Analysis of energy release rate for fatigue cracked metal-to-metal double-lap shear joints
Source abstract
Abstract
Abstract This paper presents an analytical model for understanding crack propagation behaviour of adhesively bonded cracked double-lap shear joints subjected to tension–tension fatigue loading. The analytical model can be used to calculate the bending moments at the cross sections of the crack tips and strain-energy release rates at the two crack tips. The accuracy of the analytical model is established by comparing the calculated bending moments and energy release rates with those predicted using the finite element method. Numerical and preliminary experimental testing results show that after cracking initiates in one of the two adhesive layers it will then propagate a set distance before crack initiation and growth in the opposite adhesive layer begins. Subsequent crack growth in either adhesive layer then alternates as a function of time.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. The prediction of crack growth in bonded joints under cyclic-fatigue loading I. Experimental studies10.1016/S0143-7496(03)00074-5 ↗
2. The prediction of crack growth in bonded joints under cyclic-fatigue loading II. Analytical and finite element studies10.1016/S0143-7496(03)00075-7 ↗
3. Stress analysis of the cracked-lap-shear specimen10.1520/JTE11028J ↗
4. On the fracture parameter in a clamped cracked lap shear adhesive joint10.1016/0143-7496(92)90007-I ↗
5. The cracked lap shear specimen revisited—a closed form solution10.1016/0020-7683(95)00124-7 ↗
6. Failure of adhesive bonded composite lap shear joints with embedded precrack10.1016/S0266-3538(02)00054-4 ↗
7. Fatigue crack growth in adhesively bonded composite-metal double-lap joints10.1016/S0263-8223(02)00074-0 ↗
8. A finite element calculation of stress intensity factors by a modified crack closure integral10.1016/0013-7944(77)90013-3 ↗
9. The stresses in cemented joints10.1115/1.4009336 ↗
10. Mixed mode cracking in layered materials10.1016/S0065-2156(08)70164-9 ↗
11. G+D Computing Pty. Ltd. Strand 7 user manual. Sydney, Australia, 1999.
12. A comparison of two- and three-dimensional finite element analysis of adhesive joints10.1016/0143-7496(93)90042-8 ↗
13. Influence of the spew fillet and other parameters on the stress distribution in the single lap joint10.1080/00218468108073182 ↗