI 304 stainless steel. Part 1: computer simulation10.1016/j.msea.2003.07.003 ↗
26. Parnes · 2001
27. Mixed mode fracture criteria for an interface crack10.1016/0013-7944(94)90094-9 ↗
28. Crack path selection in adhesively bonded joints: the roles of external loads and specimen geometry10.1023/A:1015020919823 ↗
29. Measurement of residual stresses in coatings on brittle substrates by indentation fracture10.1111/j.1151-2916.1987.tb05006.x ↗
30. Analysis of the notched coating adhesion test10.1080/00218469908015921 ↗
31. Deformation and stress build-up in bi-material beam specimens with a curing FM300 adhesive interlayer10.1016/j.compositesa.2007.10.019 ↗
32. XPS investigation of stainless steel surfaces heated in aqueous media10.1016/0042-207X(83)90539-0 ↗
33. Corrosion of 304 stainless steel exposed to nitric acid-chloride environments10.1016/S0010-938X(97)00092-9 ↗
34. Beckit F, Bastow B, Gladman T. Effects of residual element contents on corrosion resistance of type 304L stainless steels in boiling nitric acid. In: Stainless steels ‘87 (proceedings). The institute of metals; 1988. p. 234–46.
35. Electropolishing of 304 stainless steel: Interactive effects of glycerol content, bath temperature, and current density on surface roughness and morphology10.1016/j.surfcoat.2009.08.005 ↗
36. Electropolishing effects on corrosion behavior of 304 stainless steel in high temperature, hydrogenated water10.1016/j.corsci.2008.06.032 ↗
37. Fracture criterion for kinking cracks in a tri-material adhesively bonded joint under mixed mode loading10.1016/j.engfracmech.2005.03.008 ↗
38. Adherend surface morphology and its influence on the peel strength of adhesive joints bonded with modified phenolic and epoxy structural adhesives10.1016/0143-7496(94)90017-5 ↗
39. Austenitic stainless steels in high temperature phosphoric acid10.1016/j.jpowsour.2008.02.086 ↗
40. Evolution of the passive film and organic constituents at the surface of stainless steel immersed in fresh water10.1016/j.jcis.2007.09.087 ↗
41. Sugimoto K, Matsuda S. In-situ ellipsometric determination of thickness and optical constants of passive films on austenitic stainless steels. In: Stainless steels ‘87 (proceedings). The institute of metals; 1988. p. 201–6.
42. Influence of surface treatments on the durability of stainless steel sheets bonded with epoxy10.1163/156856192X00304 ↗
43. Metalplastic adhesion in injection-molded hybrids10.1163/016942409X12489445844435 ↗
44. Characterization of silane layers on modified stainless steel surfaces and related stainless steel-plastic hybrids10.1016/j.apsusc.2011.05.058 ↗