Numerical and experimental analysis of Al/GFRP joint for optimization of adhesive bonding strength using response surface method by considering surface patterning of the joints
Source abstract
Abstract
Nowadays, adhesive bonding of metals and composites is widely used in the aerospace, automotive and military industries. In the present research, the finite element analysis (FEA) and response surface method (RSM) are used to optimize adhesive bonding strength between aluminum (Al) and glass fiber reinforced polymer (GFRP). For this purpose, the influence of the parameters of joint type, groove shape, groove number, and groove angle was investigated on the bonding strength. The joint type includes Al/Al, Al/GFRP and GFRP/GFRP, the groove shape includes V-shape, square and concave, the groove number includes 1, 3 and 5 grooves, and the groove angle includes 0, 45 and 90°. In order to model the crack growth in the simulation of adhesive bonding, the cohesive zone model was applied. Finally, the optimal sample is fabricated to examine its strength in temperature-humidity environmental conditions. The results of simulation and optimization indicated that the bonding strength improved in Al/Al mode with one square groove at 0° groove angle. The stress-strain diagram obtained from the simulation and optimization results was in good agreement with the sample made under optimal conditions. Moreover, the tensile strength of the optimal sample at temperature-humidity conditions was higher than the tensile force of the sample without groove.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Metal Forming Simulation Techniques · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Failure analysis of AA8011-pultruded GFRP adhesively bonded similar and dissimilar joints10.1016/j.ijadhadh.2019.02.004 ↗
2. Experimental and finite element analysis of the long-term behaviour of GFRP-concrete hybrid beams fabricated using adhesive bonding10.1016/j.compstruct.2018.09.013 ↗
3. A simple and effective resin pre-coating treatment on grinded, acid pickled and anodised substrates for stronger adhesive bonding between Ti-6Al-4V titanium alloy and CFRP10.1016/j.surfcoat.2021.128072 ↗
4. Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres10.1016/j.compositesb.2019.107191 ↗
5. Effect of the extreme conditions on the tensile impact strength of GFRP composites10.1016/j.compstruct.2018.01.001 ↗
6. Optimizing adhesive bonding between CFRP and Al alloy substrate through resin pre-coating by filling micro-cavities from sandblasting10.1016/j.ijadhadh.2021.102952 ↗
7. Comparison of the effect of GFRP and steel reinforcement in concrete members subjected to compressive stress10.1088/1757-899X/1209/1/012061 ↗
8. Mechanical performance of timber connections made of thick flexible polyurethane adhesives10.1016/j.engstruct.2021.113125 ↗
9. A simple surface treatment and characterization of AA 6061 aluminum alloy surface for adhesive bonding applications10.1016/j.apsusc.2012.08.091 ↗
10. On quasi-static behaviors of different joint methods for connecting carbon fiber reinforce plastic (CFRP) laminate and aluminum alloy10.1016/j.tws.2021.107657 ↗
11. An experimental and numerical investigation of adhesive bond strength in Al-GFRP single lap and double butt lap joints due to applied longitudinal loads10.1080/17445302.2019.1659879 ↗
12. An investigation on fatigue life evaluation and crack initiation of Al-GFRP bonded lap joints under four-point bending10.1016/j.compstruct.2019.111433 ↗
13. Fatigue life evaluation of Al-GFRP bonded lap joints under four-point bending using strain-life criteria10.1016/j.ijadhadh.2023.103338 ↗
14. Fracture analysis and shear strength of aluminum/CFRP and GFRP adhesive joint in fiber metal laminates10.3390/ma13010007 ↗
15. Reinforcing an aluminum/GFRP co-cured single lap joint using inter-adherend fiber10.1016/j.compositesa.2008.02.002 ↗
16. Analysis and optimization of hybrid double lap aluminum-GFRP joints10.1016/j.compstruct.2014.05.044 ↗
17. Stress analysis of single lap joint using Al 6063 and GFRP as adherents with bond 108 as adhesive
18. Effect of temperature on the mechanical properties of adhesively bonded basalt FRP-aluminum alloy joints in the automotive industry10.1016/j.ijadhadh.2018.05.027 ↗
19. Failure analysis of adhesively bonded GFRP/aluminum matrix single composite lap joint with cold worked penetrative reinforcements10.1016/j.compositesb.2018.10.051 ↗
20. Experimental and numerical assessment of the effect of transverse reinforcing of AL-GFRP single lap adhesive joint using Z-pins under tensile loading10.1080/00218464.2021.1988577 ↗
21. M. Berczeli, Z. Weltsch, Improvement of adhesive joining of hybrid aluminum – GFRP using surface modifications, IOP conference series: materials science and engineering volume 448, XXIII international conference on manufacturing (manufacturing 2018)7–8 june 2018, Kecskemét, Hungary.10.1088/1757-899X/448/1/012050 ↗
22. Effect of cyclic hydrothermal accelerated ageing on the mechanical behavior of components in adhesively bonded aluminum/composite joints reinforced with z-pins
23. Nanosecond laser ablation for improving the strength of CFRTP and aluminum alloy adhesively bonded joints10.1016/j.compstruct.2021.114369 ↗
24. Nirthiha · 2024
25. Shear performance of timber-GFRP double-lap adhesive joints for civil engineering applications10.1080/01694243.2021.1998295 ↗
26. An experimental investigation of static and fatigue behavior of various adhesive single lap joints under bending loads subjected to hygrothermal and thermal conditions10.1080/00218464.2023.2270431 ↗
27. Numerical simulation and failure experiment of hygrothermal aged CFRP single and double lap joints10.1016/j.tws.2023.110786 ↗
28. The influence of curing conditions on the strength of adhesive joints10.1080/00218464.2019.1656615 ↗
29. Review on adhesive joints and their application in hybrid composite structures10.1080/01694243.2018.1543528 ↗
30. Strength of carbon/epoxy composite single-lap bonded joints in various environmental conditions10.1016/j.compstruct.2009.09.009 ↗
31. Atmospheric pressure plasma activation as a surface pre-treatment for the adhesive bonding of aluminum 202410.1080/01694243.2013.859646 ↗
32. The effect of materials and surface preparation on joining methods: a review10.1177/0731684415587543 ↗
33. Effectiveness of surface preparation on the capacity of plated reinforced concrete beams10.1016/j.istruc.2018.04.004 ↗
34. Selective laser ablation of CFRP composite to enhance adhesion bonding10.1080/10426914.2019.1644453 ↗
35. Surface properties of plastic materials in relation to their adhering performance10.1002/1527-2648(20020503)4:5<280::AID-ADEM280>3.0.CO;2-Z ↗
36. NaOH etching and resin pre-coating treatments for stronger adhesive bonding between CFRP and aluminium alloy10.1016/j.compositesb.2019.107478 ↗
37. Influence of acrylic adhesive viscosity and surface roughness on the properties of adhesive joint10.1080/00218464.2015.1051221 ↗
38. Influence of properties of materials for solventless lamination on the bonding strength of multilayer packaging
39. Failure analysis of AA8011-pultruded GFRP adhesively bonded similar and dissimilar joints10.1016/j.ijadhadh.2019.02.004 ↗
40. Modelling of a GFRP adhesive connection by an imperfect soft interface model with initial damage10.1016/j.compstruct.2020.112034 ↗
41. Strength and interface failure mechanism of adhesive joints10.1016/j.ijadhadh.2011.12.004 ↗
42. Experimental and numerical study on mechanical behavior of steel/GFRP/CFRP hybrid structure under bending loading with adhesive bond strength assessment10.3390/ma16145069 ↗
43. Characterization of fracture in adhesively bonded double-lap joints10.1016/j.ijadhadh.2009.05.002 ↗
44. Damage analysis of composite-aluminum adhesively-bonded single-lap joints10.1016/j.compstruct.2015.09.054 ↗
45. Numerical investigations on the damage tolerance of adhesively bonded pultruded GFRP joints with adhesion defects
46. Evaluation of crack growth behaviors under Mode I static loading for two-part polyurethane adhesives10.1016/j.ijadhadh.2022.103172 ↗
47. Improving the mechanical behavior of the adhesively bonded joints using RGO additive10.1016/j.ijadhadh.2016.07.014 ↗
48. Development of cohesive zone models for the prediction of damage and failure of glass/steel adhesive joints10.1016/j.ijadhadh.2019.102479 ↗
49. Numerical analysis of mixed-mode fatigue crack growth of adhesive joints using CZM10.1016/j.tafmec.2020.102493 ↗
50. Cohesive zone failure modeling of polymeric adhesives used in ceramic/metal armor10.1016/j.ijimpeng.2022.104364 ↗
51. The effect of graphene oxide nano‐platelets on fracture behavior of adhesively bonded joints10.1111/ffe.12612 ↗
52. Fatigue behavior of composite to aluminum single lap joints reinforced with graphene doped nylon 66 nanofibers10.1016/j.compstruct.2018.04.043 ↗
53. Effect of grooves on the strength of adhesively bonded joints10.1016/j.ijadhadh.2010.07.005 ↗
54. An experimental study on the effect of overlap length on the failure of composite-to-aluminum single-lap bonded joints10.1177/0731684407087074 ↗
55. Laser-induced groove optimization for Al/CFRP adhesive joint strength10.1016/j.ijadhadh.2021.102830 ↗
56. Shear strength of bonded joints of carbon fiber reinforced plastic (CFRP) laminates enhanced by a two-step laser surface treatment10.1016/j.compstruct.2019.111559 ↗
57. Comparative analysis between co-curing and adhesive bonding of glass-epoxy composite laminates and AA5083 aluminium sheets for Maritime application: effect of surface pattern10.1080/01694243.2022.2054603 ↗
58. Effects of groove angle and pattern on CFRP-to-concrete bond behavior of EBROG joints: Comparison of diagonal with longitudinal and transverse grooves10.1016/j.conbuildmat.2022.127980 ↗
59. Effect of laser generated microgrooves geometric parameters on the shear strength of CFRP-Aluminium alloy adhesive joints10.1080/00218464.2022.2158731 ↗
60. Optimizing the mechanical properties of Al-SS joint using the numerical and experimental investigation of electromagnetic welding10.1080/01694243.2021.1882765 ↗
61. Optimizing the mechanical properties of weld joint in laser welding of GTD-111 superalloy and AISI 4340 steel10.1016/j.optlastec.2022.108537 ↗
62. On the laser surface pre-treatment to enhance the surface texture, wettability and adhesion bonding strength of aluminium 7075-T6 laminates10.1080/09276440.2023.2235804 ↗