A viscoelastic‐viscoplastic model with non associative plasticity for the modelling of bonded joints at high strain rates
Source abstract
Abstract
Abstract The purpose of this work is to present a constitutive model able to represent the behaviour of rubber-toughened adhesive joints under dynamic loading. A fully coupled viscoelastic–viscoplastic damage model at finite strains developed for mineral filled semi-crystalline polymer is identified for an epoxy adhesive. The parameters of the model are identified from experimental tests undertaken on bulk material in compression and tension at several loading speeds. In order to validate the accuracy of the model to represent bonded joints, a specific dynamic Arcan device is used. Experimental tests on this apparatus are carried out for tensile, shear and mixed tensile/shear loadings at 1 mm/s, 10 mm/s and 100 mm/s. A very good agreement between experimental and numerical results is obtained for a large strain rate range and for various stress states.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Polymer crystallization and properties · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Characterization and modelling of the viscous behaviour of adhesives using the modified arcan device10.1080/01694243.2014.991483 ↗
2. A fully coupled elastoviscoplastic damage model at finite strains for mineral filled semi-crystalline polymer10.1016/j.ijplas.2013.05.002 ↗
3. Non-associated viscoplasticity coupled with an integral-type nonlocal damage model for mineral filled semi-crystalline polymers10.1016/j.compstruc.2013.12.006 ↗
4. Compression and shear behavior of epoxy sa 80 bulk adhesive over wide ranges of strain rate
5. Development of an improved adhesive test method for composite assembly design10.1016/j.compscitech.2004.09.008 ↗
6. Numerical analysis of edge effects in adhesively-bonded assemblies application to the determination of the adhesive behaviour10.1016/j.compstruc.2008.02.003 ↗
7. Dufour L, Bourel B, Lauro F, Haugou G, Leconte N, Carrere N. A new arcan test device for dynamic loadings of adhesively bonded joints. In: 3rd International Conference on Structural Adhesive Bonding. Porto, Portugal; 2015.
8. Measurement and models for design with modern adhesives10.1016/S0143-7496(03)00006-X ↗
9. Constitutive model for a semi-crystalline polymer under dynamic loading10.1016/j.ijsolstr.2011.02.009 ↗
10. Feucht M, Haufe A, Pietsch G. Adhesive modeling in crash simulation. In: LS-DYNA Forum, Frankenthal. Germany; 2007.
11. A viscoelastic–viscoplastic constitutive model for glassy polymers10.1016/S0020-7683(00)00339-5 ↗
12. Determination of the plastic behaviour of solid polymers at constant true strain rate10.1007/BF00772717 ↗
13. Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking10.1016/S0020-7683(02)00184-1 ↗
14. Study on the effect of strain rate of adhesive material on the stress state in adhesive joints10.1080/00218464.2011.597308 ↗
15. High strain rate compressive and tension behaviour of an epoxy bi–component adhesive10.1016/j.ijadhadh.2007.08.004 ↗
16. Implementation, identification and validation of an elasto-plastic-damage model for the finite element simulation of structural bonded joints10.1016/j.ijadhadh.2014.01.020 ↗
17. The SEĖ method for determination of behavior laws for strain rate dependent material: application to polymer material10.1016/j.ijimpeng.2009.11.007 ↗
18. Experimental characterization of a toughened epoxy adhesive under a large range of strain rates10.1163/016942410X524417 ↗
19. A new cohesive element for structural bonding modelling under dynamic loading10.1016/j.ijimpeng.2012.02.003 ↗
20. Identification of johnson-cook׳s viscoplastic model parameters using the virtual fields method: application to titanium alloy ti6al4v
21. Nonlinear analysis of adhesively bonded lap joints considering viscoplasticity in adhesives10.1016/S0045-7949(98)00168-0 ↗
22. The effect of hydrostatic pressure on the shear yield behaviour of polymers10.1007/PL00020253 ↗
23. The macroscopic yield behaviour of polymers10.1007/BF00550671 ↗
24. On the experimental mixed-mode failure of adhesively bonded metallic joints10.1016/j.ijadhadh.2014.03.002 ↗
25. Bonded joints with composite adherends. part ii. finite element analysis of joggle lap joints10.1016/j.ijadhadh.2005.03.014 ↗
26. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids10.1016/0022-5096(92)90020-3 ↗