Modified graphene as potential additive for urea formaldehyde (UF) resin in medium density fiberboard (MDF) manufacturing
Source abstract
Abstract
In this study, graphene oxide (GO) and ethylenediamine-functionalized graphene oxide (EDA-GO) materials were used as a multifunction additive in a UF resin to test the relevant effects on the release of formaldehyde from medium density fiberboard (MDF). The GO was synthesized from graphite using the modified hummers method. Then, the as-synthesized GO was functionalized with ethylenediamine (EDA). The as-synthesized and modified nanomaterials were characterized by XRD, Raman Spectroscopy, AFM, and SEM-EDS techniques. These tests confirmed that the nanomaterials were of the required quality, and they were added to the resin to make the relevant panels. After making the boards, they were tested to determine their physical and mechanical properties, as well as formaldehyde emission based on relevant standards. Modulus of elasticity and formaldehyde emission reduction of the EDA-GO 3-treated MDF panel were with the highest values. On the contrary, the higher performance of GO than that of EDA-GO was observed in a thermal property (t 100°C ). Microstructure and polar increase in the graphite planes network, due to oxidation, may be considered for its GO effects. Amino-functionalization of graphene oxide planes is suggested as the cause of the minimum formaldehyde emission and the maximum modulus of elasticity in the EDA-GO-incorporated MDF board since resin reaction sites with formaldehyde were enhanced by increasing the amine group content.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Recycling and Waste Management Techniques · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. The formaldehyde dilemma10.1016/j.ijheh.2015.02.005 ↗
2. An investigation on formaldehyde emission characteristics of wood building materials in Chinese standard tests: product emission levels, measurement uncertainties, and data correlations between various tests10.1371/journal.pone.0144374 ↗
3. Emissions of formaldehyde and VOC from wood-based panels
4. The use of black liquor and nano-graphene oxide addition to urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard
5. Intrinsic flame-retardant urea formaldehyde/graphene nanocomposite foam: structure and reinforcing mechanism10.1002/pc.25028 ↗
6. Preparation, characterization, and properties of in situ formed graphene oxide/phenol formaldehyde nanocomposites
7. Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties10.1016/j.carbon.2013.12.050 ↗
8. Thermal conductivity of graphene-polymer composites: mechanisms, properties, and applications
9. Decreasing formaldehyde emission from medium density fiberboard panels produced by adding different amine compounds to urea formaldehyde resin,International10.1016/j.ijadhadh.2011.06.011 ↗
10. Addition of propylamine as formaldehyde scavenger for urea formaldehyde-bonded particleboard
11. Reducing formaldehyde emission of urea formaldehyde-bonded particleboard by addition of amines as formaldehyde scavenger10.1016/j.buildenv.2018.06.020 ↗
12. Graphene-based composite materials10.1038/nature04969 ↗
13. The structure of graphite oxide: investigation of its surface chemical groups10.1021/jp1002275 ↗
14. Functionalized graphene oxide with ethylenediamine and 1,6-hexanediamine10.1016/S1872-5805(12)60022-5 ↗
15. High-performance amino-functional graphene/CNT aerogel adsorbent for formaldehyde removal from indoor air10.4209/aaqr.2016.07.0312 ↗
16. Preparation of graphitic oxide10.1021/ja01539a017 ↗
17. Preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) with ethylenediamine-modified graphene oxide
18. Facile one-pot synthesis of graphene oxide by sonication assisted mechanochemical approach and its surface chemistry10.1166/jnn.2018.14306 ↗
19. Utilization of multiple graphene layers in ful cells10.1016/j.fuel.2010.03.036 ↗
20. Thermal and mechanical properties of urea-formaldehyde (UF) resin combined with multiwalled carbon nanotubes (MWCNT) as nanofiller and fiberboards prepared by UF-MWCNT10.1515/hf-2014-0038 ↗
21. 1993
22. 1993
23. 1993
24. 2014
25. Suryanarayana · 1998
26. Graphene materials with different structures prepared from the same graphite by the Hummers and Brodie methods10.1016/j.carbon.2013.08.009 ↗
27. Towards the understanding of the graphene oxide structure: how to control the formation of humic- and fulvic-like oxidized debris10.1016/j.carbon.2014.12.027 ↗
28. Studies of reduced graphene oxide and graphite oxide in the aspect of their possible application in gas sensors
29. Improved synthesis of graphene oxide10.1021/nn1006368 ↗
30. Synthesis of polyaniline-graphene nano-composites as the counter electrode in dye-sensitized solar cells
31. Rapid and non-destructive identification of graphene oxide thickness using white light contrast spectroscopy10.1016/j.carbon.2012.10.005 ↗
32. Eco-friendly reduced graphene oxide for the determination of mycophenolate mofetil in pharmaceutical formulations10.1016/j.jpha.2017.12.001 ↗
33. Baseri · 2016
34. Facile functionalization of graphene oxide with ethylenediamine as a solid base catalyst for Knoevenagel condensation reaction10.1016/j.catcom.2015.02.003 ↗
35. Influence of activated charcoalas filler on the properties of wood composites10.1016/j.ijadhadh.2013.05.017 ↗
36. DSC application for characterization of Urea/formaldehyde condensates10.1007/BF02663798 ↗
37. Dimensional crossover of thermal transport in few-layer graphene10.1038/nmat2753 ↗
38. Thermal flow self-assembled anisotropic chemically derived graphene aerogels and their thermal conductivity enhancement10.3390/nano9091226 ↗
39. Thermal conductivity of defective graphene oxide: a molecular dynamic study10.3390/molecules24061103 ↗
40. Wood fiber insulation material
41. Functionalized graphene oxide with ethylenediamine and 1, 6-hexanediamine10.1016/S1872-5805(12)60022-5 ↗
42. Thermal conductivity of graphene and graphene oxide nanoplatelets
43. The addition of functionalized graphene oxide to polyetherimide to improve its thermal conductivity and mechanical properties10.1002/pat.3369 ↗
44. Fabrication of amine functionalized graphene oxide – AgNPs nanocomposite with improved dispersibility for reduction of 4-nitrophenol10.1016/j.compositesb.2019.05.018 ↗
45. Solution properties of graphite and graphene10.1021/ja060680r ↗
46. Behavior of amine‐modified urea–formaldehyde‐bonded wood joints at low formaldehyde/urea molar ratios10.1002/app.1994.070520510 ↗
47. Pizzi · 1994 · 289
48. An unusual product obtained from condensation between ethylenediamine and formaldehyde in basic medium10.1016/j.tetlet.2005.05.081 ↗