The effect of inclusions embedded in the adhesive on the stress distribution and strength of single-lap adhesive joints: analytical and numerical analysis
Source abstract
Abstract
In this study, an analytical analysis and a finite element method (FEM) study of the overall strength and interfacial stress distribution of single lap joints with an embedded inclusion in the adhesive layer were performed. The stress analysis model for the single lap adhesive joints including inclusion layers was firstly established, and the effects of the thickness and stiffness of the inclusions on their mechanical strength were discussed in detail. The results show that the bond strength of the adhesive joints is highly dependent on the geometric parameters and properties of the inclusions, and increases with the inclusion thickness and stiffness. When the stiffness of inclusions is lower than that of the adhesive layers, their introduction degrades the bond strength of the single lap adhesive joints. The interface stress distribution and failure mechanism caused by the inclusion layers are intuitively analyzed by FEM, which is in good agreement with the analytical analysis.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Mechanical stress and fatigue analysis · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Effect of adhesive thickness and surface roughness on the shear strength of aluminium one-component polyurethane adhesive single-lap joints for automotive applications[J]10.1080/01694243.2016.1170588 ↗
2. Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys–A review [J]10.1016/j.compositesa.2017.06.007 ↗
3. Surface functionalization of micro silver flakes and their application in electrically conductive adhesives for electronic package[J]10.1016/j.ijadhadh.2013.09.036 ↗
4. An updated review of adhesively bonded joints in composite materials [J]10.1016/j.ijadhadh.2016.10.010 ↗
5. Mode-II fracture behavior evaluation for adhesively bonded pultruded GFRP/steel joint using four-point bending test [J]10.1016/j.tws.2021.108130 ↗
6. An introduction to structural health monitoring [J]
7. Sparse sensing detection of impact-induced delaminations in composite laminates [J]10.1016/j.compstruct.2015.08.052 ↗
8. The effect of embedded sensors on the strength of composite laminates [J]10.1177/073168449201100806 ↗
9. Analysis of damage in composite laminates with embedded piezoelectric patches subjected to bending action[J]10.1016/j.compstruct.2018.04.073 ↗
10. A novel dissimilar single-lap joint with interfacial stiffness improvement [J]
11. Stress distribution in double-lap adhesive joints: effect of adherend reinforcement layer [J]
12. Dynamic analysis of scarf adhesive joints in CFRP composites modified with Al2O3 -nanoparticles under fatigue loading at different temperatures [J]
13. Improved theoretical solutions for adhesive lap joints[J]10.1016/S0020-7683(97)00097-8 ↗
14. Stress distribution in double-lap adhesive joints: effect of adherend reinforcement layer [J]10.1016/j.ijadhadh.2020.102780 ↗
15. The effect of viscoelasticity of adhesives on shear stress distribution in a double-lap joint using analytical method [J]10.1080/01694243.2013.769085 ↗
16. Effect of hollow adherends on stress peak reduction in single-lap adhesive joints: FE and analytical analysis[J]10.1080/00218464.2021.1995368 ↗
17. Mathematical theory of equilibrium cracks formed in brittle fracture[J]
18. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements[J]10.1016/0008-8846(76)90007-7 ↗
19. Comparison of cohesive zone and continuum damage approach in predicting the static failure of adhesively bonded single lap joints10.1080/01694243.2016.1222048 ↗
20. Simulia · 2016
21. Effect of adhesive type and thickness on the lap shear strength[J]10.1080/00218460600948511 ↗
22. An updated review of adhesively bonded joints in composite materials[J]10.1016/j.ijadhadh.2016.10.010 ↗
23. Influence of adhesive thickness on local interface fracture and overall strength of metallic adhesive bonding structures[J]
24. An updated review of adhesively bonded joints in composite materials[J]10.1016/j.ijadhadh.2016.10.010 ↗
25. Adhesive joint strength of hybrid assemblies: titanium sheet-composites and aluminium sheet-composites—experimental and numerical verification[J]10.1016/j.ijadhadh.2010.05.006 ↗