journal article·2008-04

Finite element analysis of bonded insulated rail joints

Anne K. Himebaugh, Raymond H. Plaut, David A. Dillard

Publisher page

Abstract

Insulated rail joints are installed at regular intervals to create signal blocks for detecting train positions and sometimes breaks in rails. Their lifetime may be significantly shorter than that of the rail. Failure may occur in the adhesive between the rail and the joint bars on the sides of the rail. A standard butt joint is considered, with the center of the joint supported by a tie. The finite element program ABAQUS is used. A static wheel load is applied, and the rail is also subjected to a tensile load. The vertical displacement of the rail and the shear and peel stresses in the epoxy are determined. The effects of the location of the wheel, size of the ties, and length and thickness of the joint bars are investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Railway Engineering and Dynamics · Mechanical stress and fatigue analysis · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Improving the performance of bonded insulated joints
2. Kerr · 2003
3. Frederick CO, Round DJ. Vertical track loading. In: Track technology. London: Thomas Telford; 1985, p. 135–49.10.1680/tt.02289.0015 ↗
4. Esveld · 2001
5. The effect of track and vehicle parameters on wheel/rail vertical dynamic forces
6. An investigation into the dynamic effects on the track of wheel flats on railway vehicles10.1243/JMES_JOUR_1979_021_046_02 ↗
7. Numerical analysis of a railroad bolt hold fracture problem10.1016/0167-8442(95)00026-B ↗
8. The dynamic effects of conventional freight car running over a dipped joint10.1076/vesd.31.2.95.2095 ↗
9. On the impact noise generation due to a wheel passing over rail joints10.1016/S0022-460X(03)00709-0 ↗
10. On initial condition transformation for response calculation using modal analysis method with application to wheel/rail impact10.1016/j.jsv.2003.10.001 ↗
11. Modelling of wheels and rail discontinuities in dynamic wheel–rail contact analysis10.1080/00423110600648535 ↗
12. Dynamic loading at rail joints
13. Analysis and tests of bonded insulated rail joints subjected to vertical wheel loads10.1016/S0020-7403(98)00042-3 ↗
14. Analysis of tapered, adhesively bonded, insulated rail joints10.1243/0954409JRRT107 ↗
15. Timoshenko beam finite element for vehicle—track vibration analysis and its application to jointed railway track10.1243/0954409041319687 ↗
16. Contact stress variations near the insulated rail joints10.1243/095440902321029217 ↗
17. The effect of proximity of a rail end in elastic–plastic contact between a wheel and a rail10.1243/095440903769012894 ↗
18. Contact–impact stress analysis of rail joint region using the dynamic finite element method10.1016/j.wear.2004.03.040 ↗
19. Talamini B, Jeong DY, Gordon J. Estimation of the fatigue life of railroad joint bars. In: Proceedings of the 2007 ASME/IEEE joint rail conference and internal combustion engine spring tech conference, Pueblo, CO, USA, 2007. Paper JRCICE2007-40065 (〈http://www.volpe.dot.gov/sdd/pubs-integrity.html〉; [28.08.2007], The Volpe National Transportation Systems Center, Cambridge, MA, USA).10.1115/JRC/ICE2007-40065 ↗
20. Profillidis · 2000
21. Indraratna · 2005
22. Hetényi · 1946
23. 2004
24. Himebaugh AK. Finite element analysis of insulated railroad joints. M.S. thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2006 〈http://scholar.lib.vt.edu/theses/available/etd-12152006-093621〉.
25. Dukkipati · 2000
26. Contact mechanics analysis of measured wheel–rail profiles using the finite element method10.1243/0954409011531404 ↗
27. Determination of the wheel rail contact patch in semi-Hertzian conditions10.1080/00423110412331327193 ↗
28. From railway dynamics to wheel/rail contact mechanics, an approach for the modelling of the wheel/rail contact: elasto-plastic response of the railhead10.1243/09544097F00905 ↗
29. Assessment of a semi-Hertzian method for determination of wheel–rail contact patch10.1080/00423110600677948 ↗
30. Rolling contact fatigue of rails—finite element modelling of residual stresses, strains and crack initiation10.1243/0954409001531207 ↗
31. Eckstein A, Lohse-Busch H, Dillard DA, Plaut RH. Shear and deflection analysis in conventional and tapered bonded insulated rail joints. Technical report. Virginia Polytechnic Institute and State University, Blacksburg, VA, 2005.