Influence of interfacial micro-textures on CFRTP-TC4 hybrid joint formation with laser assistant joining technique
Source abstract
Abstract
To investigate the influence of interfacial micro-textures on the carbon fiber reinforced thermoplastic composites (CFRTP)-TC4 alloy hybrid joint formation process, a finite element model with micro-textures was established. The joint formation mechanism and the impact of joining parameters on heat input were analyzed. The results show that the existence of interfacial micro-textures will lead to an uneven distribution of the temperature field on the surface of polyamide and reduce the heat transferred to the surface of CFRTP. And, mechanical interlocks and new chemical bonds are generated in the joining process because of these micro-textures, which enhances the joining strengthen significantly. The optimized joining parameter window was also obtained and the joining strength was predicted by numerical simulation. With the numerical assistant, the CFRTP-TC4 joint with highest shear strength was obtained as the laser power and the welding speed is 130 W and of 2 mm/s, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Load-Bearing Analysis · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Recent advances in carbon-fiber-reinforced thermoplastic composites: a review10.1016/j.compositesb.2017.12.007 ↗
2. A Review of automotive lightweight technology
3. Assessment strategies for composite-metal joining technologies - a review10.1016/j.procir.2016.05.034 ↗
4. Joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM)10.1016/j.compstruct.2018.10.004 ↗
5. Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills10.1016/j.compstruct.2019.111727 ↗
6. Friction riveting of glass-fibre-reinforced polyetherimide composite and titanium grade 2 hybrid joints10.1016/j.matdes.2013.03.061 ↗
7. Effects of aramid-fibre toughening on interfacial fracture toughness of epoxy adhesive joint between carbon-fibre face sheet and aluminium substrate10.1016/j.ijadhadh.2013.09.023 ↗
8. Experimental study on CFRP-to-steel bonded interfaces10.1016/j.compositesb.2012.01.024 ↗
9. Failure mechanism of bonded joints with similar and dissimilar material10.1016/j.compositesb.2018.11.016 ↗
10. Fabrication processes of metal-fiber reinforced polymer hybrid components: a review10.1007/s42114-021-00393-z ↗
11. Review on joining process of carbon fiber-reinforced polymer and metal: methods and joining process10.1016/S1875-5372(19)30018-9 ↗
12. A new laser joining technology for direct-bonding of metals and plastics10.1016/j.matdes.2016.08.018 ↗
13. Effect of laser heat input on the interface morphology during laser joining of CFRTP and 6061 aluminum alloy10.1016/j.jmapro.2019.12.023 ↗
14. Laser direct joining of carbon fiber reinforced plastic to aluminum alloy
15. Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel10.1016/j.matdes.2012.12.015 ↗
16. Laser direct joining of carbon fibre reinforced plastic to stainless steel10.1179/1362171811Y.0000000060 ↗
17. Laser-assisted direct joining of ASI304 stainless steel with polycarbonate sheets: thermal analysis, mechanical characterization, and bonds morphology10.1016/j.optlastec.2016.09.028 ↗
18. CFRTP and stainless steel laser joining: thermal defects analysis and joining parameters optimization10.1016/j.optlastec.2018.01.023 ↗
19. Experimental and theoretical investigation of laser pretreatment on strengthening the heterojunction between carbon fiber reinforced plastic and aluminum alloy
20. Innovative approach of joining hybrid components10.2351/1.3600703 ↗
21. Laser joining of different polymer-metal configurations: analysis of mechanical performance and failure mechanisms10.1016/j.phpro.2016.09.002 ↗
22. Laser direct joining of CFRTP and aluminium alloy with a hybrid surface pre-treating method10.1016/j.compositesb.2019.106911 ↗
23. Effect of laser texturing on mechanical strength and microstructural properties of hot-pressing joining of carbon fiber reinforced plastic to Ti6A14V10.1016/j.jmapro.2021.03.021 ↗
24. Effect of the laser texturing width on hot-pressing joining of AZ31B and CFRTP10.1016/j.optlastec.2021.107350 ↗
25. A procedure for calibration and validation of FE modelling of laser-assisted metal to polymer direct joining10.1016/j.optlastec.2017.08.016 ↗
26. Optimization of laser-assisted joining through an integrated experimental-simulation approach10.1007/s00170-018-2113-8 ↗
27. A combined experimental and numerical approach to the laser joining of hybrid polymer-metal parts10.1016/j.phpro.2014.08.101 ↗
28. Simulation and optimization of continuous laser transmission welding between PET and titanium through FEM, RSM, GA and experiments10.1016/j.optlaseng.2013.04.021 ↗
29. Influence of defocus distance on laser joining of CFRP to titanium alloy10.1016/j.optlastec.2019.106006 ↗
30. Effect of scanning speed on laser joining of carbon fiber reinforced PEEK to titanium alloy10.1016/j.optlastec.2020.106273 ↗
31. Research on carbon fiber reinforced thermal polymer/stainless steel laser direct joining10.2351/1.5040627 ↗
32. CFRTP-Al alloy laser assisted joining with a high speed rotational welding technology10.1016/j.optlastec.2020.106187 ↗
33. Carbon fiber reinforced thermoplastic composites and TC4 alloy laser assisted joining with the metal surface laser plastic-covered method10.1016/j.compositesb.2021.108738 ↗