journal article·2025-01

Enhancing 3D printed PET physicochemical properties to prevent bacterial adhesion: Phenolic compound-based approach

Nouhaila Zouine, Safae Er raouan, Naima EL Ghachtouli‬, Soumya EL Abed, Saad Ibn Souda Koraichi

Publisher page

Abstract

Polyethylene terephthalate (PET) has emerged as a versatile and widely used polymeric material in the healthcare sector, particularly for medical device manufacturing, owing to its exceptional properties such as biocompatibility, high uniformity, and mechanical strength. However, the susceptibility of PET to bacterial adhesion remains a critical challenge in medical applications, potentially leading to serious complications for patients. In this study, we assessed, using the contact angle and scanning electron microscopy (SEM) techniques, the effectiveness of various phenolic compounds, including gallic acid (GA), tannic acid (TA), caffeic acid (CA) and epigallocatechin gallate (EGCG), in preventing the adhesion of Staphylococcus aureus and Pseudomonas aeruginosa to 3D printed PET surfaces. The results revealed that PET, initially hydrophobic (θ w = 75.7 ± 0.56° and ΔGiwi = −52.17 mJ/m 2), became hydrophilic after treatment with TA, GA and CA, enhancing its physicochemical properties. Additionally, GA demonstrated remarkable anti-adhesive efficacy against S.aureus with inhibition percentage of 97.4 %, whereas TA exhibited a high inhibition rate against P.aeruginosa (98.5 %). In contrast, PET remained qualitatively hydrophobic after treatment with EGCG, which showed limited anti-adhesive efficacy with a percentage of coverage by S.aureus and P.aeruginosa of 70.15 and 92.7 %, respectively. These findings contribute to the development of sustainable anti-adhesive surfaces for medical devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D Printing in Biomedical Research · Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Progressive 3D printing technology and its application in medical materials10.3389/fphar.2020.00122 ↗
2. Anisotropy reduction and mechanical property improvement of additively manufactured stainless steel based on cyclic phase transformation10.1016/j.jmst.2023.09.041 ↗
3. Surface quality related to face milling parameters in 3D printed carbon fiber-reinforced PETG10.3390/jcs8040128 ↗
4. Nanotwining induced by tensile fatigue and dynamic impact of laser powder bed fusion additively manufactured CoCrFeNi high-entropy alloy10.1016/j.jmst.2023.10.028 ↗
5. Current and emerging applications of 3D printing in medicine10.1088/1758-5090/aa7279 ↗
6. 3D printing technology: a new approach for the fabrication of personalized and customized pharmaceuticals10.1016/j.eurpolymj.2023.112240 ↗
7. Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering10.1186/s12903-023-03829-8 ↗
8. Modification of PET surfaces with gum Arabic towards its bacterial anti-adhesiveness using an experimental factorial design approach
9. Atmospheric plasma and UV polymerisation for developing sustainable anti-adhesive polyethylene terephthalate (PET) surfaces10.3390/coatings13040715 ↗
10. Optimising total knee replacement imaging: a novel 3D printed PET/CT anthropomorphic phantom for metal artefact simulation10.1186/s40658-024-00634-2 ↗
11. Construction of antibacterial poly(ethylene terephthalate) films via layer by layer assembly of chitosan and hyaluronic acid10.1016/j.carbpol.2016.02.008 ↗
12. Exploring the potential of polyethylene terephthalate in the design of antibacterial surfaces10.1007/s00430-020-00660-8 ↗
13. Synergistic effect of polyaniline coverage and surface microstructure on the inhibition of Pseudomonas aeruginosa biofilm formation10.1016/j.colsurfb.2016.11.014 ↗
14. Bacterial detection and differentiation of Staphylococcus aureus and Escherichia coli utilizing long-period fiber gratings functionalized with nanoporous coated structures10.3390/coatings13040778 ↗
15. Virtual screening and antimicrobial evaluation for identification of natural compounds as the prospective inhibitors of antibacterial drug resistance targets in Staphylococcus aureus10.1016/j.fitote.2023.105554 ↗
16. Theoretical and experimental investigations of Staphylococcus aureus and Pseudomonas aeruginosa adhesion on 3D printed resin10.1016/j.ijadhadh.2022.103234 ↗
17. Tannic acid with antiviral and antibacterial activity as a promising component of biomaterials—a minireview10.3390/ma13143224 ↗
18. Mechanisms of biofilm resistance to antimicrobial agents10.1016/S0966-842X(00)01913-2 ↗
19. Implication of surface properties, bacterial motility, and hydrodynamic conditions on bacterial surface sensing and their initial adhesion
20. Surface treatment strategies to combat implant-related infection from the beginning10.1016/j.jot.2018.09.001 ↗
21. Bacterial adhesion on femtosecond laser-modified polyethylene10.3390/ma12193107 ↗
22. Strategies for improving antimicrobial properties of stainless steel10.3390/ma13132944 ↗
23. Applications of tannic acid in membrane technologies: a review10.1016/j.cis.2020.102267 ↗
24. Can polyphenolic surface modifications prevent fungal colonization of titanium dental implants?10.1016/j.colsurfb.2022.112813 ↗
25. Recent developments in antibacterial or antibiofilm compound coating for biliary stents10.1016/j.colsurfb.2022.112837 ↗
26. Antimicrobial PLA-PVA multilayer films containing phenolic compounds10.1016/j.foodchem.2021.131861 ↗
27. Polyphenols: secondary metabolites with a biological impression10.3390/nu16152550 ↗
28. Tea stains-inspired antifouling coatings based on tannic acid-functionalized agarose10.1021/acssuschemeng.6b02737 ↗
29. Fabrication and characterization of a novel tannic acid coated boehmite/PES high performance antifouling NF membrane and application for licorice dye removal10.1016/j.cej.2020.125105 ↗
30. Electrospinning polyacrylonitrile (PAN) based nanofiberous membranes synergic with plant antibacterial agent and silver nanoparticles (AgNPs) for potential wound dressing
31. Bio-based tannic acid as a raw material for membrane surface modification10.1016/j.desal.2023.116535 ↗
32. Preparation, characterization and therapeutic properties of gum Arabic-stabilized gallic acid nanoparticles10.1038/s41598-020-71175-8 ↗
33. PVDF grafted Gallic acid to enhance the hydrophilicity and antibacterial properties of PVDF composite membrane10.1016/j.seppur.2020.118127 ↗
34. Comparative evaluation of antibacterial activity of caffeic acid phenethyl ester and PLGA nanoparticle formulation by different methods10.1088/0957-4484/27/2/025103 ↗
35. Preparation of caffeic acid grafted chitosan self-assembled micelles to enhance oral bioavailability and antibacterial activity of quercetin10.3389/fvets.2023.1218025 ↗
36. Evaluation of antibacterial activity of caffeic acid encapsulated by β -cyclodextrins10.3109/02652048.2015.1094531 ↗
37. Enhanced antibacterial, antioxidant and anticancer activity of caffeic acid by simple acid-base complexation with spermine/spermidine10.1080/14786419.2022.2038597 ↗
38. The antimicrobial activity of (-)-Epigallocatehin-3-Gallate and green tea extracts against Pseudomonas aeruginosa and Escherichia coli isolated from skin wounds10.5021/ad.2014.26.5.564 ↗
39. Antibacterial activity of epigallocatechin-3-gallate (EGCG) and its synergism with β-lactam antibiotics sensitizing carbapenem-associated multidrug resistant clinical isolates of Acinetobacter baumannii10.1016/j.phymed.2016.11.007 ↗
40. Antibacterial poly(ethylene terephthalate) surfaces obtained from thymyl methacrylate polymerization10.1002/pola.27647 ↗
41. Reduction of biofilm formation on 3D printing materials treated with essential oils major compounds10.1016/j.indcrop.2022.114864 ↗
42. Anti-adhesive activity of some secondary metabolites against Staphylococcus aureus on 3D printing medical materials10.1007/s00203-023-03562-4 ↗
43. Methods for in vitro evaluating antimicrobial activity: a review10.1016/j.jpha.2015.11.005 ↗
44. Catechin hydrate as an eco-friendly biocorrosion inhibitor for 304L stainless steel with dual-action antibacterial properties against Pseudomonas aeruginosa biofilm10.1016/j.corsci.2019.05.021 ↗
45. The effect of the Thymus vulgaris extracts on the physicochemical characteristics of cedar wood using angle contact measurement10.1080/01694243.2014.929197 ↗
46. Structure and reactivity of water at biomaterial surfaces10.1016/S0001-8686(97)00040-7 ↗
47. Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems10.1021/cr00088a006 ↗
48. Van Oss · 2006
49. Antibacterial activity and mode of action of ferulic and gallic acids against pathogenic bacteria10.1089/mdr.2012.0244 ↗
50. Phenolic compounds and in vitro antibacterial and antioxidant activities of three tropic fruits: persimmon, Guava, and Sweetsop10.1155/2016/4287461 ↗
51. Gallic acid potentiates the antimicrobial activity of tulathromycin against two key bovine respiratory disease (BRD) causing-pathogens10.3389/fphar.2018.01486 ↗
52. Major phenolic compounds, antioxidant and antibacterial activities of Anthemis praecox Link aerial parts10.1016/j.sajb.2020.02.018 ↗
53. Phytochemical composition, in vitro antioxidant activity and antibacterial mechanisms of Neolamarckia cadamba fruits extracts10.1080/14786419.2017.1323209 ↗
54. Synthesis of bio-based internal and external cross-linkers based on tannic acid for preparation of antibacterial superabsorbents10.1002/pat.4722 ↗
55. Tannins as an alternative to antibiotics10.1016/j.fbio.2020.100751 ↗
56. Anti-infective properties of epigallocatechin-3-gallate (EGCG), a component of green tea10.1111/bph.12009 ↗
57. Different susceptibilities of Staphylococcus and Gram-negative rods to epigallocatechin gallate10.1007/s10156-003-0284-0 ↗
58. The theoretical adhesion of Staphylococcus aureus and Pseudomonas aeruginosa as nosocomial pathogens on 3D printing filament materials10.1007/s12223-022-01028-6 ↗
59. Antibacterial and anti-biofilm efficacy of fluoropolymer coating by a 2,3,5,6-tetrafluoro-p-phenylenedimethanol structure10.1016/j.colsurfb.2016.12.020 ↗
60. Application of mixture design for the optimum antibacterial action of chemically-analyzed essential oils and investigation of the antiadhesion ability of their optimal mixtures on 3D printing material10.1016/j.bprint.2023.e00299 ↗
61. Hydrophilic and antifouling modification of PVDF membranes by one-step assembly of tannic acid and polyvinylpyrrolidone10.1016/j.apsusc.2019.04.057 ↗
62. Understanding the fundamental basis for biofilm formation on plastic surfaces: role of conditioning films10.3389/fmicb.2021.687118 ↗
63. Modification of PET surface properties using extremely non-equilibrium oxygen plasma10.1515/chem-2015-0061 ↗
64. Anti-biofouling and functionalizable bioinspired chitosan-based hydrogel coating via surface photo-immobilization10.1080/09205063.2019.1570435 ↗
65. Physicochemical analysis of initial adhesion and biofilm formation of Methanosarcina barkeri on polymer support material10.1016/j.colsurfb.2016.03.042 ↗
66. Poly(ethylene terephthalate) films modified by UV-induced surface graft polymerization of vanillin derived monomer for antibacterial activity10.1016/j.eurpolymj.2018.03.038 ↗
67. Inserting Menthoxytriazine into Poly(ethylene terephthalate) for inhibiting microbial adhesion10.1021/acsbiomaterials.1c01448 ↗
68. Effects of hydrophilicity/hydrophobicity of membrane on membrane fouling in a submerged membrane bioreactor10.1016/j.biortech.2014.10.058 ↗
69. Advances in biofouling mitigation: a review10.1080/10643389.2015.1114444 ↗
70. Inhibition of multi-species biofilm formation using chitosan-based film supplemented with essential oils10.1016/j.eurpolymj.2023.111943 ↗
71. Can superhydrophobic PET surfaces prevent bacterial adhesion?10.3390/nano13061117 ↗
72. Bacterial biofilm growth on 3D-printed materials10.3389/fmicb.2021.646303 ↗
73. pH-responsive and antibacterial properties of self-assembled multilayer films based on chitosan and tannic acid10.1016/j.msec.2019.110493 ↗
74. Antibiofilm coatings through atmospheric pressure plasma for 3D printed surgical instruments10.1016/j.surfcoat.2020.126163 ↗
75. Three-dimensional printed polylactic acid (PLA) surgical retractors with sonochemically immobilized silver nanoparticles: the next generation of low-cost antimicrobial surgery equipment10.3390/nano10050985 ↗