Review of nondestructive methods for evaluating adhesive bonding on anodized coatings
Source abstract
Abstract
The aerospace industry uses aluminum alloys which have a good strength-to-weight ratio, but they have poor corrosion resistance. Additionally, in some cases the aluminum surface may need to be exposed to the adhesive and attached to other equipment. Therefore, it is necessary to have a coating with both adhesive bonding and corrosion resistance. Most effectively, anodized coatings are used to achieve these goals. Oxides made by anodizing are porous and can improve the adhesive bonding of surfaces due to their porous structure. Anodizing is done by using various electrolytes and processes that affect adhesive bonding and adhesion strength dramatically. In this paper, we describe methods to assess the adhesive bonding of anodized surfaces. The evaluation methods are divided into two categories. Chemical analysis is performed on anodized surfaces in the first category, and in the second category, mechanical interlocking is evaluated.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Corrosion Behavior and Inhibition · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. A review on anodizing of aerospace aluminum alloys for corrosion protection
2. Vargelz · 2004
3. The sealing step in aluminum anodizing: a focus on sustainable strategies for enhancing both energy efficiency and corrosion resistance10.3390/coatings10030226 ↗
4. Measurement of surface forces and adhesion
5. Mechanisms of adhesion
6. Kinloch · 1987 · 18
7. A review on adhesively bonded aluminium joints in the automotive industry10.3390/met10060730 ↗
8. Towards Cr(VI)-free anodization of aluminum alloys for aerospace adhesive bonding applications: a review10.1007/s11705-017-1641-3 ↗
9. Theories of adhesion
10. Probing the formation and degradation of chemical interactions from model molecule/metal oxide to buried polymer/metal oxide interfaces10.1038/s41529-019-0085-2 ↗
11. Adhesion performance of an epoxy clear coat on aluminum alloy in the presence of vinyl and amino-silane primers10.1016/j.porgcoat.2006.09.007 ↗
12. Kinloch · 1983
13. Electronic theory of adhesion10.1063/1.1709192 ↗
14. Ebnesajjad · 2015
15. Surface preparation of metals
16. Review of surface pretreatments for aluminium alloys10.1016/S0143-7496(96)00014-0 ↗
17. Adhesion in bonded aluminium joints for aircraft construction10.1016/0143-7496(86)90016-3 ↗
18. Glow discharge optical emission spectrometer calibration using hydrogenated Zr-2.5Nb alloy standard samples10.3390/met8050372 ↗
19. Optical interference during rf-GDOES depth profiling of anodized aluminum-tantalum alloy films10.1007/s11665-013-0516-0 ↗
20. Highly ordered anodic porous alumina formation by self-organized anodizing
21. Sealing porous anodic layers on AA2024-T3 with a low viscosity benzoxazine resin for corrosion protection in aeronautical applications10.1039/C9RA01970G ↗
22. Nanoparticle characterization techniques
23. ATR-FTIR characterization of old pressure sensitive adhesive tapes in historic papers10.1016/j.culher.2016.03.005 ↗
24. Griffiths · 2007
25. The effect of different carboxylic acids on the sulfuric acid anodizing of AA2024
26. Engelhard · 2017 · 716
27. Watts · 2003
28. The effect of anodic aluminum oxide chemistry on adhesive bonding of epoxy
29. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
30. Surface area determination of porous materials using the Brunauer−Emmett−Teller (BET) method: limitations and improvements10.1021/acs.jpcc.9b02116 ↗
31. Development of a method for increasing BET surface area of rapid anodic alumina layers used as catalyst supports
32. Experimental study of the relationship between porosity and surface area of carbonate reservoir rocks10.1007/s13202-020-00838-z ↗
33. Leach · 2014
34. Surface topography and surfaces in contact
35. Jaturunruangsri · 2014 · 99
36. Whitehouse · 2002
37. Optical profilometer with confocal chromatic sensor for high-accuracy 3D measurements of the uncirculated and circulated coins10.30464/jmee.2018.2.3.181 ↗
38. 3-D profilometer using a CCD linear image sensor: application to skin surface topography measurement10.1111/j.1600-0846.1998.tb00096.x ↗
39. Estimation of surface modification methods effect on topography of dental implants by using metrological observation techniques10.12693/APhysPolA.129.625 ↗
40. Investigation of adhesive resistance of aluminum alloy by sandblasting and electrochemical machining10.3390/mi8030091 ↗
41. Preparation of hard super-hydrophobic films with visible light transmission10.1016/S0040-6090(00)01417-6 ↗
42. Criteria for entrapped gas under a drop on an ultrahydrophobic surface10.1021/la801092y ↗
43. Advancing and receding contact angle investigations for highly sticky and slippery aluminum surfaces fabricated from nanostructured anodic oxide10.1039/C8RA07712F ↗
44. Hierarchical roughness optimization for biomimetic superhydrophobic surfaces10.1016/j.ultramic.2007.04.011 ↗
45. Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction10.1016/j.pmatsci.2010.04.003 ↗
46. Scanning of skin gloss by a diffractive optical element-based handheld glossmeter10.1007/s10043-018-0462-z ↗
47. 2021 · 45°
48. Effects of alloy types on the gloss of anodized aluminum
49. Haugstad · 2012
50. Anodising as pre-treatment for structural bonding10.1016/S0143-7496(03)00071-X ↗
51. Investigation of adhesive resistance of aluminum alloy by sandblasting and electrochemical machining10.3390/mi8030091 ↗
52. AFM, SEM and TEM studies on porous anodic alumina10.1007/s11671-010-9538-9 ↗
53. A superhydrophilic aluminum surface with fast water evaporation based on anodic alumina bundle structures via anodizing in pyrophosphoric acid10.3390/ma12213497 ↗